R74 NISSEI-ARCOTRONICS Bulk MKP Series Taped Fig. 1 Fig. 2 METALLIZED POLYPROPYLENE FILM CAPACITOR A.C. APPLICATIONS Typical applications: electronic lighting (i.e. car headlamp and ballast), pulse applications with high A.C. voltage and medium current. SERIES CODE: R74 Od 0.05 p 15 0.8 p = 10 0.6 Fig. 1 Fig 2 P2 12.70 19.05 All dimensions are in mm. GENERAL TECHNICAL DATA PART NUMBERING SYSTEM 1 2 3 4 5 6 7 [ ] R7 4 1. 2. 8 3. Series code Capacitance value in pico farads. First 2 digits are significant and 3rd digit indicates number of zeros. Capacitance tolerance 4. 5. A.C. voltage Packaging code J = 5% B = bulk K = 10% A = ammo R = reel 6. Lead spacing (mm) 7. Lead length (mm) - (Applies to bulk packaging only. Omit for standard lead length 4-6mm.) 8. Internal code I = 15 L = 24-27 N = 22.5 T = 3.5-4.0 Dielectric: Plates: polypropylene film aluminum layer deposited by evaporation under vacuum Winding: non-inductive type Leads: tinned wire Protection: plastic case, epoxy resin filled. Box material is solvent resistant and flame retardant according to UL94 V0 Marking: manufacturer's logo, series (R74), dielectric code (MKP), capacitance, tolerance, A.C. voltage, manufacturing date code Climatic category: 55/100/56 IEC 60068-1 Operating temperature range: -55 to +105C Related documents: IEC 60384-16; IEC 60384-17 CECC 31200 R = 27.5 V = 2.7-3.3 Typical application: LAMP CAPACITOR IN ELECTRONIC BALLAST Typical European scheme ~ EMI filter Rectifier bridge Step-up circuit R74 Switching circuit R74 R74 R74 Typical U.S. scheme ~ EMI filter Rectifier bridge Step-up circuit Switching circuit R74 R74 NISSEI-ARCOTRONICS MKP Series METALLIZED POLYPROPYLENE FILM CAPACITOR A.C. APPLICATIONS SERIES CODE: R74 single side metallized polypropylene film single side metallized polypropylene film 2 sections (400Vac) 1 section (250Vac) Rated Cap. Max 250Vac* (1 section) dv/dt Max K0 B H L P (V/s) (V2/s) 0.010F 4.0 9.0 13.0 10.0 300 38 E4 0.012F 4.0 9.0 13.0 10.0 300 38 E4 0.015F 5.0 11.0 13.0 10.0 300 38 E4 0.022F 6.0 12.0 13.0 10.0 300 38 E4 0.027F 6.0 12.0 13.0 10.0 300 38 E4 0.015F 5.0 11.0 18.0 15.0 250 31 E4 0.018F 5.0 11.0 18.0 15.0 250 31 E4 0.022F 5.0 11.0 18.0 15.0 250 31 E4 0.027F 5.0 11.0 18.0 15.0 250 31 E4 0.033F 5.0 11.0 18.0 15.0 250 31 E4 0.039F 6.0 12.0 18.0 15.0 250 31 E4 0.047F 6.0 12.0 18.0 15.0 250 31 E4 0.056F 7.5 13.5 18.0 15.0 250 31 E4 0.068F 7.5 13.5 18.0 15.0 250 31 E4 0.082F 8.5 14.5 18.0 15.0 250 31 E4 8.5 14.5 18.0 15.0 250 31 E4 0.10F 0.12F 10.0 16.0 18.0 