FC Type Fiber Optic Connectors MU HRFC Series SC FC Harsh Environment Features 1. JIS, IEC standards compliantand and fully intermateable with NTT's FC products. JIC C 5970 (F01 type fiber optic connectors). IEC 61754-13 Attenuators 2. Two types of plug frames Conventional cutout key ring types and molded key ring types are available. Important Notice Plug key width : 2.1mm Adapter key width : 2.2mm Terminators Applications Public communications lines, CATV, Test equipment, etc. 47 Product Specifications MU Ratings Operating temperature range Insertion Loss Return Loss Test Method (IEC 61300) Attenuators Specifications 0.5dB max. (PC, AdPC, APC) (GI) Wavelength 1310nm (LED) 0.3dB max. (PC) (SM) (GI) Wavelength 1310nm (LD) 22dB min.(PC) 40dB min.(AdPC) 60dB min. (APC) 22dB min. (PC) Ferrule withdrawal Extract Zirconia gauge 2.499 0.0005 mm dia from split sleeve. Copper alloy split sleeve Zirconia split sleeve Cable retention (Straight pull) 98N tensile load for minute. 1) Insertion loss fluctuation after test: 0.2dB max. 2) No visible damage, dislocation of clamp or cable. Durability (cycles, mating/un-mating) 1000 times Vibration Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 axis. Shock Acceleration of 981 m/s2, 6 ms duration, sin half-wave waveform, 10 cycles in each of the 3 axis. Humidity (Temperature/ humidity- cycles) -10C to 65C, humidity: 90% to 96% 20 cycles Change of temperature -40C to +70C 42 cycles (Complies with Telcordia standard GR-326-CORE) Dry heat 960 hours at 85C Cold 960 hours at -25C Salt mist 48 hours in a 5% concentration of salt mist Part Terminators -25C to +70C Wavelength 1310nm (LD) Materials 48 Storage temperature range (SM) Harsh Environment Environmental Characteristics FC SC Mechanical Characteristics Optical Characteristics Item -25C to +70C Material Plug housing Brass, Stainless steel or Zinc alloy Spring Stainless steel Ferrule Zirconia Adapter Brass Split sleeve Copper alloy Receptacle Brass Attenuator housing Stainless steel 2N to 5.9N 2N to 3.9N 1) Insertion loss fluctuation after test: 0.2dB max. 2) No visible damage, cracks or part dislocation. No significant corrosion. FC products Key width 2.1mm Cutout keying ring type For 3 mm cable, Molded keying ring type Cutout keying ring type For 0.9 mm fiber, Molded keying ring type Cutout keying ring type SC For 2 mm cable, Molded keying ring type MU Plug Housing Single mode Ferrule Multi mode FC Adapter Standard type Solid Body type Key width 2.2mm HRFC-type Connector Round type FC to SC Harsh Environment Conversion adapter Flange type FC to SC Receptacle Attenuators Dust cap Fixed type Attenuator Single mode GI Terminators Variable type Single mode Terminator 49 Molded keying ring type (Key width 2.1mm) For 2mm cable O10 SC M80.75 MU 52.8 Part Number CL No. Boot color HRFC-P8-H2(21) 701-0075-3-21 Blue PC HRFC-P8-L2(21) 701-0077-9-21 Light purple AdPC HRFC-P8-G2(21) 701-2001-8-21 Green APC For 3mm cable M80.75 52.8 O10 FC Polishing type Part Number CL No. Boot color Polishing type HRFC-P8-H3(21) 701-0074-0-21 Blue PC HRFC-P8-L3(21) 701-0078-1-21 Light purple AdPC HRFC-P8-G3(21) 701-2002-0-21 Green APC For 0.9mm fiber O10 Attenuators M80.75 Harsh Environment 30.8 Part Number CL No. Boot color Polishing type HRFC-P15-H(21) 701-0114-3-21 Blue PC HRFC-P15-L(21) 701-0115-6-21 Light purple AdPC HRFC-P15-G(21) 701-2004-6-21 Green APC Tool Terminators Crimp tool Part Number CL No. Applicable connector HSC-T3 704-0287-0 HRFC-P8-H2,L2,G2, HRFC-P8-H3,L3,G3, <Locations> (1)2mm