Film Capacitors Metallized Polypropylene Film Capacitors (MKP) Series/Type: Date: B32612 ... B32614 August 2004 (c) EPCOS AG 2004. Reproduction, publication and dissemination of this data sheet, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical and Electronics Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers' Association), unless otherwise agreed. Metallized polypropylene film capacitors (MKP) Pulse application (wound) Typical applications TV (S-correction, flyback) Electronic ballasts Climatic Max. operating temperature: 110 C Climatic category (IEC 60068-1): 55/100/56 Construction Dielectric: polypropylene (PP) Wound capacitor technology Epoxy resin coating (UL 94 V-0) Features Very high pulse strength Terminals Crimped wire leads, lead-free tinned, lead length (6 1 mm) or min. 20 mm Double crimped wire leads, lead-free tinned Straight wire leads, lead-free tinned, lead length (17 3) mm Different lead spacings (reduced and enlarged) available, lead length (6 1 mm) Marking Manufacturer's logo, style and type (P61x), rated capacitance (coded), capacitance tolerance (code letter), rated DC voltage, date of manufacture (code) Delivery mode Bulk (untaped) Taped (Ammo pack or reel) For notes on taping, refer to chapter "Taping and packing". 2 B32612 ... B32614 B32612 ... B32614 Pulse application (wound) Dimensional drawings Detail of double crimped version Dimensions in mm Lead spacing 0.8 Lead diameter Type d1 15.0 22.5 27.5 0.8 0.8 0.8 B32612 B32613 B32614 3 B32612 ... B32614 Pulse application (wound) Overview of available types Lead spacing 15.0 mm 22.5 mm Type B32612 B32613 Page 6 8 VR (VDC) 250 400 630 1000 1250 1600 1600 2000 250 400 630 1000 1600 2000 2000 Vrms (VAC) 160 200 250 250 500 500 700 700 160 200 250 250 500 700 1000 CR (nF) 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 150 220 330 470 680 1000 Lead configurations Serie Standard Reduced Enlarged Straight Double crimped B32612 B32613 B32614 15 mm 22.5 mm 27.5 mm 7.5 / 10 / 12.5 mm 15 / 17.5 / 20 mm 25 mm 17.5 mm 25 mm 15 mm 22.5 mm 27.5 mm 15 mm 22.5 mm 27.5 mm 4 B32612 ... B32614 Pulse application (wound) Overview of available types Lead spacing 27.5 mm Type B32614 Page 10 VR (VDC) 250 400 630 1000 1600 2000 Vrms (VAC) 160 200 250 250 500 700 CR (nF) 10 15 22 33 47 68 100 150 220 470 680 1000 1500 2200 Lead configurations Serie Standard Reduced Enlarged Straight Double crimped B32612 B32613 B32614 15 mm 22.5 mm 27.5 mm 7.5 / 10 / 12.5 mm 15 / 17.5 / 20 mm 25 mm 17.5 mm 25 mm 15 mm 22.5 mm 27.5 mm 15 mm 22.5 mm 27.5 mm 5 B32612 Pulse application (wound) Ordering codes and packing units (lead spacing 15 mm) VR Vrms CR f 1 kHz VDC VAC nF 250 160 400 200 630 250 1000 250 150 220 330 470 680 68 100 150 220 330 470 68 100 150 220 10 15 22 33 47 68 100 Max. dimensions wxhxl mm 6.5 x 12.5 x 18.0 7.0 x 13.5 x 18.0 8.0 x 14.5 x 18.0 9.5 x 16.0 x 18.0 11.5 x 17.5 x 18.0 6.5 x 12.0 x 18.0 7.0 x 12.5 x 18.0 7.5 x 12.5 x 18.0 8.0 x 14.5 x 18.0 9.5 x 16.0 x 18.0 11.0 x 17.5 x 18.0 6.5 x 12.0 x 18.0 7.5 x 13.0 x 18.0 9.0 x 14.5 x 18.0 10.0 x 16.5 x 18.0 7.0 x 12.5 x 18.0 8.0 x 13.5 x 18.0 9.0 x 15.5 x 18.0 6.5 x 13.0 x 18.0 7.0 x 15.5 x 18.0 8.5 x 16.5 x 18.0 11.0 x 17.5 x 18.0 Ordering code (composition see