Rev. F 2009/06/18 10 | 8 7 | 6 5 4 | 3 2 1 47.00 | | 71.00 | - *OOTYP | | CENTER LINE OF 128.60 MIN FEATURE | 1.457295 1] ae nee | 7.35 UT _.| LL 12.00 A 165.00MAX A Q 0 7X 148.00MAX 7S 128.60 MIN l~ (12.00) So J 1.32 20.05 CENTER LINE OF 128.60 MIN FEATURE JX PART NO. (78378-XXXX) 4 25.60 MIN (2x) DATE CODE a | 14.10 MIN { 4 WG = ; (2X) \ u--------4 Lee --- A | | ccoun | T \L piv #1 INDICATOR | / | (2X) | PIN #1 | CUTAWAY1 /, #120 DIM seam | 57.00 81.00 MODULE SEATING PLANE 141.00 NOTES: _| l~ (11,50) (2X) (10.00 )MIN (2X) 4, MATERIAL : HOUSING - LCP, GLASS FILLED, UL 94V-0 COLOUR : BLACK. LATCH - NYLON, GLASS FILLED, UL 94V-0 COLOUR : SEE TABLE ON SHEET 6, TERMINAL : COPPER ALLOY. 2. FINISHES - SEE TABLE ON SHEET 6. 3, PRODUCT SPECIFICATION : RPS-78507-001 4, PACKAGING SPECIFICATION: PRODUCT SHALL BE PACKED IN TRAY . gSs DIMENSION STYLE SCALE] DESIGN UNITS . , S==| QUALITY] GENERAL TOLERANCES THIRD ANGLE SEE SHEET 5 SO S22) |sywpois| (UNLESS SPECIFIED) MM ONLY NTS METRIC [OCI PROJE dy ION 2740, . SSE Tm INCH __| DRAWN BY DATE __|TITLE 5, CARD SLOT ACCEPTS 1.2720.10MM MODULE THICKNESS 5 RES|1G7-0 CARES AKEEMEW 7008/0422 DDR3 DIMM, 1.00 PITCH (MEASURED FROM P.C. PADS). 9 6 + z /6\MOLEX LOGO, DATE & PART NO. INDICATED ON HOUSING 2s s 3 PLACES | ~~~ [eo-~ ie by a 240CK1S, LSP, STD LATCH ; we &ING/=0 [2 PLACES|+0.20 |[+--- _|CCTEH 2009/05/27 SMT, VERTICAL, LOWLLCR /I\MODULE SEATING PLANE FROM TOP OF PCB. Wi = 7 tt +-- 4+ =--- APPROVED BY DATE ax f2e\ T PLACE |t--__[3 faldx MOLEX INCORPORATED /A\KEEP OUT ZONE RESERVED FOR LATCH. WAS S| NG/0 ANGULAR +.3.SHLENI 2009/05/27] NaF /S\KEEP OUT AREA IS THE AREA WHERE THE CONNECTOR ae2e MATERIAL NO, DOCUMENT NO. SHEET NO. (INCLUDED LATCHES IN OPENING POSITION) IS MOUNTED ON THE PCB. /=QGe8 DRAFT WHERE APPLICABLE] SEE TABLE SD-78507-001 1 OF 6 AQ\KEEP OUT ZONE AS PER JEDEC SO-0%4. <0 G0 < WITT? bee es SZE| THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX 2 i A SIINCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION b_frame_A3_P_AM_T 8 7 | 6 | 5 | 4 | 3 | 2 110 9 8 7 | 6 | 5 4 3 2 1 133.75 20.10 7 [~ (12.00) TOP VIEW (LATCHES ARE IN OPENING POSITION) CENTER LINE OF 128.60 MIN FEATURE BOTTOM VIEW (LATCHES ARE IN OPENING POSITION) . AS = QUALITY GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS THIRD ANGLE QS S28] |sympois| (UNLESS SPECIFIED) MM ONLY NTS METRIC | Cl SRoyECTION a = = = mm INCH DRAWN BY DATE TITLE ISO VIEW Fm = lz\\G/-0 [ZPLACES[E--- _[4--- VJAKEEMEW 2009/04/22 DDR3 DIMM, 1.00 PITCH (LATCHES ARE IN OPENING PosiTiON = | 7S & 3 PLACES[#=-~ [=== [CHECKED BY DATE 240CKTS, LSP, STD LATCH US _|S|NG/=O [2 PLACES|#0.20 [+--- _|CCTEH 2009/05/27 SMT, VERTICAL, LOWLLCR qgengzze2|k 4 PLACE |--- +--- APPROVED BY DATE WARES S| \\G/-0 ANGULAR 3 > SHLENI 2009/05/27 rfole MOLEX INCORPORATED . S 3 4 2 MATERIAL NO. DOCUMENT NO. SHEET NO. SO Zee DRAFT