PC 5 plugs
The new PC 5 plug connection system is the logical
further development of the classic POWER
COMBICON PC 4. With a pitch of 7.62 mm all PC 5
plugs provide a nominal voltage of 600 V to UL. The
maximum permissible current is 41 A. An integrated
double steel spring ensures additional contact reliability,
especially in the e vent of e xtreme po wer or temper ature
fluctuations.
PC 5 is designed for 2 to 12 positions and the screw
connection of stranded conductors up to 6 mm
2
is
established in accordance with the proven cage
principle. A screw flange for securing the connection of
the plug to the header is also included in the PC 5
range.
Note:
PC 5 plugs are compatible with the current PC 4
headers.
POWER COMBICON plugs with a 7.62 mm pitch
Phoenix Contact GmbH & Co. KG • 32823 Blomberg, Germany
Phone +49 52 35 3-00 • Fax +49 52 35 3-4 12 00 • www.phoenixcontact.com
Local Contact: www.phoenixcontact.com/salesnetwork
COMBICON Select
The COMBICON search engine with CAD downloading
COMBICON Select – the printed circuit board connection software
supports your workflow from the PCB and housing layout to the
ordering process with:
–Systematic and fast selection of products
–Universal Internet aided engineering with extensive
CAD downloading
–Easy-to-use e-shopping functions.
select.phoenixcontact.com/combicon
PHOENIX CONTACT page 2 of 6
POWER COMBICON plugs
PC 5/...-ST-7,62
7.62 mm Pitch
Description No. of pos. Dim.
a
[mm]
Type Order No.
Pcs./Pkt.
POWER COMBICON plugs,
7.62 mm pitch,
color: green 2 7.62
3 15.24
4 22.86
5 30.48
6 38.10
7 45.72
8 53.34
9 60.96
10 68.58
11 76.20
12 83.82
PC 5/2-ST-7,62
PC 5/3-ST-7,62
PC 5/4-ST-7,62
PC 5/5-ST-7,62
PC 5/6-ST-7,62
PC 5/7-ST-7,62
PC 5/8-ST-7,62
PC 5/9-ST-7,62
PC 5/10-ST-7,62
PC 5/11-ST-7,62
PC 5/12-ST-7,62
19 75 58 7
19 75 59 0
19 75 60 0
19 75 61 3
19 75 62 6
19 75 63 9
19 75 64 2
19 75 65 5
19 75 66 8
19 75 67 1
19 75 68 4
50
(1)
Coding profile,
is inser ted into
the slot on the plug and header
,
red insulating material
CP-HCC 4 16 00 02 7
100
(2)
Screwdriver SZK PZ 1 12 06 45 0
10
(3)
Marker card,
with 12 pcs.,
10-section marker strips, white
self-adhesive, for 120 terminal blocks
SK 7,62/3,8
(see COMBICON catalog)
Technical data
Dimensions see description
Pitch [mm] 7.62
Hole diameter [mm] ––
Pin dimensions [mm]x[mm] ––
Technical data in acc. with IEC/ DIN VDE
Insulating material group – I
Surge voltage category / contamination class –/– III / 3 III / 2 II / 2
Rated voltage [V] 800 1000 1000
Rated surge voltage [kV] 8 8 6
Nominal current / cross section [A]/[mm
2
]41
1
) /
10
Maximum load current / cross section [A]/[mm
2
]41
1
) /
10
Connection capacity
Solid / stranded / conductor sizes [mm
2
]/[mm
2
]/AWG 0.2 - 10 / 0.2 - 6 / 24 - 8
Stranded with ferrule without / with plastic sleeve [mm
2
] 0.25 - 6 / 0.25 - 4
Multiple connection (2 conductors with same cross section)
Solid / stranded [mm
2
]
Stranded with ferrule without plastic sleeve [mm
2
]
Stranded with TWIN ferrule with plastic sleeve [mm
2
]
Stripping length
[mm] 10
Internal cylindrical gauge (IEC 60 947-1)
–A4
Thread
–M 3
Torque
[Nm]
Insulating material
PA
Inflammability class in acc. with UL 94 V0
Approval data (UL/CUL and CSA)
Nominal voltage / current / conductor sizes UL/CUL: [V]/[A]/AWG ––
CSA: [V]/[A]/AWG ––
1
) Observe derating curve
2 2 , 9
3 6 , 5
1 4 , 7
a + 7 , 6 2
7 , 6 2
a
PHOENIX CONTACT page 3 of 6
POWER COMBICON plugs
PC 5/...-STF-7,62
7.62 mm Pitch
Description No. of pos. Dim.
a
[mm]
Type Order No.
