HMGL Type
䂓Feature
Glazed metal film resistor 㵰HMGL㵱 series with high resistance .
㵰HMGL㵱 series are suitable for circuit protection for surges.
䂓Power Rating
䂓Dimensions 䂓Derating Curve
䃩Marking : (㫧2.0),J(㫧5.0) are 4 color code lines
䃩Body color : Brown
䂓Type Designation
HMGL
1/4 A 10M㱅 F TU
㽲 㽳 㽴 㽵 㽶 㽷
Paint Insulated Glazed Metal Film Fixed Resistors
㪲W㪴㪲
V㪴㪲
V] 㫧0.5 㫧1.0 㫧2.0 㫧5.0 㪲㷄㪴 㪲㷄㪴
A(㫧100ppm㪆㷄) 100k䌾10M 100k䌾10M 100k䌾10M 100k䌾10M
B(㫧250ppm㪆㷄) 100k䌾10M 100k䌾50M 100k䌾50M 100k䌾50M
A(㫧100ppm㪆㷄) 100k䌾10M 100k䌾30M 100k䌾30M 100k䌾30M
B(㫧250ppm㪆㷄)1
100k 100k 100k 100k
100k 100k 100k
100k
00k䌾10M 100k䌾50M 100k䌾50M 100k䌾
100M
A(㫧100ppm㪆㷄 䌾10M 䌾50M 䌾50M 䌾100M
B(㫧250ppm㪆㷄 䌾10M 䌾50M 䌾50M 䌾500M
1000
Tolerance㪲䋦㪴
R
at
i
ng
Ambient
Tem
p
.
750
500
1500
O
perat
i
ng
Temp.
Ran
g
e
HMGL1/4
T .C.R.
Resistance Range㪲㱅㪴
+70 -5 5䌾+125
Type Power
Rating
M
ax.
Working
Vo l t a
g
e
M
ax.
Overload
Vo l t a
g
e
HMGL 1
HMGL1/2
250
500
0.25
0.5
1.0
LD l d
HMGL1/4 6.4㫧0.8 2.3㫧0.5 27min. 0.6㫧0.1
HMGL1/2 9.5㫧1.0 3.5㫧1.0 38㫧3㫧
0.65 0.1
HMGL 1 14.2㫧1.6 4.8㫧1.0 38㫧31.0
㫧0.1
Dimensions(mm)
Type
Sy m bo l M ea n in g
1/4 0.25W
1/2 0.5W
11.0W
A㫧100ppm㪆㷄
B㫧250ppm㪆㷄
Standard Resist ance
E-24
,
E-96 Series
D㫧0.5㩼
F㫧1.0㩼
G㫧2.0㩼
J㫧5.0㩼
N
o Markin
g
Bulk
TU.TP Axial Tapin
g
RP Radial Tapin
g
Forming,
Packaging
㽷
㽴T.C.R.
㽶Tolerance
10M㱅
Resist ance
㽵
㽳Power Rating
PAINT INSULATED FIXED
GLAZED METAL FILM
RESIST ORS
HMGLType
㽲
llLD
dD/2
-55 070 125
0
50
100
Rated Power Ratio / %
Ambient Temp./㷄
䃩Rated Voltage: P䊶R (P=Rated power (W), R=Nominal resistance(㱅)) Rated Voltage shall be either the calculated rated voltage
or Max. Working Voltage whichever less.
"Type"indicates the product No., which is not the trademark. Specifications are subject to change without notice.
HOKURIKU
1
For detail description about resistance marking,
please refer to "General Specifications."
For detail description about forming and taping
specification, please refer to Taping Specification
page in "General Specifications."
HVL Type
䂓Feature
Glazed metal film resistor 㵰HVL㵱 are suitable for high voltage circuits.
䂓Power Rating
䂓Dimensions 䂓Derating Curve
䃩Marking : G(㫧2.0),J(㫧5.0) are 4 color code lines
䃩Body color:䋺:Brown
䂓Type Designation
HVL 1/4 10M㱅 F TU
㽲 㽳 㽴 㽵㩷㩷㩷㽶
Type Power
Rat ing
Max.
Working
Vo lt age
Resistance
Range Tolerance T.C.R.
Rat ing
Ambient
Temp.
Operating
Temp.
Range
㪲W㪴㪲
V㪴㪲㱅㪴㪲䋦㪴㪲
ppm㪆㷄㪴 㪲㷄㪴 㪲㷄㪴
D.C.1600
A.C.1150
D.C.3500
A.C.2500
+70 -55䌾+125
HVL1/2 0.50
HVL1/4 0.25 100k䌾 50M
100k䌾100M
㫧200
㫧1.0
㫧2.0
㫧5.0
LD l d
HVL1/4 6.4㫧0.8 2.3㫧0.5 27min. 0.6㫧0.1
HVL1/2 9.5㫧1.0 3.5㫧1.0 38㫧3㫧
0.65 0.1
Dimensions(mm)
Type
Sy m bo l M ea n in g
㽲Type HVL
HIGH VOLTAGE FIXED
GLAZED METAL FILM
RESIST ORS
1/4 0.25W
1/2 0.5W
St andard Resist ance
E-24,E-96 Series
F㫧1.0㩼
G㫧2.0㩼
J㫧5.0㩼
No Marking Bulk
TU,TP Axial Taping
RP Radial T aping
㽵
㽳Power Rating
10M㱅
Forming,
Packaging
㽶
Resist ance
Tolerance
㽴
lLl D
dD/2
-55 070 125
0
50
100
Rated Power Ratio / %
Ambient Temp./㷄
䃩Rated Voltage: P䊶R (P=Rated power (W), R=Nominal resistance(㱅)) Rated Voltage shall be either the calculated rated voltage
or Max. Working Voltage whichever less.
High Voltage Glazed Metal Film Fixed Resistors
For detail description about resistance marking,
please refer to "General Specifications."
For detail description about forming and taping
specification, please refer to Taping Specification
page in "General Specifications."
"Type"indicates the product No., which is not the trademark. Specifications are subject to change without notice.
HOKURIKU
2
