MU SC FC Harsh
Environment Attenuators Terminators
47
FC Type Fiber Optic Connectors
HRFC Series
■Features
1. JIS, IEC standards compliantand and fully intermateable with NTT's FC products.
JIC C 5970 (F01 type fiber optic connectors).
IEC 61754-13
2. Two types of plug frames
Conventional cutout key ring types and molded key ring types are available.
Important Notice
Plug key width : 2.1mm
Adapter key width : 2.2mm
■Applications
Public communications lines, CATV, Test equipment, etc.
48
MUSCFC
Harsh
Environment
AttenuatorsTerminators
Optical
Characteristics
Mechanical Characteristics
Environmental
Characteristics
Part Material
Plug housing Brass, Stainless steel or Zinc alloy
Spring Stainless steel
Ferrule Zirconia
Adapter Brass
Split sleeve Copper alloy
Receptacle Brass
Attenuator housing Stainless steel
■Product Specifications
Ratings Operating temperature range
-25°C to +70°C
(SM)
(GI)
Storage temperature range -25°C to +70°C
■Materials
Item Test Method (IEC 61300) Specifications
Insertion Loss Wavelength 1310nm (LD) 0.5dB max. (PC, AdPC, APC)
Wavelength 1310nm (LED) 0.3dB max. (PC)
Return Loss Wavelength 1310nm (LD)
22dB min.(PC) 40dB min.(AdPC) 60dB min. (APC)
22dB min. (PC)
Ferrule withdrawal Extract Zirconia gauge 2.499 ±0.0005 mm Copper alloy split sleeve 2N to 5.9N
dia from split sleeve. Zirconia split sleeve 2N to 3.9N
Cable retention 1)
Insertion loss fluctuation after test: 0.2dB max.
(Straight pull) 2)
No visible damage, dislocation of clamp or cable.
Durability 1000 times
(cycles, mating/un-mating)
Vibration
Shock
Humidity -10°C to 65°C, humidity: 90% to 96% 20 cycles
(Temperature/ humidity- cycles)
Change of temperature -40°C to +70°C 42 cycles
(Complies with Telcordia standard GR-326-CORE)
Dry heat 960 hours at 85°C
Cold 960 hours at -25°C
Salt mist 48 hours in a 5% concentration of salt mist No significant corrosion.
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm,
2 hours in each of the 3 axis.
98N tensile load for minute.
Acceleration of 981 m/s2, 6 ms duration,
sin half-wave waveform, 10 cycles in each of the 3 axis.
1)
Insertion loss fluctuation after test: 0.2dB max.
2)
No visible damage, cracks or part dislocation.
(SM)
(GI)
49
MU SC FC Harsh
Environment Attenuators Terminators
■FC products
Plug Housing
Key width 2.1mm
Cutout keying ring type
For 2 mm cable,
Molded keying ring type
For 3 mm cable,
Molded keying ring type
For 0.9 mm fiber,
Molded keying ring type
Single mode
Multi mode
Solid Body type
Flange type
Single mode
GI
FC to SC
Cutout keying ring type
Cutout keying ring type
Standard type
Round type
FC to SC
Single mode
Ferrule
Adapter
Key width 2.2mm
Conversion adapter
Receptacle
Dust cap
Attenuator
Terminator
HRFC-type
Connector
Fixed type
Variable type
50
MUSCFC
Harsh
Environment
AttenuatorsTerminators
■Molded keying ring type (Key width 2.1mm)
●For 2mm cable
Part Number CL No. Boot color Polishing type
HRFC-P8-H2(21) 701-0075-3-21 Blue PC
HRFC-P8-L2(21) 701-0077-9-21 Light purple AdPC
HRFC-P8-G2(21) 701-2001-8-21 Green APC
●For 3mm cable
Part Number CL No. Boot color Polishing type
HRFC-P8-H3(21) 701-0074-0-21 Blue PC
HRFC-P8-L3(21) 701-0078-1-21 Light purple AdPC
HRFC-P8-G3(21) 701-2002-0-21 Green APC
Part Number CL No. Boot color Polishing type
HRFC-P15-H(21) 701-0114-3-21 Blue PC
HRFC-P15-L(21) 701-0115-6-21 Light purple AdPC
HRFC-P15-G(21) 701-2004-6-21 Green APC
●For 0.9mm fiber
Ø10
M8∞0.75
52.8
Ø10
M8∞0.75
52.8
Ø10
M8∞0.75
30.8
704-0287-0HSC-T3
HRFC-P8-H2,L2,G2,
HRFC-P8-H3,L3,G3,
■Tool
●Crimp tool
Part Number CL No. Applicable connector
<Locations>
(1)2mm Jacket crimping: section A
3mm Jacket crimping: section C
(2)KevlarTM crimping: section B
51
MU SC FC Harsh
Environment Attenuators Terminators
■Cutout keying ring type (Key width 2.1mm)
●For 3mm cable
●For 2mm cable
●For 0.9mm fiber
Part Number CLNo.