below) B32612A3154+*** B32612A3224+*** B32612A3334+*** B32612A3474+*** B32612A3684+*** B32612A4683+*** B32612A4104+*** B32612A4154+*** B32612A4224+*** B32612A4334+*** B32612A4474+*** B32612A6683+*** B32612A6104+*** B32612A6154+*** B32612A6224+*** B32612A0103+*** B32612A0153+*** B32612A0223+*** B32612A0333+*** B32612A0473+*** B32612A0683+*** B32612A0104+*** Ammo Reel Untaped pack pcs./unit pcs./unit pcs./unit 850 800 700 600 500 850 800 750 700 600 500 850 750 600 550 800 700 600 850 800 650 500 1100 1000 900 800 650 1100 1000 1000 900 800 650 1100 1000 800 750 1000 900 800 1100 1000 850 650 1000 1000 500 500 500 1000 1000 1000 500 500 500 1000 1000 500 500 1000 1000 1000 1000 1000 500 500 Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: K = 10% J = 5% *** = Packaging code: 289 = Ammo pack 189 = Reel 010 = Untaped crimped (lead length 6 1 mm) 011 = Untaped crimped (lead length min. 20 mm) 008 = Untaped (straight, lead length 173 mm) 020 = Double crimped (lead length 6 1 mm) Packaging codes for further lead configurations (untaped): Lead configuration (lead length 6 1 mm) Reduced Reduced Reduced Enlarged Lead spacing (mm) 7.5 mm 10 mm 12.5 mm 17.5 mm Packaging code 030 040 050 060 6 B32612 Pulse application (wound) Ordering codes and packing units (lead spacing 15 mm) VR Vrms CR f 1 kHz VDC VAC nF 6.8 1250 500 10 15 22 33 4.7 1600 500 6.8 10 15 3.3 1600 700 4.7 6.8 10 1.0 2000 700 1.5 2.2 3.3 4.7 Max. dimensions wxhxl mm 7.0 x 11.0 x 18.0 7.5 x 13.0 x 18.0 8.0 x 14.0 x 18.0 9.5 x 15.5 x 18.0 11.0 x 17.5 x 18.0 6.5 x 12.0 x 18.0 8.0 x 13.0 x 18.0 9.0 x 14.5 x 18.0 10.0 x 17.5 x 18.0 6.5 x 11.5 x 18.0 7.5 x 12.5 x 18.0 8.5 x 14.5 x 18.0 9.5 x 17.0 x 18.0 7.0 x 10.5 x 18.0 7.5 x 11.5 x 18.0 8.0 x 14.5 x 18.0 8.5 x 15.0 x 18.0 9.5 x 18.0 x 18.0 Ordering code (composition see below) B32612A7682+*** B32612A7103+*** B32612A7153+*** B32612A7223+*** B32612A7333+*** B32612A1472+*** B32612A1682+*** B32612A1103+*** B32612A1153+*** B32612J1332+*** B32612J1472+*** B32612J1682+*** B32612J1103+*** B32612A2102+*** B32612A2152+*** B32612A2222+*** B32612A2332+*** B32612A2472+*** Ammo pack pcs./unit 800 750 700 600 500 850 700 600 550 850 750 650 600 800 750 700 650 600 Reel Untaped pcs./unit 1000 1000 900 800 650 1100 900 800 750 1100 1000 850 800 1000 1000 900 850 800 pcs./unit 1000 1000 500 500 500 1000 500 500 500 1000 1000 500 250 1000 1000 1000 500 500 Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: K = 10% J = 5% *** = Packaging code: 289 = Ammo pack 189 = Reel 010 = Untaped crimped (lead length 6 1 mm) 011 = Untaped crimped (lead length min. 20 mm) 008 = Untaped (straight, lead length 173 mm) 020 = Double crimped (lead length 6 1 mm) Packaging codes for further lead configurations (untaped): Lead configuration (lead length 6 1 mm) Reduced Reduced Reduced Enlarged Lead spacing (mm) 7.5 mm 10 mm 12.5 mm 17.5 mm Packaging code 030 040 050 060 7 B32613 Pulse application (wound) Ordering codes and packing units (lead spacing 22.5 mm) VR Vrms CR f 1 kHz VDC VAC nF 250 160 400 200 630 250 1000 250 1600 500 220 330 470 680 1000 150 220 330 470 680 100 150 220 330 470 33 47 68 100 150 10 15 22 33 Max. dimensions wxhxl mm 7.0 x 14.5 x 26.5 7.0 x 14.5 x 26.5 8.0 x 15.5 x 26.5 9.5 x 16.0 x 26.5 11.0 x 19.0 x 26.5 7.0 x 13.5 x 26.5 7.0 x 14.0 x 26.5 8.0 x 16.0 x 26.5 9.5 x 16.0 x 26.5 11.5 x 17.5 x 