15.0 250 31 E4 Tolerance: J ( 5%); K (10%) Packaging code: B (bulk); A (ammo); R (reel) Lead length (mm): L (24-27); T (3.5-4.0); V (2.7-3.3) Omit for standard (4-6) All dimensions are in mm. Rated Cap. Part Number R74103-250-FR74123-250-FR74153-250-FR74223-250-FR74273-250-FR74153-250-IR74183-250-IR74223-250-IR74273-250-IR74333-250-IR74393-250-IR74473-250-IR74563-250-IR74683-250-IR74823-250-IR74104-250-IR74124-250-I- B H L P (V/s) (V2/s) 4.0 9.0 13.0 10.0 1200 240 E4 2200F 4.0 9.0 13.0 10.0 1200 240 E4 2700F 4.0 9.0 13.0 10.0 1200 240 E4 3300F 5.0 11.0 13.0 10.0 1200 240 E4 3900F 5.0 11.0 13.0 10.0 1200 240 E4 4700F 5.0 11.0 13.0 10.0 1200 240 E4 5600F 6.0 12.0 13.0 10.0 1200 240 E4 6800F 6.0 12.0 13.0 10.0 1200 240 E4 8200F 5.0 11.0 18.0 15.0 1000 200 E4 6800F 5.0 11.0 18.0 15.0 1000 200 E4 8200F 0.010F 5.0 11.0 18.0 15.0 1000 200 E4 0.012F 6.0 12.0 18.0 15.0 1000 200 E4 0.015F 6.0 12.0 18.0 15.0 1000 200 E4 0.018F 7.5 13.5 18.0 15.0 1000 200 E4 0.022F 7.5 13.5 18.0 15.0 1000 200 E4 0.027F 8.5 14.5 18.0 15.0 1000 200 E4 0.033F 8.5 14.5 18.0 15.0 1000 200 E4 0.039F 10.0 16.0 18.0 15.0 1000 200 E4 0.047F 10.0 16.0 18.0 15.0 1000 200 E4 0.039F 6.0 15.0 26.5 22.5 500 100 E4 0.047F 7.0 16.0 26.5 22.5 500 100 E4 0.056F 7.0 16.0 26.5 22.5 500 100 E4 0.068F 8.5 17.0 26.5 22.5 500 100 E4 0.082F 10.0 18.5 26.5 22.5 500 100 E4 0.10F 10.0 18.5 26.5 22.5 500 100 E4 Tolerance: J ( 5%); K (10%) Packaging code: B (bulk); A (ammo); R (reel) Lead length (mm): L (24-27); T (3.5-4.0); V (2.7-3.3) Omit for standard (4-6) * Note: Max 400Vac (2 sections) dv/dt Max K0 Part Number R74222-400-FR74272-400-FR74332-400-FR74392-400-FR74472-400-FR74562-400-FR74682-400-FR74822-400-FR74682-400-IR74822-400-IR74103-400-IR74123-400-IR74153-400-IR74183-400-IR74223-400-IR74273-400-IR74333-400-IR74393-400-IR74473-400-IR74393-400-NR74473-400-NR74563-400-NR74683-400-NR74823-400-NR74104-400-N- Not suitable for across-the-line applications. Please refer to Interference Suppression Capacitors. If the working voltage (V) is lower than the rated voltage (VR), the capacitor may work at higher dv/dt. In this case the maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio VR /V. The pulse characteristic K0 depends on the voltage waveform and in any case it cannot exceed the value given in the above table. The dv/dt test is carried out at 2 times the above values. R74 NISSEI-ARCOTRONICS MKP Series METALLIZED POLYPROPYLENE FILM CAPACITOR A.C. APPLICATIONS SERIES CODE: R74 single side metallized polypropylene film 2 