POWER COMBICON plugs with a 7.62 mm pitch PC 5 plugs The new PC 5 plug connection system is the logical further development of the classic POWER COMBICON PC 4. With a pitch of 7.62 mm all PC 5 plugs provide a nominal voltage of 600 V to UL. The maximum permissible current is 41 A. An integrated double steel spring ensures additional contact reliability, especially in the event of extreme power or temperature fluctuations. PC 5 is designed for 2 to 12 positions and the screw connection of stranded conductors up to 6 mm2 is established in accordance with the proven cage principle. A screw flange for securing the connection of the plug to the header is also included in the PC 5 range. Note: PC 5 plugs are compatible with the current PC 4 headers. COMBICON Select The COMBICON search engine with CAD downloading COMBICON Select - the printed circuit board connection software supports your workflow from the PCB and housing layout to the ordering process with: -Systematic and fast selection of products -Universal Internet aided engineering with extensive CAD downloading -Easy-to-use e-shopping functions. select.phoenixcontact.com/combicon Phoenix Contact GmbH & Co. KG * 32823 Blomberg, Germany Phone +49 52 35 3-00 * Fax +49 52 35 3-4 12 00 * www.phoenixcontact.com Local Contact: www.phoenixcontact.com/salesnetwork POWER COMBICON plugs PC 5/...-ST-7,62 7.62 mm Pitch No. of pos. Dim. a [mm] Type Order No. Pcs./Pkt. 2 3 7.62 15.24 PC 5/2-ST-7,62 PC 5/3-ST-7,62 19 75 58 7 19 75 59 0 50 4 5 6 22.86 30.48 38.10 PC 5/4-ST-7,62 PC 5/5-ST-7,62 PC 5/6-ST-7,62 19 75 60 0 19 75 61 3 19 75 62 6 7 8 9 45.72 53.34 60.96 PC 5/7-ST-7,62 PC 5/8-ST-7,62 PC 5/9-ST-7,62 19 75 63 9 19 75 64 2 19 75 65 5 10 11 12 68.58 76.20 83.82 PC 5/10-ST-7,62 PC 5/11-ST-7,62 PC 5/12-ST-7,62 19 75 66 8 19 75 67 1 19 75 68 4 (1) Coding profile, is inserted into the slot on the plug and header, red insulating material CP-HCC 4 16 00 02 7 100 (2) Screwdriver SZK PZ 1 12 06 45 0 10 (3) Marker card, with 12 pcs., 10-section marker strips, white self-adhesive, for 120 terminal blocks SK 7,62/3,8 (see COMBICON catalog) Description POWER COMBICON plugs, 7.62 mm pitch, color: green Technical data Dimensions Pitch [mm] Hole diameter [mm] Pin dimensions [mm]x[mm] Technical data in acc. with IEC/ DIN VDE Insulating material group - Surge voltage category / contamination class -/- Rated voltage [V] Rated surge voltage [kV] Nominal current / cross section [A]/[mm2] Maximum load current / cross section [A]/[mm2] Connection capacity Solid / stranded / conductor sizes [mm2]/[mm2]/AWG Stranded with ferrule without / with plastic sleeve [mm2] Multiple connection (2 conductors with same cross section) Solid / stranded [mm2] Stranded with ferrule without plastic sleeve [mm2] Stranded with TWIN ferrule with plastic sleeve [mm2] Stripping length [mm] Internal cylindrical gauge (IEC 60 947-1) - Thread - Torque [Nm] Insulating material Inflammability class in acc. with UL 94 Approval data (UL/CUL and CSA) Nominal voltage / current / conductor sizes UL/CUL: [V]/[A]/AWG CSA: [V]/[A]/AWG see description 7.62 -- -- I III / 2 1000 8 411) / 10 411) / 10 III / 3 800 8 II / 2 1000 6 0.2 - 10 / 0.2 - 6 / 24 - 8 0.25 - 6 / 0.25 - 4 10 A4 M3 PA V0 1 -- -- ) Observe derating curve a + 7 ,6 2 2 2 ,9 3 6 ,5 1 4 ,7 7 ,6 2 a PHOENIX CONTACT page 2 of 6 POWER COMBICON plugs PC 5/...