WHERE APPLICABLE] SEE TABLE SD-78507-001 2 OF 6 W560 <_ WITHIN Bcc As SIZE | THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX 2 a A SIINCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION b_frame_A3_P_AM_T 9 8 7 Rev. F 2009/06/18 6 | 5 | 4 | 3 | 2 110 9 8 7 6 5 4 3 2 1 MODULE CARD DDR3 DUAL IN-LINE MEMORY MODULE FAMILY 1.00MM CONTACT CENTERS (JEDEC MO-269, ISSUE B, APRIL/06) F -| |/+2,70MAX 133,35 20.15 +} | 4.00MAX CENTER LINE OF DATUM A | [ CENTER LINE OF MODULE CARD 2100.15 (4X) 0.50MIN Nw [CENTER LINE OF DATUM F) | 2.B0MIN (4x) a 3,000.10 (4X) }@] 0.10 @IclB/A| E > Wy Z ry 4) r +0: 9.50 } 6 OMEN f 30.00 *5%5, { WON : 17.30 U LU 4 RO.70MAX TYP LT 4oomN [ATTIC | ACO ab / T P| DETAIL2 : KO DETAIL3 17 D [B | \ pin #1 DETAIL1 FLAT SURFACE 1.45MIN (8X) tl [1.00] TYP +} - 1270.0 Ih 5.175. (2X) 0.40 47,00 71.00 F-10400) 0,800.05 (240X) | 0.10 C|c[ala] \. -/ 0.05 Oc] \ Cc \ -_ \ A > \ (4.00 MIN) } 0.20 +0.15 0.20 Li (4X) | i 2.50 +0.20 LA 0.05 a | 0.40MIN TYP CHAMFER TIE BAR (OPTIONAL) lL _9.20 (yy B - KEEP OUT ZONE 0.05 [5.00] DETAIL2 DETAIL3 DETAIL1 NOTES: Go S25] Jouauty) GENERAL TOLERANCES DIMENSION STYLE SCALE [TEST ONTS 1 THIRD NGLE ___|1. RECOMMENDED PLATING FOR CONTACT PADS: 2 2S) [symsors} (UNLESS ec MM ONLY _NTS | METRIC PROECT PREFERRED: 0.76 MICROMETERS GOLD PLATING MIN A SR&lz W-0 7 PLACESIE-- 1 E JAKEEMEW 7009/04/22 DDR3 DIMM, 1.00 PITCH OVER 2.00 MICROMETERS NICKEL. ns i 3 PLACES |+- CHECKED BY DATE Z240CKTS, LSP, STD LATCH ALTERNATIVE: 0.05-0.75 MICROMETERS GOLD PLATING we 5 \/=0 2 PLACES|+0.20 [--- |CCTEH 2009/05/27 SMT, VERTICAL, LOWLLCR OVER 2.00 MICROMETERS NICKEL MUST USE AN ELECTRONIC aASzZa\4 1 PLACE [t--- _[4--- [APPROVED BY DATE holo ana a | ole A] , CONTACT GRADE CORROSIVE BARRIER LUBRICANT. Wo Sts \/-0 ANGULAR + 3 SHLENT - 2009/05/27| Z MOLEX INCORPORATED _ os HAMFER IS OPTIONAL AND IS NOT TO HIT THE GOLD PADS. ao2z29e So - - Z\-EADNG EDGE OF GOLD PADS SPECIFIED BY KCEPOUT ZONE <n BSS ae MUST REMAIN wera Snes CONTR a oo RE 73 WOLEX SHALL BE FREE OF BURRS AND EXTERNAL TIE BARS. 2 i WITHIN DIMENSIONS JA SlINCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION b_frame_A3_P_AM_T 9 3 7 | 6 | 5 | 4 | 3 | 2 1 Rev. F 2009/06/1840 9 8 7 | 6 | 5 4 3 2 1 kr 02.45 20.05 A 3.00|=| | KEEP OUT AREA 2.45 20.05 O.10[Z)x [e] ah 47.00 74,00 [PIN #121 PIN #240 7.75MIN : * { i eh - rq J fe ee net AL e_/ PIN #120 \ d DIM 'T's0.10 TYP 57.00 81.00 + (11,50 (2X) (141.00) (164.00) | ul i 2.10 20.03 (240X) 62.45+005 RECOMMENDED PCB THICKNESS = 157mm ~ 3.18mm - 0.702003 (240X) RECOMMENDED STENCIL THICKNESS = 150 MICROMETERS f 2.45 - L . a S = QUALITY] GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS THIRD ANGLE an ABH | 9 S22) |syweois| (UNLESS SPECIFIED) MM ONLY NTS METRIC [ Cl eroyection 245 . = = = mm INCH DRAWN BY DATE TITLE Fim SS RlZ\G/-0 [PLACES E--- [2--- JAKEEMEW 2009/04/22 