section (500Vac) Rated Cap. Max 500Vac (2 sections) dv/dt Max K0 B H L P (V/s) (V2/s) 4.0 9.0 13.0 10.0 2000 520 E4 1000F 4.0 9.0 13.0 10.0 2000 520 E4 1200F 4.0 9.0 13.0 10.0 2000 520 E4 1500F 4.0 9.0 13.0 10.0 2000 520 E4 1800F 5.0 11.0 13.0 10.0 2000 520 E4 2200F 5.0 11.0 13.0 10.0 2000 520 E4 2700F 6.0 12.0 13.0 10.0 2000 520 E4 3300F 6.0 12.0 13.0 10.0 2000 520 E4 3900F 6.0 12.0 13.0 10.0 2000 520 E4 4700F 5.0 11.0 18.0 15.0 1300 340 E4 1500F 5.0 11.0 18.0 15.0 1300 340 E4 1800F 5.0 11.0 18.0 15.0 1300 340 E4 2200F 5.0 11.0 18.0 15.0 1300 340 E4 2700F 5.0 11.0 18.0 15.0 1300 340 E4 3300F 5.0 11.0 18.0 15.0 1300 340 E4 3900F 5.0 11.0 18.0 15.0 1300 340 E4 4700F 5.0 11.0 18.0 15.0 1300 340 E4 5600F 6.0 12.0 18.0 15.0 1300 340 E4 6800F 6.0 12.0 18.0 15.0 1300 340 E4 8200F 0.010F 6.0 12.0 18.0 15.0 1300 340 E4 0.012F 7.5 13.5 18.0 15.0 1300 340 E4 0.015F 7.5 13.5 18.0 15.0 1300 340 E4 0.018F 8.5 14.5 18.0 15.0 1300 340 E4 0.022F 10.0 16.0 18.0 15.0 1300 340 E4 0.027F 10.0 16.0 18.0 15.0 1300 340 E4 0.018F 6.0 15.0 26.5 22.5 700 180 E4 0.022F 6.0 15.0 26.5 22.5 700 180 E4 0.027F 7.0 16.0 26.5 22.5 700 180 E4 0.033F 7.0 16.0 26.5 22.5 700 180 E4 0.039F 8.5 17.0 26.5 22.5 700 180 E4 0.047F 10.0 18.5 26.5 22.5 700 180 E4 0.056F 10.0 18.5 26.5 22.5 700 180 E4 0.068F 11.0 20.0 26.5 22.5 700 180 E4 Tolerance: J ( 5%); K (10%) Packaging code: B (bulk); A (ammo); R (reel) Lead length (mm): L (24-27); T (3.5-4.0); V (2.7-3.3) Omit for standard (4-6) Part Number R74102-500-FR74122-500-FR74152-500-FR74182-500-FR74222-500-FR74272-500-FR74332-500-FR74392-500-FR745472-500-FR74152-500-IR74182-500-IR74222-500-IR74272-500-IR74332-500-IR74392-500-IR74472-500-IR74562-500-IR74682-500-IR74822-500-IR74103-500-IR74123-500-IR74153-500-IR74183-500-IR74223-500-IR74273-500-IR74183-500-N-R74223-500-NR74273-500-NR74333-500-NR74393-500-NR74473-500-NR74563-500-NR74683-500-N- Rated Cap. Max 500Vac (2 sections) dv/dt Max K0 B H L P (V/s) (V2/s) 0.082F 11.0 20.0 32.0 27.5 500 130 E4 0.10F 11.0 20.0 32.0 27.5 500 130 E4 9.0 17.0 32.0 27.5 500 130 E4 0.15F 9.0 17.0 32.0 27.5 500 130 E4 0.18F 9.0 17.0 32.0 27.5 500 130 E4 0.22F 0.27F 10.0 20.0 32.0 27.5 500 130 E4 0.33F 10.0 20.0 32.0 27.5 500 130 E4 0.39F 10.0 20.0 32.0 27.5 500 130 E4 0.47F 11.0 20.0 32.0 27.5 500 130 E4 0.56F 13.0 22.0 32.0 27.5 500 130 E4 0.68F 13.0 22.0 32.0 27.5 500 130 E4 0.82F 14.0 28.0 32.0 27.5 500 130 E4 14.0 28.0 32.0 27.5 500 130 E4 1.0F 14.0 28.0 32.0 27.5 500 130 E4 1.2F 18.0 33.0 32.0 27.5 500 130 E4 1.5F 22.0 37.0 32.0 27.5 