Emboss Tape SHL CONNECTOR 1.0mm pitch/Disconnectable Crimp style connectors Specifications ------------------- * Current rating: 1.0A AC, DC (AWG #28) * Voltage rating: 50V AC, DC * Temperature range: -25C to +85C (including temperature rise in applying electrical current) * Contact resistance: Initial value/20m max. After environmental testing/40m max. * Insulation resistance: 100M min. * Withstanding voltage: 500V AC/minute * Applicable wire: AWG #32 to #28 * Compliant with RoHS. * Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog. * Contact JST for details. Standards ---------------------- * Thin design * Low insertion force * Deformation preventive design 0 Recognized E60389 1 Certified LR20812 PC board layout (viewed from component side) and Assembly layout Normal type 0.6 Offset type 0.6 1.0 7.2 1.0 0.7 7.2 0.9 1.0 1.4 1.7 3.85 5.1 4.50.1 PC board 0.7 0.7 Header outline 1.2 4.3 1.8 1.7 3.35 4.6 4.3 Header outline 1.55 1.6 0.9 Note: 1. Tolerances are non-cumulative: 0.05mm for all centers. 2. The dimensions above should serve as a guideline. Contact JST for details. Contact Model No. mm2 SSHL-003T-P0.2 4.75 Applicable wire Insulation O.D. (mm) AWG# 0.0320.08 2.0 3228 0.40.8 Q'ty / reel 30,000 Material and Finish 0.5 0.8 2.35 0.8 0.4 Phosphor bronze, tin-plated (reflow treatment) RoHS compliance Note: Contact JST for gold-plated products. Contact Crimping machine Crimp applicator SSHL-003T-P0.2 AP-K2N Applicator Dies Crimp applicator with dies MKS-L-10-3 MK/SSH/L-003-02 APLMK SSH/L003-02 *MKS-SC SC/SSH/L-003-02 APLSC SSH/L003-02 Note: *Strip-crimp applicator Contact JST for applicable wires in case that it is not usable due to wire size. 1 SHL CONNECTOR Housing Circuits 2 5 Marking by every 5 circuit Circuit No.1 mark 6 1.75 7 5.7 2.9 8 10 11 12 14 16 20 1.0 1.15 22 A B 26 30 Dimensions (mm) Model No. With protrusions SHLP-02V-S-B SHLP-05V-S-B SHLP-06V-S-B SHLP-07V-S-B SHLP-08V-S-B SHLP-10V-S-B SHLP-11V-S-B SHLP-12V-S-B SHLP-14V-S-B SHLP-16V-S-B SHLP-20V-S-B SHLP-22V-S-B SHLP-26V-S-B SHLP-30V-S-B A B Q'ty / box 1.0 4.6 6,000 4.0 7.6 3,000 5.0 8.6 3,000 6.0 9.6 3,000 7.0 10.6 3,000 9.0 12.6 2,000 10.0 13.6 2,000 11.0 14.6 2,000 13.0 16.6 2,000 15.0 18.6 1,000 19.0 22.6 1,000 21.0 24.6 1,000 25.0 28.6 1,000 29.0 32.6 1,000 Material PBT, UL94V-0, natural (white) RoHS compliance Shrouded header Model No. Normal type Circuits B A 4.3 0.7 1.75 1.0 Circuit No.1 Offset type B A 1.4 1.75 4.3 Circuit No.1 1.2 Offset type 2 SM02B-SHLS-TF -- 5 SM05B-SHLS-TF -- 4.0 7.8 -- -- 4,500 6 SM06B-SHLS-TF -- 5.0 8.8 -- -- 4,500 7 SM07B-SHLS-TF -- 6.0 9.8 -- -- 4,500 8 SM08B-SHLS-TF -- 7.0 10.8 -- -- 4,500 10 SM10B-SHLS-TF -- 9.0 12.8 -- -- 4,500 11 SM11B-SHLS-TF -- 10.0 13.8 -- -- 4,500 12 SM12B-SHLS-TF -- 11.0 14.8 -- -- 4,500 14 SM14B-SHLS-TF SM14B-SHLS-1-TF 13.0 16.8 13.0 18.0 4,500 16 SM16B-SHLS-TF 20 SM20B-SHLS-TF SM20B-SHLS-1-TF 19.0 22.8 19.0 24.0 4,500 22 SM22B-SHLS-TF -- 21.0 24.8 -- -- 4,500 26 SM26B-SHLS-TF -- 25.0 28.8 -- -- 4,500 30 SM30B-SHLS-TF -- 29.0 32.8 -- -- 4,500 -- 15.0 18.8 -- -- 4,500 Material and Finish 1.4 1.0 Normal type Insulation O.D. (mm) Q'ty / Normal type Offset type reel A B A B 1.0 -- 4,500 4.8 -- Contact: Phosphor bronze, copper-undercoated, tin-plated (reflow treatment) Housing: PA, UL94V-0, natural (ivory) Solder tab: Brass, copper-undercoated, tin-plated (reflow treatment) RoHS compliance This product displays (LF)(SN) on a label. Note: Contact JST for the headers with gold-plated pins. 2