BUZ71 Data Sheet June 1999 14A, 50V, 0.100 Ohm, N-Channel Power MOSFET Features This is an N-Channel enhancement mode silicon gate power field effect transistor designed for applications such as switching regulators, switching converters, motor drivers, relay drivers, and drivers for high power bipolar switching transistors requiring high speed and low gate drive power. This type can be operated directly from integrated circuits. * rDS(ON) = 0.100 File Number 2418.2 * 14A, 50V * SOA is Power Dissipation Limited * Nanosecond Switching Speeds * Linear Transfer Characteristics * High Input Impedance Formerly developmental type TA9770. * Majority Carrier Device Ordering Information PART NUMBER BUZ71 PACKAGE TO-220AB * Related Literature - TB334 "Guidelines for Soldering Surface Mount Components to PC Boards" BRAND BUZ71 NOTE: When ordering, use the entire part number. Symbol D G S Packaging JEDEC TO-220AB DRAIN (FLANGE) 11 SOURCE DRAIN GATE CAUTION: These devices are sensitive to electrostatic discharge; follow proper ESD Handling Procedures. http://www.intersil.com or 407-727-9207 | Copyright (c) Intersil Corporation 1999 BUZ71 TC = 25oC, Unless Otherwise Specified Absolute Maximum Ratings Drain to Source Breakdown Voltage (Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VDS Drain to Gate Voltage (RGS = 20k) (Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .VDGR Continuous Drain Current, TC = 55oC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ID Pulsed Drain Current (Note 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IDM Gate to Source Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VGS Maximum Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PD Linear Derating Factor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Single Pulse Avalanche Energy Rating (Note 4) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EAS Operating and Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TJ, TSTG DIN Humidity Category - DIN 40040 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IEC Climatic Category - DIN IEC 68-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Maximum Temperature for Soldering Leads at 0.063in (1.6mm) from Case for 10s. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TL Package Body for 10s, See Techbrief 334 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Tpkg BUZ71 50 50 14 56 20 40 0.32 100 -55 to 150 E 55/150/56 UNITS V V A A V W W/oC mJ oC 300 260 oC oC CAUTION: Stresses above those listed in "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. NOTE: 1. TJ = 25oC to 125oC. Electrical Specifications TC = 25oC, Unless Otherwise Specified PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNITS Drain to Source Breakdown Voltage BVDSS ID = 250A, VGS = 0V 50 - - V Gate to Threshold Voltage VGS(TH) VGS = VDS, ID = 1mA (Figure 9) 2.1 3 4 V - 20 250 A - 100 1000 A Zero Gate Voltage Drain Current Gate to Source Leakage