DDR3 DIMM, 1.00 PITCH ns F 3 PLACES -==|t-== [CHECKED BY DATE 240CKTS, LSP, STD LATCH We _|8|NG/=0 [2 PLACES|+ 0.20 [+--- _|CCTEH 2009/05/27 SMT, VERTICAL, LOWLLCR QAszzZe|4 TPLACE [E--- |4--- APPROVED BY DATE WSES= |\-0 ANGULAR 32 SHLENI 2009/05/27 ifalex MOLEX INCORPORATED DETAIL4 O56 a MATERIAL NO. DOCUMENT NO. SHEET NO. See DRAFT WHERE APPLICABLE] SEE TABLE SD-78507-001 4 OF 6 <0 SO = WIT? Dee oNs | R25] THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX 2 i JA SIINCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION b_frame_A3_P_AM_T 9 8 7 | 6 | 5 | 4 | 3 | 2 1 Rev. F 2009/06/1810 9 8 7 6 5 4 3 2 1 VIEW FOR PACKAGING TRAY 330 7 sess0sees \ 360 am ~, 242 165 + 4 y Z Z H \e =a Fy YY T | 162 25 wv 12.35 32 j [ 39 ] << SECTION Y-Y - a = = QUALITY GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS THIRD ANGLE SECTION Z-Z 9 S228} |sywpois| (UNLESS SPECIFIED) _.. MM ONLY | NTS_| METRIC | Cl pRoJECTION . S=s mm INCH BRAWN Bye TWO, UBAFEA TT TThLE WS Z0T CS mm SR lZG/-0 [ZPLACESE--- [2--- JAKEEMEW 2009/04/22 DDR3 DIMM, 1.00 PITCH Ss a 3 PLACES|4=== [+--= [CHECKED BY DATE 240CKTS, LSP, STD LATCH TRAY A - NO. OF CAVITY = 2X 16 = 32PCS We GI\G/-O [2 PLACES|+0.20 [#- (CCTEH 2009/05/27 SMT, VERTICAL, LOWLLCR oozmzea|4 1 PLACE |--- +--- APPROVED BY DATE WAESS| |\G/-0 ANGULAR 4+ 3SHLENI 2009/05/27 rfalex MOLEX INCORPORATED a} 3 = a MATERIAL NO. DOCUMENT NO. SHEET NO. So 2Ee DRAFT WHERE APPLICABLE] SEE TABLE SD-78507-001 5 OF 6 WO =< WITHIN DIMENSIONS >ZE} THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX 2 i /A SIINCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION tb_frame_A3_P_AM_T 9 8 7 | 6 | 5 | 4 | 3 | 2 1 Rev. F 2009/06/18 10 9 8 7 6 5 4 3 2 1 F PART NO. VOLTAGE KEY POS. | DIM x PLATING OPTION oor TRAY TYPE LUBRICATION 78507-0001 B BLACK E 78507-0002 A 0.76LM (30HINCH) MIN, GOLD ON CONTACT. CENTER (15V) 3.94 2.54MM (I00MNCH) MIN, PURE TIN ON SOLDERTAIL. YES __| 1.27EM (SOMNCH) MIN. NICKEL UNDERPLATE. 78507-0003 B NATURAL (OFF-WHITE) D 78507-0004 A c B . a = = QUALITY GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS THIRD ANGLE GQ S22] |sywaois) (UNLESS SPECIFIED) MM ONLY NTS METRIC | Cl eRGeECTION G sss mm | INCH _| DRAW BY 09/04/22, ~=Ss@ D3: DIMM, 4,00 PITCH Em SS S)Z/\G/-0 [2 PLACES|E---_[e--- JAKEEMEW 2009/04/22 1. ts F 3 PLACES|--- +--- CHECKED BY DATE 240CKTS, LSP, STD LATCH US _|S\N/=0 [2 PLACES/0.20_[+--- _CCTEH 2009/05/27 SMT, VERTICAL, LOWLLCR ao saa 1 PLACE |--- ss APPROVED BY DATE A WA ES = |\G/-0 ANGULAR + 3 BHLEN | 2009/05/27 ifole MOLEX INCORPORATED Oo 3 a 2 MATERIAL NO. DOCUMENT NO. SHEET NO. ts DRAFT WHERE APPLICABLE] SEE TABLE SD-78507-001 6 OF 6 fimo <_ wie De os SIZE THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX 2 i INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION tb_frame_A3_P_AM_T 9 8 7 | 6 | 5 | 4 | 3 | 2 A Rev. F 2009/06/18