Jacket crimping: section A 3mm Jacket crimping: section C (2)KevlarTM crimping: section B 50 Cutout keying ring type (Key width 2.1mm) MU For 2mm cable O10 M80.75 37.8 CL No. 701-0001-7-04 SC Part Number HRFC-P1-H(04) For 3mm cable O10 FC M80.75 37.8 Part Number CLNo. HRFC-P1-H 701-0001-7 Harsh Environment For 0.9mm fiber M80.75 O10 27.8 CL No. HRFC-P6-H 701-0041-1 Attenuators Part Number Terminators 51 Adapters (Key width 2.2mm) Solid Body type 15 4 MU M80.75 15 9.5 M80.75 BPanel Cutout O9 or 2-O2.4 SC +0.2 0 1.5 s ter .2 O2 Coun 4 O Standard Body type 2-M20.4 9.5 15 FC-A th ep d ink +0.5 0 13.40.1 Board thiekness : 16mm Part Number CL No. Split sleeve HRFC-PA11-G1 701-0071-2 Copper alloy HRFC-PA11-D1 701-0106-5 Zirconia Remarks (Note) Note:Please take utmost care when inserting FC plug into a FC adapter. When applying excessive force to the FC plug or inserting in an odd angle, the zirconia sleeve within the adapter might be dameged. 15 15 4 9.5 BPanel Cutout O9+0.5 0 2--M80.75 2--M20.4 or 2--O2.4 +0.2 0 FC FC-A O2.2 O4 Countersink depth 1.5 Part Number CL No 13.40.1 Mark Split sleeve HRFC-PA1-G1(02) 701-0014-9-02 FC-AP Copper alloy HRFC-PA1-D1(02) 701-0089-8-02 FC-AA Zirconia Board thiekness : 16mm Remarks (Note) Harsh Environment Note:Please take utmost care when inserting FC plug into a FC adapter. When applying excessive force to the FC plug or inserting in an odd angle, the zirconia sleeve within the adapter might be dameged. Flange type BPanel Cutout 15 2 O9 +0.5 0 2--M80.75 O19 13.45 2--M20.4 or 2--O2.4 +0.2 0 Attenuators 2- O2.2 2--O4 Countersink depth 1.5 Round type 13.40.1 Part Number CL No. Split sleeve HRFC-PA4-G1 701-0068-8 Copper alloy HRFC-PA4-D1 701-0112-8 Zirconia Remarks (Note) Note:Please take utmost care when inserting FC plug into a FC adapter. When applying excessive force to the FC plug or inserting in an odd angle, the zirconia sleeve within the adapter might be dameged. 15 O8 Terminators 2-M8x0.75 Part Number CL No. Split sleeve HRFC-A2-SF(01) 701-0039-0-01 Copper alloy HRFC-A2-SF-D1 ----- Zirconia Remarks (Note) Note:Please take utmost care when inserting FC plug into a FC adapter. When applying excessive force to the FC plug or inserting in an odd angle, the zirconia sleeve within the adapter might be dameged. 52 Conversion adapters FC / SC BPanel Cutout 21.2 5.5 3.5 12.2 15 O9+0.5 0 MU 2--M20.4 or 2--O2.4 +0.2 0 12.8 O19 2--M80.75 13.40.1 9 13.4 Board thiekness : 16mm Part Number CL No. Split sleeve HSCJ-HRFCJ-B(51) 704-0021-3-51 Copper alloy SC 7.4 O19 9.15 15 FC / SC 13.7 (3.9) 9 12.8 32 CL No. 701-0065-0-51 Split sleeve Polishing type Fiber type HRFCP-HSCJ-1AS(51) 701-0108-0-51 HRFCP-HSCJ-2(51) 701-0085-7-51 PC HRFCP-HSCJ-2AS(51) 701-0109-3-51 AdPC PC Copper alloy FC Part Number HRFCP-HSCJ-1(51) GI-50/125 AdPC SM-9.5/125 FC / SC Harsh Environment 9 12.8 M80.75 7.4 9.4 21 27.9 (1.8) Part Number Split sleeve 704-0203-0-51 HSCP-HRFCJ-1AS(51) 704-0288-3-51 HSCP-HRFCJ-2(51) 704-0204-3-51 HSCP-HRFCJ-2AS(51) 704-0289-6-51 3 PC Copper alloy 5.5 GI-50/125 AdPC PC SM-9.5/125 AdPC BPanel Cutout M15 9 Polishing type Fiber type Attenuators Receptacle CL No. HSCP-HRFCJ-1(51) M9.5 O9 +0.5 0 Terminators 4--M20.4 or 4--O2.4 +0.2 0 M80.75 FC-A 4- O2.2 O4 Countersink depth 1.5 9.50.1 Part Number HRS No. Remarks HRFC-R1 701-0016-4 MM HRFC-R2 701-0023-0 SM 53 Ferrule Same as SC ferrules MU Refer to page 33 for details. Terminators Attenuators Harsh Environment FC SC Dust Cap 54 Part Number CL No. HRFC-C1 701-0019-2