500 130 E4 1.8F 22.0 37.0 32.0 27.5 500 130 E4 2.2F 0.47F 11.0 22.0 41.5 37.5 300 78 E4 0.56F 11.0 22.0 41.5 37.5 300 78 E4 0.68F 11.0 22.0 41.5 37.5 300 78 E4 0.82F 13.0 24.0 41.5 37.5 300 78 E4 13.0 24.0 41.5 37.5 300 78 E4 1.0F 16.0 28.5 41.5 37.5 300 78 E4 1.2F 16.0 28.5 41.5 37.5 300 78 E4 1.5F 19.0 32.0 41.5 37.5 300 78 E4 2.2F 20.0 40.0 41.5 37.5 300 78 E4 2.7F 20.0 40.0 41.5 37.5 300 78 E4 3.3F Tolerance: J ( 5%); K (10%) Packaging code: B (bulk); A (ammo); R (reel) Lead length (mm): L (24-27); T (3.5-4.0); V (2.7-3.3) Omit for standard (4-6) Part Number R74823-500-RR74104-500-RR74154-500-RR74184-500-RR74224-500-RR74274-500-RR74334-500-RR74394-500-RR74474-500-RR74564-500-RR74684-500-RR74824-500-RR74105-500-RR74125-500-RR74155-500-RR74185-500-RR74225-500-RR74474-500-WR74564-500-WR74684-500-WR74824-500-WR74105-500-WR74125-500-WR74155-500-WR74225-500-WR74275-500-WR74335-500-W- All dimensions are in mm. Note: If the working voltage (V) is lower than the rated voltage (VR), the capacitor may work at higher dv/dt. In this case the maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio VR /V. The pulse characteristic K0 depends on the voltage waveform and in any case it cannot exceed the value given in the above table. The dv/dt test is carried out at 2 times the above values. R74 NISSEI-ARCOTRONICS MKP Series METALLIZED POLYPROPYLENE FILM CAPACITOR A.C. APPLICATIONS SERIES CODE: R74 single side metallized polypropylene film single side metallized polypropylene film 3 sections (700Vac) Rated Cap. 700Vac (3 sections) Max dv/dt (V/s) 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 1300 1300 1300 1300 1300 1300 1300 1300 1300 1300 700 700 700 700 700 700 700 700 700 700 700 700 700 400 400 400 400 400 400 400 Max K0 2 B H L P (V /s) 5.0 11.0 18.0 15.0 960 E4 1000F 5.0 11.0 18.0 15.0 960 E4 1200F 5.0 11.0 18.0 15.0 960 E4 1500F 5.0 11.0 18.0 15.0 960 E4 1800F 5.0 11.0 18.0 15.0 960 E4 2200F 5.0 11.0 18.0 15.0 960 E4 2700F 5.0 11.0 18.0 15.0 960 E4 3300F 6.0 12.0 18.0 15.0 960 E4 3900F 6.0 12.0 18.0 15.0 960 E4 4700F 6.0 12.0 18.0 15.0 960 E4 5600F 7.5 13.5 18.0 15.0 960 E4 6800F 7.5 13.5 18.0 15.0 960 E4 8200F 8.5 14.5 18.0 15.0 960 E4 0.010F 10.0 16.0 18.0 15.0 960 E4 0.012F 10.0 16.0 18.0 15.0 960 E4 0.015F 6.0 15.0 26.5 22.5 420 E4 8200F 6.0 15.0 26.5 22.5 420 E4 0.010F 6.0 15.0 26.5 22.5 420 E4 0.012F 6.0 15.0 26.5 22.5 420 E4 0.015F 7.0 16.0 26.5 22.5 420 E4 0.018F 8.5 17.0 26.5 22.5 420 E4 0.022F 8.5 17.0 26.5 22.5 420 E4 0.027F 10.0 18.5 26.5 22.5 420 E4 