Current Drain to Source On Resistance (Note 2) IDSS IGSS VGS = 20V, VDS = 0V - 10 100 nA rDS(ON) ID = 9A, VGS = 10V (Figure 8) - 0.09 0.1 gfs VDS = 25V, ID = 9A (Figure 11) 3.0 5.2 - S - 20 30 ns Forward Transconductance (Note 2) Turn-On Delay Time td(ON) Rise Time tr Turn-Off Delay Time TJ = 25oC, VDS = 50V, VGS = 0V TJ = 125oC, VDS = 50V, VGS = 0V VCC = 30V, ID 3A, VGS = 10V, RGS = 50, RL = 10 - 55 85 ns td(OFF) - 70 90 ns tf - 80 110 ns - 480 650 pF - 280 450 pF - 160 280 Fall Time Input Capacitance CISS Output Capacitance COSS Reverse Transfer Capacitance CRSS VDS = 25V, VGS = 0V, f = 1MHz (Figure 10) pF Thermal Resistance Junction to Case RJC 3.1 oC/W Thermal Resistance Junction to Ambient RJA 75 oC/W Source to Drain Diode Specifications PARAMETER SYMBOL Continuous Source to Drain Current ISD Pulsed Source to Drain Current ISDM Source to Drain Diode Voltage VSD Reverse Recovery Time trr Reverse Recovery Charge QRR MIN TYP MAX UNITS TC = 25oC TEST CONDITIONS - - 14 A TC = 25oC TJ = 25oC, ISD = 28A, VGS = 0V, (Figure 12) TJ = 25oC, ISD = 14A, dISD/dt = 100A/s, VR = 30V - - 56 A - 1.6 1.8 V - 120 - ns - 0.15 - C NOTES: 2. Pulse Test: Pulse width 300s, duty cycle 2%. 3. Repetitive rating: pulse width limited by maximum junction temperature. See Transient Thermal Impedance curve (Figure 3). 4. VDD = 10V, starting TJ = 25oC, L = 820H, IPEAK = 14A. (See Figures 14 and 15). 12 BUZ71 Typical Performance Curves Unless Otherwise Specified 18 1.2 VGS 10V POWER DISSIPATION MULTIPLIER 16 1.0 14 ID, DRAIN CURRENT (A) 0.8 0.6 0.4 12 10 8 6 4 0.2 2 0 0 25 50 75 100 TC , CASE TEMPERATURE (oC) 125 FIGURE 1. NORMALIZED POWER DISSIPATION vs CASE TEMPERATURE ZJC, TRANSIENT THERMAL IMPEDANCE 0 150 0 50 100 TC, CASE TEMPERATURE (oC) 150 FIGURE 2. MAXIMUM CONTINUOUS DRAIN CURRENT vs CASE TEMPERATURE 0.5 1 0.2 0.1 0.1 0.05 0.02 0.01 0 PDM t1 t2 NOTES: DUTY FACTOR: D = t1/t2 PEAK TJ = PDM x ZJC + TC 0.01 10-5 10-4 10-3 10-2 10-1 t, RECTANGULAR PULSE DURATION (s) 100 101 FIGURE 3. MAXIMUM TRANSIENT THERMAL IMPEDANCE 102 ID, DRAIN CURRENT (A) 101 TJ = MAX RATED SINGLE PULSE TC = 25oC 100s 1ms OPERATION IN THIS 10ms 100ms DC AREA MAY BE LIMITED 100 BY r DS(ON) ID, DRAIN CURRENT (A) 30 5s 10s PD = 40W VGS = 20V 10V PULSE DURATION = 80s DUTY CYCLE = 0.5% MAX VGS = 8.0V 20 VGS = 7.5V VGS = 7.0V VGS = 6.5V VGS = 6.0V 10 VGS = 5.5V VGS = 5.0V 10-1 100 101 102 VDS, DRAIN TO SOURCE VOLTAGE (V) FIGURE 4. FORWARD BIAS SAFE OPERATING AREA 13 103 0 VGS = 4.5V VGS = 4.0V 0 1 3 4 5 2 VDS, DRAIN TO SOURCE VOLTAGE (V) FIGURE 5. OUTPUT CHARACTERISTICS 6 BUZ71 15 Unless Otherwise Specified (Continued) 0.4 PULSE DURATION = 80s DUTY CYCLE = 0.5% MAX VDS = 25V TJ = 25oC rDS(ON), DRAIN TO SOURCE ON RESISTANCE () IDS(ON), DRAIN TO SOURCE CURRENT (A) Typical Performance Curves 10 5 0 5 VGS, GATE TO SOURCE VOLTAGE (V) 0.20 0.10 0 40 4 VGS(TH), GATE THRESHOLD VOLTAGE (V) ON RESISTANCE () rDS(ON), DRAIN TO SOURCE VGS = 10V, ID = 9A PULSE DURATION = 80s DUTY CYCLE = 0.5% MAX -40 80 120 2 1 0 -50 gfs, TRANSCONDUCTANCE (S) C, CAPACITANCE (nF) 6 CISS COSS CRSS 10 20 30 VDS, DRAIN TO SOURCE VOLTAGE (V) 40 FIGURE 10. CAPACITANCE vs DRAIN TO SOURCE VOLTAGE 14 30 0 50 100 150 FIGURE 9. GATE THRESHOLD VOLTAGE vs JUNCTION TEMPERATURE VGS = 0, f = 1MHz CISS = CGS + CGD CRSS = CGD COSS CDS +CGS 0 10 20 ID, DRAIN CURRENT (A) TJ, JUNCTION TEMPERATURE (oC) 100 10-2 0 3 160 FIGURE 8. DRAIN TO SOURCE ON RESISTANCE vs JUNCTION TEMPERATURE 10-1 20V VDS = VGS ID = 1mA TJ , JUNCTION TEMPERATURE (oC) 101 10V 0.1 FIGURE 7. DRAIN TO SOURCE ON RESISTANCE vs GATE VOLTAGE AND DRAIN CURRENT 0.30 0 9V 0.2 10 FIGURE 6. TRANSFER CHARACTERISTICS VGS = 5V 5.5V 6V 6.5V 7V 7.5V 8V 0.3 0 0 PULSE DURATION = 80s DUTY CYCLE = 0.5% MAX PULSE DURATION = 80s DUTY CYCLE = 0.5% MAX VDS = 25V TJ = 25oC 5 4 3 2 1 0 0 5 10 ID, DRAIN CURRENT (A) FIGURE 11. TRANSCONDUCTANCE vs DRAIN CURRENT 15 BUZ71 Typical Performance Curves 15 PULSE DURATION = 80s DUTY CYCLE = 0.5% MAX 101 TJ = 150oC TJ = 25oC 100 10-1 0 ID = 18A VGS, GATE TO SOURCE VOLTAGE (V) ISD, SOURCE TO DRAIN CURRENT (A) 102 Unless Otherwise Specified (Continued) 0.5 1.0 1.5 2.0 2.5 VSD, SOURCE TO DRAIN VOLTAGE (V) VDS = 10V 10 VDS = 40V 5 0 3.0 0 20 10 30 Qg, GATE CHARGE (nC) FIGURE 12. SOURCE TO DRAIN DIODE VOLTAGE FIGURE 13. GATE TO SOURCE VOLTAGE vs GATE CHARGE Test Circuits and Waveforms VDS BVDSS tP L VDS IAS VARY tP TO OBTAIN REQUIRED PEAK IAS VDD + RG VDD - VGS DUT tP 0V 0 IAS 0.01 tAV FIGURE 14. UNCLAMPED ENERGY TEST CIRCUIT FIGURE 15. UNCLAMPED ENERGY WAVEFORMS tON tOFF td(ON) td(OFF) tf tr RL VDS 90% 90% + RG - VDD 10% 10% 0 DUT 90% VGS VGS 0 FIGURE 16. SWITCHING TIME TEST CIRCUIT 15 10% 50% 50% PULSE WIDTH FIGURE 17. RESISTIVE SWITCHING WAVEFORMS BUZ71 Test Circuits and Waveforms (Continued) VDS (ISOLATED SUPPLY) CURRENT REGULATOR 12V BATTERY 0.2F VDD Qg(TOT) SAME TYPE AS DUT 50k Qgd Qgs 0.3F D Ig(REF) VDS DUT G 0 S 0 IG CURRENT SAMPLING RESISTOR VGS VDS ID CURRENT SAMPLING RESISTOR FIGURE 18. GATE CHARGE TEST CIRCUIT Ig(REF) 0 FIGURE 19. GATE CHARGE WAVEFORMS All Intersil semiconductor products are manufactured, assembled and tested under ISO9000 quality systems certification. Intersil semiconductor products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design and/or specifications at any time without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries. For information regarding Intersil Corporation and its products, see web site http://www.intersil.com Sales Office Headquarters NORTH AMERICA Intersil Corporation P. O. Box 883, Mail Stop 53-204 Melbourne, FL 32902 TEL: (407) 724-7000 FAX: (407) 724-7240 16 EUROPE Intersil SA Mercure Center 100, Rue de la Fusee 1130 Brussels, Belgium TEL: (32) 2.724.2111 FAX: (32) 2.724.22.05 ASIA Intersil (Taiwan) Ltd. 7F-6, No. 101 Fu Hsing North Road Taipei, Taiwan Republic of China TEL: (886) 2 2716 9310 FAX: (886) 2 2715 3029