Pcs./Pkt.
POWER COMBICON plugs,
7.62 mm pitch,
color: green,
with screw flange 2 7.62
3 15.24
4 22.86
5 30.48
6 38.10
7 45.72
8 53.34
9 60.96
10 68.58
11 76.20
12 83.82
PC 5/2-STF-7,62
PC 5/3-STF-7,62
PC 5/4-STF-7,62
PC 5/5-STF-7,62
PC 5/6-STF-7,62
PC 5/7-STF-7,62
PC 5/8-STF-7,62
PC 5/9-STF-7,62
PC 5/10-STF-7,62
PC 5/11-STF-7,62
PC 5/12-STF-7,62
19 75 69 7
19 75 70 7
19 75 71 0
19 75 73 2
19 75 73 6
19 75 74 9
19 75 75 2
19 75 76 5
19 75 77 8
19 75 78 1
19 75 79 4
50
(1)
Coding profile,
is inser ted into
the slot on the plug and header
,
red insulating material
CP-HCC 4 16 00 02 7
100
(2)
Screwdriver SZK PZ 1 12 06 45 0
10
(3)
Marker card,
with 12 pcs.,
10-section marker strips, white
self-adhesive, for 120 terminal blocks
SK 7,62/3,8
(see COMBICON catalog)
Technical data
Dimensions see description
Pitch [mm] 7.62
Hole diameter [mm] ––
Pin dimensions [mm]x[mm] ––
Technical data in acc. with IEC/ DIN VDE
Insulating material group – I
Surge voltage category / contamination class –/– III / 3 III / 2 II / 2
Rated voltage [V] 800 1000 1000
Rated surge voltage [kV] 8 8 6
Nominal current / cross section [A]/[mm
2
]41
1
) /
10
Maximum load current / cross section [A]/[mm
2
]41
1
) /
10
Connection capacity
Solid / stranded / conductor sizes [mm
2
]/[mm
2
]/AWG 0.2 -10 / 0.2 - 6/ 24 - 8
Stranded with ferrule without / with plastic sleeve [mm
2
] 0.25 - 6 / 0.25 - 4
Multiple connection (2 conductors with same cross section)
Solid / stranded [mm
2
]
Stranded with ferrule without plastic sleeve [mm
2
]
Stranded with TWIN ferrule with plastic sleeve [mm
2
]
Stripping length
[mm] 10
Internal cylindrical gauge (IEC 60 947-1)
–A4
Thread
–M 3
Torque
[Nm]
Insulating material
PA
Inflammability class in acc. with UL 94 V0
Approval data (UL/CUL and CSA)
Nominal voltage / current / conductor sizes UL/CUL: [V]/[A]/AWG ––
CSA: [V]/[A]/AWG ––
1
) Observe derating curve
2 2 , 9
3 6 , 5
1 4 , 7
7 , 6 1 a + 7 , 6 2
7 , 6 2
a
7 , 6 2
PHOENIX CONTACT page 4 of 6
PC 5/…-STF-SH-7,62
The PC plug with shield provides a professional
connection of the braided shield to prevent electrical
interference. The largest possible contact of the
shielded cable is decisive for compliance with EMC
requirements and for high-quality shielding. To ensure
optimum connection of the conductor with the shield,
conventional metal cable clamps should be used (see
photo). The shielded cable may also be connected to
the engaged shield with a plastic cable tie. The screw
integrated in the plug flange guarantees a perfect
connection between the shroud and the metal front.
POWER COMBICON PCB-SHIELD
If the housing wall or front panel is not conductive, it is
possible to route the shielding function on to POWER
COMBICON PCB-SHIELD directly on the PCB via the
flange screw (see photo). The 6.3/2.8 x 0.8 mm slip-on
connection can then also be used to reach the next
grounding point along the shortest possible route.
POWER COMBICON plugs with screw flange and
shield, 7.62 mm pitch
PHOENIX CONTACT page 5 of 6
Description No. of pos. Dim.
a
[mm]
Type Order No.
Pcs./Pkt.