0.033F 10.0 18.5 26.5 22.5 420 E4 0.039F 11.0 20.0 26.5 22.5 420 E4 0.047F 9.0 17.0 32.0 27.5 226 E4 0.068F 9.0 17.0 32.0 27.5 226 E4 0.082F 10.0 20.0 32.0 27.5 226 E4 0.10F 10.0 20.0 32.0 27.5 226 E4 0.12F 10.0 20.0 32.0 27.5 226 E4 0.15F 11.0 20.0 32.0 27.5 226 E4 0.18F 13.0 22.0 32.0 27.5 226 E4 0.22F 14.0 28.0 32.0 27.5 226 E4 0.27F 14.0 28.0 32.0 27.5 226 E4 0.33F 18.0 33.0 32.0 27.5 226 E4 0.39F 18.0 33.0 32.0 27.5 226 E4 0.47F 22.0 37.0 32.0 27.5 226 E4 0.56F 22.0 37.0 32.0 27.5 226 E4 0.68F 11.0 22.0 41.5 37.5 130 E4 0.33F 13.0 24.0 41.5 37.5 130 E4 0.39F 16.0 28.5 41.5 37.5 130 E4 0.47F 16.0 28.5 41.5 37.5 130 E4 0.56F 16.0 28.5 41.5 37.5 130 E4 0.68F 19.0 32.0 41.5 37.5 130 E4 0.82F 19.0 32.0 41.5 37.5 130 E4 1.0F Tolerance: J ( 5%); K (10%) Packaging code: B (bulk); A (ammo); R (reel) Lead length (mm): L (24-27); T (3.5-4.0); V (2.7-3.3) Omit for standard (4-6) All dimensions are in mm. 4 sections (900Vac) Part Number R74102-700-IR74122-700-IR74152-700-IR74182-700-IR74222-700-IR74272-700-IR74332-700-IR74392-700-IR74472-700-IR74562-700-IR74682-700-IR74822-700-IR74103-700-IR74123-700-IR74153-700-IR74822-700-NR74103-700-NR74123-700-NR74153-700-NR74183-700-NR74223-700-NR74273-700-NR74333-700-NR74393-700-NR74473-700-NR74683-700-RR74823-700-RR74104-700-RR74124-700-RR74154-700-RR74184-700-RR74224-700-RR74274-700-RR74334-700-RR74394-700-RR74474-700-RR74564-700-RR74684-700-RR74334-700-WR74394-700-WR74474-700-WR74564-700-WR74684-700-WR74824-700-WR74105-700-W- Rated Cap. 900Vac (4 sections) Max dv/dt (V/s) 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 900 900 900 900 900 900 900 900 900 Max K0 2 B H L P (V /s) 6.0 15.0 26.5 22.5 1000 E4 1000F 6.0 15.0 26.5 22.5 1000 E4 1200F 6.0 15.0 26.5 22.5 1000 E4 1500F 6.0 15.0 26.5 22.5 1000 E4 1800F 6.0 15.0 26.5 22.5 1000 E4 2200F 6.0 15.0 26.5 22.5 1000 E4 2700F 6.0 15.0 26.5 22.5 1000 E4 3300F 6.0 15.0 26.5 22.5 1000 E4 3900F 6.0 15.0 26.5 22.5 1000 E4 4700F 6.0 15.0 26.5 22.5 1000 E4 5600F 6.0 15.0 26.5 22.5 1000 E4 6800F 7.0 16.0 26.5 22.5 1000 E4 8200F 1000 E4 0.010F 7.0 16.0 26.5 22.5 1000 E4 0.012F 8.5 17.0 26.5 22.5 1000 E4 0.015F 10.0 18.5 26.5 22.5 1000 E4 0.018F 10.0 18.5 26.5 22.5 1000 E4 0.022F 11.0 20.0 26.5 22.5 600 E4 0.027F 9.0 17.0 32.0 27.5 600 E4 0.033F 9.0 17.0 32.0 27.5 600 E4 0.039F 9.0 17.0 32.0 27.5 600 E4 0.047F 9.0 17.0 32.0 27.5 600 E4 0.056F 9.0 17.0 32.0 27.5 600 E4 0.068F 9.0 17.0 32.0 27.5 600 E4 0.082F 10.0 20.0 32.0 27.5 600 E4 0.10F 10.0 20.0 32.0 27.5 600 E4 0.12F 11.0 20.0 32.0 27.5 600 