26.5 7.0 x 12.5 x 26.5 7.5 x 14.0 x 26.5 9.0 x 15.5 x 26.5 10.0 x 18.0 x 26.5 11.0 x 20.0 x 26.5 8.5 x 14.5 x 26.5 10.0 x 15.5 x 26.5 11.0 x 17.5 x 26.5 10.0 x 16.5 x 26.5 12.0 x 18.0 x 26.5 7.0 x 13.5 x 26.5 8.0 x 14.5 x 26.5 9.0 x 17.0 x 26.5 10.5 x 18.5 x 26.5 Ordering code (composition see below) B32613A3224+*** B32613A3334+*** B32613A3474+*** B32613A3684+*** B32613A3105+*** B32613A4154+*** B32613A4224+*** B32613A4334+*** B32613A4474+*** B32613A4684+*** B32613A6104+*** B32613A6154+*** B32613A6224+*** B32613A6334+*** B32613A6474+*** B32613A0333+*** B32613A0473+*** B32613A0683+*** B32613A0104+*** B32613A0154+*** B32613A1103+*** B32613A1153+*** B32613A1223+*** B32613A1333+*** Ammo Reel Untaped pack pcs./unit pcs./unit pcs./unit 500 500 450 350 300 500 500 450 350 300 500 450 400 350 300 400 350 300 350 300 500 450 400 350 700 700 600 500 450 700 700 600 500 400 700 650 550 500 450 550 500 450 500 400 700 600 550 450 500 500 500 500 250 500 500 500 250 250 250 250 250 250 250 500 250 250 250 250 500 500 250 250 Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: K = 10% J = 5% *** = Packaging code: 289 = Ammo pack 189 = Reel 010 = Untaped crimped (lead length 6 1 mm) 011 = Untaped crimped (lead length min. 20 mm) 008 = Untaped (straight, lead length 173 mm) 020 = Double crimped (lead length 6 1 mm) Packaging codes for further lead configurations (untaped): Lead configuration (lead length 6 1 mm) Reduced Reduced Reduced Enlarged Lead spacing (mm) 15 mm 17.5 mm 20 mm 25 mm Packaging code 055 060 030 080 8 B32613 Pulse application (wound) Ordering codes and packing units (lead spacing 22.5 mm) VR Vrms CR f 1 kHz VDC VAC nF 3.3 2000 700 4.7 6.8 10 15 3.3 2000 1000 4.7 6.8 10 Max. dimensions wxhxl mm 7.0 x 13.0 x 26.5 7.5 x 14.0 x 26.5 8.5 x 16.0 x 26.5 10.5 x 17.0 x 26.5 12.0 x 20.5 x 26.5 8.0 x 14.5 x 26.5 8.5 x 16.5 x 26.5 10.0 x 18.5 x 26.5 11.5 x 21.5 x 26.5 Ordering code (composition see below) B32613A2332+*** B32613A2472+*** B32613A2682+*** B32613A2103+*** B32613A2153+*** B32613A8332+*** B32613A8472+*** B32613A8682+*** B32613A8103+*** Ammo pack pcs./unit 500 450 400 350 300 450 400 350 300 Reel Untaped pcs./unit 700 650 550 450 400 600 550 500 400 pcs./unit 500 500 500 250 250 500 250 250 250 Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: K = 10% J = 5% *** = Packaging code: 289 = Ammo pack 189 = Reel 010 = Untaped crimped (lead length 6 1 mm) 011 = Untaped crimped (lead length min. 20 mm) 008 = Untaped (straight, lead length 173 mm) 020 = Double crimped (lead length 6 1 mm) Packaging codes for further lead configurations (untaped): Lead configuration (lead length 6 1 mm) Reduced Reduced Reduced Enlarged Lead spacing (mm) 15 mm 17.5 mm 20 mm 25 mm Packaging code 055 060 030 080 9 B32614 Pulse application (wound) Ordering codes and packing units (lead spacing 27.5 mm) VR Vrms CR f 1 kHz VDC VAC nF 250 160 400 200 630 250 1000 250 1600 500 2000 700 470 680 1000 1500 2200 470 680 1000 1500 2200 470 680 1000 100 150 220 22 33 47 68 10 15 22 33 47 Max. dimensions wxhxl mm 7.0 x 15.0 x 31.5 8.0 x 16.5 x 31.5 9.5 x 17.5 x 31.5 11.5 x 19.5 x 31.5 14.0 x 22.0 x 31.5 9.5 x 15.0 x 31.5 10.0 x 17.5 x 31.5 11.5 x 19.5 x 31.5 14.0 x 22.0 x 31.5 16.5 x 24.5 x 31.5 10.5 x 18.5 x 31.5 12.0 x 21.5 x 31.5 14.0 x 24.0 x 31.5 11.5 x 17.5 x 