POWER COMBICON plugs,
7.62 mm pitch,
color: green,
with screw flange and shield 4 22.86
PC 5/4-STF-SH-7,62 19 75 80 4
25
(1)
Coding profile,
is inser ted into
the slot on the plug and header
,
red insulating material
CP-HCC 4 16 00 02 7
100
(2)
Screwdriver SZK PZ 1 12 06 45 0
10
(3)
Marker card,
with 12 pcs.,
10-section marker strips, white
self-adhesive, for 120 terminal blocks
SK 7,62/3,8
(see COMBICON catalog)
Technical data
Dimensions see description
Pitch [mm] 7.62
Hole diameter [mm] ––
Pin dimensions [mm]x[mm] ––
Technical data in acc. with IEC/ DIN VDE
Insulating material group – I
Surge voltage category / contamination class –/– III / 3 III / 2 II / 2
Rated voltage [V] 800 1000 1000
Rated surge voltage [kV] 8 8 6
Nominal current / cross section [A]/[mm
2
]41
1
) /
10
Maximum load current / cross section [A]/[mm
2
]41
1
) /
10
Connection capacity
Solid / stranded / conductor sizes [mm
2
]/[mm
2
]/AWG 0.2 - 10 / 0.2 - 6 / 24 - 8
Stranded with ferrule without / with plastic sleeve [mm
2
] 0.25 - 6 / 0.25 - 4
Multiple connection (2 conductors with same cross section)
Solid / stranded [mm
2
]
Stranded with ferrule without plastic sleeve [mm
2
]
Stranded with TWIN ferrule with plastic sleeve [mm
2
]
Stripping length
[mm] 10
Internal cylindrical gauge (IEC 60 947-1)
–A4
Thread
–M 3
Torque
[Nm]
Insulating material
PA
Inflammability class in acc. with UL 94 V0
Approval data (UL/CUL and CSA)
Nominal voltage / current / conductor sizes UL/CUL: [V]/[A]/AWG ––
CSA: [V]/[A]/AWG ––
1
) Observe derating curve
POWER COMBICON plugs
PC 5/...-STF-SH-7,62
7.62 mm Pitch
7 7 , 7
2 2 , 9
1 , 5
3 6 , 5
1 4 , 7
22,86
48,96
9 , 2 6
7 , 6 2
1 2 , 5
21 4 , 5
6
1 0
PHOENIX CONTACT page 6 of 6
Description No. of pos. Dim.
a
[mm]
Type Order No.
Pcs./Pkt.
POWER COMBICON headers,
7.62 mm pitch,
color: green 2 7.62
4 22.86
PC 4/2-G-7,62
PC 4/4-G-7,62 18 04 79 7
18 04 81 0
50
50
(1)
Coding profile,
is inser ted into
the slot on the plug and header
,
red insulating material
CP-HCC 4 16 00 02 7
100
(2)
Shroud
, connects the shield from the flange
screw of the plug to the PCB with a 6.3/2.8 x 0.8 mm
slip-on connection
POWER COMBICON PCB-SHIELD 19 68 38 7
50
(3)
Marker card,
with 12 pcs.,
10-section marker strips, white
self-adhesive, for 120 terminal blocks
SK 7,62/3,8
(see COMBICON catalog)
Technical data
Dimensions see description
Pitch [mm] 7.62
Hole diameter [mm] 1.3
Pin dimensions [mm]x[mm] 1 x 0.8
Technical data in acc. with IEC/ DIN VDE
Insulating material group – IIIa
Surge voltage category / contamination class –/– III / 3 III / 2 II / 2
Rated voltage [V] 400 630 630
Rated surge voltage [kV] 6 6 6
Nominal current / cross section [A]/[mm
2
]20
1
) /
––
Maximum load current / cross section [A]/[mm
2
]20
1
) /
––
Insulating material
PBT
Inflammability class in acc. with UL 94 V0
Approval data (UL/CUL and CSA)
Nominal voltage / current / conductor sizes UL/CUL: [V]/[A]/AWG ––
CSA: [V]/[A]/AWG ––
1
) With PC 4/... plug, 41 A with PC 5/... plug
POWER COMBICON headers with
POWER COMBICON PCB-SHIELD
PC 4/...-G-7,62
7.62 mm Pitch
7 , 6 2 7 , 6 2
2 2 , 8 6
3 , 8
5 , 5 4
5 , 0 8
1 0 , 1 6
2
7 , 6 2
1 , 31 , 7
7 , 6 2 2
51 8
4 5
2 9 a + 7 , 6
a
3 , 8 7 , 6 2
TNR: 102397-01-en/30.07.06 © PHOENIX CONTACT2006