-STF-7,62 7.62 mm Pitch No. of pos. Dim. a [mm] Type Order No. Pcs./Pkt. 2 3 7.62 15.24 PC 5/2-STF-7,62 PC 5/3-STF-7,62 19 75 69 7 19 75 70 7 50 4 5 6 22.86 30.48 38.10 PC 5/4-STF-7,62 PC 5/5-STF-7,62 PC 5/6-STF-7,62 19 75 71 0 19 75 73 2 19 75 73 6 7 8 9 45.72 53.34 60.96 PC 5/7-STF-7,62 PC 5/8-STF-7,62 PC 5/9-STF-7,62 19 75 74 9 19 75 75 2 19 75 76 5 10 11 12 68.58 76.20 83.82 PC 5/10-STF-7,62 PC 5/11-STF-7,62 PC 5/12-STF-7,62 19 75 77 8 19 75 78 1 19 75 79 4 (1) Coding profile, is inserted into the slot on the plug and header, red insulating material CP-HCC 4 16 00 02 7 100 (2) Screwdriver SZK PZ 1 12 06 45 0 10 (3) Marker card, with 12 pcs., 10-section marker strips, white self-adhesive, for 120 terminal blocks SK 7,62/3,8 (see COMBICON catalog) Description POWER COMBICON plugs, 7.62 mm pitch, color: green, with screw flange Technical data Dimensions Pitch [mm] Hole diameter [mm] Pin dimensions [mm]x[mm] Technical data in acc. with IEC/ DIN VDE Insulating material group - Surge voltage category / contamination class -/- Rated voltage [V] Rated surge voltage [kV] Nominal current / cross section [A]/[mm2] Maximum load current / cross section [A]/[mm2] Connection capacity Solid / stranded / conductor sizes [mm2]/[mm2]/AWG Stranded with ferrule without / with plastic sleeve [mm2] Multiple connection (2 conductors with same cross section) Solid / stranded [mm2] Stranded with ferrule without plastic sleeve [mm2] Stranded with TWIN ferrule with plastic sleeve [mm2] Stripping length [mm] Internal cylindrical gauge (IEC 60 947-1) - Thread - Torque [Nm] Insulating material Inflammability class in acc. with UL 94 Approval data (UL/CUL and CSA) Nominal voltage / current / conductor sizes UL/CUL: [V]/[A]/AWG CSA: [V]/[A]/AWG see description 7.62 -- -- I III / 2 1000 8 411) / 10 411) / 10 III / 3 800 8 II / 2 1000 6 0.2 -10 / 0.2 - 6/ 24 - 8 0.25 - 6 / 0.25 - 4 10 A4 M3 PA V0 1 -- -- ) Observe derating curve 7 ,6 1 a + 7 ,6 2 2 2 ,9 3 6 ,5 1 4 ,7 7 ,6 2 7 ,6 2 a PHOENIX CONTACT page 3 of 6 POWER COMBICON plugs with screw flange and shield, 7.62 mm pitch PC 5/...-STF-SH-7,62 The PC plug with shield provides a professional connection of the braided shield to prevent electrical interference. The largest possible contact of the shielded cable is decisive for compliance with EMC requirements and for high-quality shielding. To ensure optimum connection of the conductor with the shield, conventional metal cable clamps should be used (see photo). The shielded cable may also be connected to the engaged shield with a plastic cable tie. The screw integrated in the plug flange guarantees a perfect connection between the shroud and the metal front. POWER COMBICON PCB-SHIELD If the housing wall or front panel is not conductive, it is possible to route the shielding function on to POWER COMBICON PCB-SHIELD directly on the PCB via the flange screw (see photo). The 6.3/2.8 x 0.8 mm slip-on connection can then also be used to reach the next grounding point along the shortest possible route. PHOENIX CONTACT page 4 of 6 POWER COMBICON plugs PC 5/...