31.5 13.0 x 21.0 x 31.5 14.5 x 24.5 x 31.5 9.0 x 14.5 x 31.5 10.5 x 16.0 x 31.5 11.0 x 19.5 x 31.5 13.0 x 21.5 x 31.5 9.0 x 15.5 x 31.5 11.0 x 17.5 x 31.5 13.0 x 19.5 x 31.5 14.5 x 23.0 x 31.5 16.5 x 25.5 x 31.5 Ordering code (composition see below) B32614A3474+*** B32614A3684+*** B32614A3105+*** B32614A3155+*** B32614A3225+*** B32614A4474+*** B32614A4684+*** B32614A4105+*** B32614A4155+*** B32614A4225+*** B32614A6474+*** B32614A6684+*** B32614A6105+*** B32614A0104+*** B32614A0154+*** B32614A0224+*** B32614A1223+*** B32614A1333+*** B32614A1473+*** B32614A1683+*** B32614A2103+*** B32614A2153+*** B32614A2223+*** B32614A2333+*** B32614A2473+*** Untaped pcs./unit 500 500 200 200 200 200 200 200 200 150 200 200 200 500 200 200 500 500 200 200 500 200 200 200 150 Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: K = 10% J = 5% *** = Packaging code: 010 = Untaped crimped (lead length 6 1 mm) 011 = Untaped crimped (lead length min. 20 mm) 008 = Untaped (straight, lead length 173 mm) 020 = Double crimped (lead length 6 1 mm) Packaging codes for further lead configurations (untaped): Lead configuration (lead length 6 1 mm) Reduced Lead spacing (mm) 25 mm Packaging code 090 10 B32612 ... B32614 Pulse application (wound) Technical data Max. operating temperature Top,max +110 C Upper category temperature Tmax +100 C Lower category temperature Tmin 55 C Rated temperature TR +85 C 0.1 F<CR1 F CR >1 F Dissipation factor tan (in 10-3) at CR0.1 F at 20 C 0.5 0.5 1 kHz (upper limit values) 10 kHz 0.8 1.5 100 kHz 5.0 CR 0.33 F CR > 0.33 F Insulation resistance Rins or time constant = CR Rins 100 G 30000 s at 20 C, rel. humidity 65% (minimum as-delivered values) DC test voltage 1.6 VR, 2 s TA (C) DC voltage derating AC voltage derating Category voltage VC (continuous operation with VDC TA 85 VC = VR VC,rms = Vrms or VAC at f 1 kHz) 85<TA100 VC = VR (165TA)/80 VC,rms=Vrms (165TA)/80 TA (C) DC voltage (max. hours) AC voltage (max. hours) Operating voltage V op for short operating periods Vop = 1.25 VC (2000 h) Vop = 1.0 VC,rms (2000 h) (VDC or VAC at f 1 kHz) Vop = 1.25 VC (1000 h) Vop = 1.0 VC,rms (1000 h) Damp heat test 56 days/40 C/93% relative humidity Limit values after damp Capacitance change C/C 3% heat test Dissipation factor change tan 0.5 10-3 (at 1 kHz) 1.0 10-3 (at 10 kHz) Insulation resistance Rins 50% of minimum or time constant = CR Rins as-delivered values Reliability: Failure rate 1 fit ( 1 10-9 /h) at 0.5 VR, 40 C Service life tSL 200 000 h at 1.0 VR, 40 C For conversion to other operating conditions and temperatures, refer to chapter "Quality assurance", page . Failure criteria: Total failure Short circuit or open circuit Failure due to variation Capacitance change C/C > 10% of parameters Dissipation factor tan > 4 upper limit value Insulation resistance Rins < 1500 M (CR0.33 F) or time constant = CR Rins < 500 s (CR>0.33 F) Operating temperature range 11 B32612 ... B32614 Pulse application (wound) Characteristic voltages VDC, VAC, Vpp VDC V 1000 1250 1600 1600 2000 2000 VAC V Vpp V 250 500 500 700 700 1000 700 1250 1400 1600 1600 2000 12 B32612 ... B32614 Pulse application (wound) Pulse handling capability "dV/dt" represents the maximum permissible voltage change per unit of time for non-sinusoidal voltages, expressed in