HRFC-P1-H 701-0001-7
Part Number CL No.
HRFC-P1-H(04) 701-0001-7-04
Part Number CL No.
HRFC-P6-H 701-0041-1
Ø10
M8∞0.75
37.8
Ø10
M8∞0.75
37.8
Ø10
M8∞0.75
27.8
52
MUSCFC
Harsh
Environment
AttenuatorsTerminators
■Adapters (Key width 2.2mm)
●Solid Body type
●Standard Body type
●Flange type
●Round type
Part Number CL No Mark Split sleeve Remarks
HRFC-PA1-G1(02) 701-0014-9-02 FC-AP
Copper alloy
HRFC-PA1-D1(02) 701-0089-8-02 FC-AAZirconia (Note)
Part Number CL No. Split sleeve Remarks
HRFC-PA4-G1 701-0068-8 Copper alloy
HRFC-PA4-D1 701-0112-8 Zirconia (Note)
Part Number CL No. Split sleeve Remarks
HRFC-A2-SF(01) 701-0039-0-01 Copper alloy
HRFC-A2-SF-D1 ----- Zirconia (Note)
Part Number CL No. Split sleeve Remarks
HRFC-PA11-G1 701-0071-2 Copper alloy
HRFC-PA11-D1 701-0106-5 Zirconia (Note)
Ø9+0.5
0
13.4±0.1
2--M2∞0.4
or 2--Ø2.4 +0.2
0
FC-A
9.5
15
Ø2.2
4
15
2--M8∞0.75
Ø4 Countersink depth 1.5
Ø9+0.5
0
13.4±0.1
2--M2∞0.4
or 2--Ø2.4 +0.2
0
Ø19
13.45
2- Ø2.2
2
15
2--M8∞0.75
2--Ø4 Countersink depth 1.5
Ø8
15
2−M8×0.75
BPanel Cutout
BPanel Cutout
BPanel Cutout
FC-A
4
15 9.5
15
9.5
15
Ø2.2
M8∞0.75
M8∞0.75
Ø4 Countersink depth 1.5
Note:Please take utmost care when inserting FC plug into a FC adapter. When applying excessive force to
the FC plug or inserting in an odd angle, the zirconia sleeve within the adapter might be dameged.
Note:Please take utmost care when inserting FC plug into a FC adapter. When applying excessive force to
the FC plug or inserting in an odd angle, the zirconia sleeve within the adapter might be dameged.
Note:Please take utmost care when inserting FC plug into a FC adapter. When applying excessive force to
the FC plug or inserting in an odd angle, the zirconia sleeve within the adapter might be dameged.
Note:Please take utmost care when inserting FC plug into a FC adapter. When applying excessive force to
the FC plug or inserting in an odd angle, the zirconia sleeve within the adapter might be dameged.
Ø9+0.5
0
13.4±0.1 Board thiekness : 16mm
Board thiekness : 16mm
+0.2
0
2-M2∞0.4
or 2-Ø2.4
53
MU SC FC Harsh
Environment Attenuators Terminators
■Conversion adapters
●FC / SC
●FC / SC
■Receptacle
Part Number CL No. Split sleeve
HSCJ-HRFCJ-B(51) 704-0021-3-51 Copper alloy
Part Number HRS No. Remarks
HRFC-R1 701-0016-4 MM
HRFC-R2 701-0023-0 SM
BPanel Cutout
15
2--M8∞0.75
Ø9+0.5
0
13.4±0.1
2--M2∞0.4
13.4
9
12.8
Ø19
21.2
5.5 12.23.5
or 2--Ø2.4 +0.2
0
FC-A
M8∞0.75
5.5 M9.5
M15
4-Ø2.2
3
9
Ø4 Countersink depth 1.5
BPanel Cutout
●FC / SC
M8∞0.75
27.9
21
( 1.8 )
9
12.8
7.4
9.4
CL No.Part Number
Polishing type
Fiber type
704-0203-0-51
HSCP-HRFCJ-1(51)
PC GI-50/125
704-0288-3-51
HSCP-HRFCJ-1AS(51)
AdPC
704-0204-3-51
HSCP-HRFCJ-2(51)
PC SM-9.5/125
704-0289-6-51
HSCP-HRFCJ-2AS(51)
AdPC
Split sleeve
Copper alloy
CL No.Part Number
Polishing type
Fiber type
701-0065-0-51HRFCP-HSCJ-1(51) PC GI-50/125
701-0108-0-51
HRFCP-HSCJ-1AS(51)
AdPC
701-0085-7-51HRFCP-HSCJ-2(51) PC
SM-9.5/125
701-0109-3-51
HRFCP-HSCJ-2AS(51)
AdPC
Split sleeve
Copper alloy
9.15
7.4
13.7
15
32
(3.9) 12.8
9
Ø19
Board thiekness : 16mm
54
MUSCFC
Harsh
Environment
AttenuatorsTerminators
Part Number CL No.
HRFC-C1 701-0019-2
■Ferrule
■Dust Cap
Same as SC ferrules
Refer to page 33 for details.