-STF-SH-7,62 7.62 mm Pitch No. of pos. Dim. a [mm] Type Order No. Pcs./Pkt. 4 22.86 PC 5/4-STF-SH-7,62 19 75 80 4 25 (1) Coding profile, is inserted into the slot on the plug and header, red insulating material CP-HCC 4 16 00 02 7 100 (2) Screwdriver SZK PZ 1 12 06 45 0 10 (3) Marker card, with 12 pcs., 10-section marker strips, white self-adhesive, for 120 terminal blocks SK 7,62/3,8 (see COMBICON catalog) Description POWER COMBICON plugs, 7.62 mm pitch, color: green, with screw flange and shield Technical data Dimensions Pitch [mm] Hole diameter [mm] Pin dimensions [mm]x[mm] Technical data in acc. with IEC/ DIN VDE Insulating material group - Surge voltage category / contamination class -/- Rated voltage [V] Rated surge voltage [kV] Nominal current / cross section [A]/[mm2] Maximum load current / cross section [A]/[mm2] Connection capacity Solid / stranded / conductor sizes [mm2]/[mm2]/AWG Stranded with ferrule without / with plastic sleeve [mm2] Multiple connection (2 conductors with same cross section) Solid / stranded [mm2] Stranded with ferrule without plastic sleeve [mm2] Stranded with TWIN ferrule with plastic sleeve [mm2] Stripping length [mm] Internal cylindrical gauge (IEC 60 947-1) - Thread - Torque [Nm] Insulating material Inflammability class in acc. with UL 94 Approval data (UL/CUL and CSA) Nominal voltage / current / conductor sizes UL/CUL: [V]/[A]/AWG CSA: [V]/[A]/AWG see description 7.62 -- -- III / 3 800 8 I III / 2 1000 8 411) / 10 411) / 10 II / 2 1000 6 0.2 - 10 / 0.2 - 6 / 24 - 8 0.25 - 6 / 0.25 - 4 10 A4 M3 PA V0 -- -- 1 ) Observe derating curve 7 7 ,7 3 6 ,5 9 ,2 6 1 ,5 2 2 ,9 1 4 ,7 PHOENIX CONTACT page 5 of 6 4 8 ,9 6 7 ,6 2 2 2 ,8 6 1 4 ,5 6 1 0 1 2 ,5 2 POWER COMBICON headers with POWER COMBICON PCB-SHIELD PC 4/...-G-7,62 7.62 mm Pitch Dim. a [mm] No. of pos. Type Order No. Pcs./Pkt. PC 4/2-G-7,62 PC 4/4-G-7,62 18 04 79 7 18 04 81 0 50 50 (1) Coding profile, is inserted into the slot on the plug and header, red insulating material CP-HCC 4 16 00 02 7 100 (2) Shroud, connects the shield from the flange screw of the plug to the PCB with a 6.3/2.8 x 0.8 mm slip-on connection POWER COMBICON PCB-SHIELD 19 68 38 7 50 Description POWER COMBICON headers, 7.62 mm pitch, color: green 2 4 7.62 22.86 (3) Marker card, with 12 pcs., 10-section marker strips, white self-adhesive, for 120 terminal blocks SK 7,62/3,8 (see COMBICON catalog) Technical data see description 7.62 1.3 1 x 0.8 [mm] [mm] [mm]x[mm] - -/- [V] [kV] [A]/[mm2] [A]/[mm2] UL/CUL: [V]/[A]/AWG CSA: [V]/[A]/AWG IIIa III / 2 630 6 201) / -- 201) / -- PBT V0 III / 3 400 6 II / 2 630 6 -- -- 1) With PC 4/... plug, 41 A with PC 5/... plug 2 2 ,8 6 7 ,6 2 3 ,8 7 ,6 2 4 5 5 1 8 7 ,6 2 5 ,0 8 1 0 ,1 6 a + 7 ,6 2 5 ,5 4 2 9 7 ,6 2 2 7 ,6 2 3 ,8 a 1 ,7 1 ,3 PHOENIX CONTACT page 6 of 6 TNR: 102397-01-en/30.07.06 (c) PHOENIX CONTACT2006 Dimensions Pitch Hole diameter Pin dimensions Technical data in acc. with IEC/ DIN VDE Insulating material group Surge voltage category / contamination class Rated voltage Rated surge voltage Nominal current / cross section Maximum load current / cross section Insulating material Inflammability class in acc. with UL 94 Approval data (UL/CUL and CSA) Nominal voltage / current / conductor sizes