V/s. "k0" represents the maximum permissible pulse characteristic of the waveform applied to the capacitor, expressed in V 2/s. Note: The values of dV/dt and k0 provided below must not be exceeded in order to avoid damaging the capacitor. dV/dt values Lead spacing VR Vrms VDC VAC 15 mm 250 400 630 1000 1250 1600 1600 2000 2000 160 200 250 250 500 500 700 700 1000 22.5 mm 27.5 mm 140 200 270 400 800 1500 1900 2200 80 100 140 350 1000 1400 2000 50 70 100 225 700 900 15 mm 22.5 mm 27.5 mm k0 in V2/s 70 000 160 000 340 000 800 000 2 000 000 4 800 000 6 100 000 8 800 000 40 000 80 000 170 000 675 000 3 200 000 5 600 000 10 000 000 dV/dt in V/s k0 values Lead spacing VR Vrms VDC VAC 250 400 630 1000 1250 1600 1600 2000 2000 160 200 250 250 500 500 700 700 1000 13 25 000 55 000 120 000 450 000 2 200 000 3 600 000 B32612 ... B32614 Pulse application (wound) Impedance Z versus frequency f (typical values) 14 B32612 Pulse application (wound) Permissible AC voltage Vrms versus frequency f (for sinusoidal waveforms, TA 90 C) For T A >90 C, please refer to "General technical information", section 3.2.3. Lead spacing 15 mm 250 VDC/160 VAC 400 VDC/200 VAC 630 VDC/250 VAC 1000 VDC/250 VAC 15 B32612 Pulse application (wound) Permissible AC voltage Vrms versus frequency f (for sinusoidal waveforms, TA 90 C) For T A >90 C, please refer to "General technical information", section 3.2.3. Lead spacing 15 mm 1250 VDC/500 VAC 1600 VDC/500 VAC 1600 VDC/700 VAC 2000 VDC/700 VAC 16 B32613 Pulse application (wound) Permissible AC voltage Vrms versus frequency f (for sinusoidal waveforms, TA 90 C) For T A >90 C, please refer to "General technical information", section 3.2.3. Lead spacing 22.5 mm 250 VDC/160 VAC 400 VDC/200 VAC 630 VDC/250 VAC 1000 VDC/250 VAC 17 B32613 Pulse application (wound) Permissible AC voltage Vrms versus frequency f (for sinusoidal waveforms, TA 90 C) For T A >90 C, please refer to "General technical information", section 3.2.3. Lead spacing 22.5 mm 1600 VDC/500 VAC 2000 VDC/700 VAC 2000 VDC/1000 VAC 18 B32614 Pulse application (wound) Permissible AC voltage Vrms versus frequency f (for sinusoidal waveforms, TA 90 C) For T A >90 C, please refer to "General technical information", section 3.2.3. Lead spacing 27.5 mm 250 VDC/160 VAC 400 VDC/200 VAC 630 VDC/250 VAC 1000 VDC/250 VAC 19 B32614 Pulse application (wound) Permissible AC voltage Vrms versus frequency f (for sinusoidal waveforms, TA 90 C) For T A >90 C, please refer to "General technical information", section 3.2.3. Lead spacing 27.5 mm 1600 VDC/500 VAC 2000 VDC/700 VAC 20 B32612 ... B32614 Pulse application (wound) Flyback application Permissible voltage and current / waveform Permissible current I pp versus frequency f for a duty cycle of 20% (t 0/t = 0.2): Approximation formular for duty cycle higher than 20%: 21 B32612 ... B32614 Pulse application (wound) Flyback application Permissible current Ipp versus rated capacitance CR Frequency = 15.75 kHz Frequency = 31.5 kHz Frequency = 95 kHz 22 B32612 ... B32614 Pulse application (wound) S-correction application Permissible voltage and current / waveform 23 B32612 ... B32614 Pulse application (wound) S-correction application Permissible current Ipp versus rated capacitance CR Frequency = 15.75 kHz Frequency = 31.75 kHz Frequency = 95 kHz 24