E4 0.15F 13.0 22.0 32.0 27.5 600 E4 0.18F 14.0 28.0 32.0 27.5 600 E4 0.22F 14.0 28.0 32.0 27.5 600 E4 0.27F 18.0 33.0 32.0 27.5 600 E4 0.33F 18.0 33.0 32.0 27.5 600 E4 0.39F 22.0 37.0 32.0 27.5 600 E4 0.47F 22.0 37.0 32.0 27.5 600 E4 0.56F 22.0 37.0 32.0 27.5 360 E4 0.22F 11.0 22.0 41.5 37.5 360 E4 0.27F 13.0 24.0 41.5 37.5 360 E4 0.33F 16.0 28.5 41.5 37.5 360 E4 0.39F 16.0 28.5 41.5 37.5 360 E4 0.47F 16.0 28.5 41.5 37.5 360 E4 0.56F 19.0 32.0 41.5 37.5 360 E4 0.68F 19.0 32.0 41.5 37.5 360 E4 0.82F 20.0 40.0 41.5 37.5 24.0 44.0 41.5 37.5 360 E4 1.0F Tolerance: J ( 5%); K (10%) Packaging code: B (bulk); A (ammo); R (reel) Lead length (mm): L (24-27); T (3.5-4.0); V (2.7-3.3) Omit for standard (4-6) Part Number R74102-900-NR74122-900-NR74152-900-NR74182-900NR74222-900-NR74272-900-NR74332-900-NR74392-900-NR74472-900-NR74562-900-NR74682-900-NR74822-900-NR74103-900-NR74123-900-NR74153-900-NR74183-900-NR74223-900-NR74273-900-RR74333-900-RR74393-900-RR74473-900-RR74563-900-RR74683-900-RR74823-900-RR74104-900-RR74124-900-RR74154-900-RR74184-900-RR74224-900-RR74274-900-RR74334-900-RR74394-900-RR74474-900-RR74564-900-RR74224-900-WR74274-900-WR74334-900-WR74394-900-WR74474-900-WR74564-900-WR74684-900-WR74824-900-WR74105-900-W- Note: If the working voltage (V) is lower than the rated voltage (VR), the capacitor may work at higher dv/dt. In this case the maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio VR /V. The pulse characteristic K0 depends on the voltage waveform and in any case it cannot exceed the value given in the b t bl Th d /dt t t i i d t t 2 ti th b l R74 NISSEI-ARCOTRONICS MKP Series METALLIZED POLYPROPYLENE FILM CAPACITOR A.C. APPLICATIONS SERIES CODE: R74 ELECTRICAL CHARACTERISTICS Rated voltage (VR): TEST METHOD AND PERFORMANCE 250Vac ( 630Vdc) -400Vac (1000Vdc) 500Vac (1300Vdc) -700Vac (1600Vdc) 900Vac (2000Vdc) Rated temperature (TR): +85C Voltage derating vs. temperature: for temperatures between +85C and +105C a decreasing factor of 1.25% per C on the rated voltage VR has to be applied. Capacitance range: 1000F to 0.12F Capacitance tolerances (measured at 1 kHz): 5% (J); 10% (K) 15 10 22.5 18 -4 DF change (tg): 10x10 at 1kHz Insulation resistance: 50% of initial limit Voltage applied: Performance +85C 2C 2000 h 1.25xVR (a.c.) at 50Hz Capacitance change (C/C): 5% Total self-inductance (L): (lead length ~2mm) 10 9 +40C 2C 93% 2% 56 days Capacitance change (C/C): 2% Endurance: Test conditions Temperature: Test duration: Capacitance values: E 12 series (IEC 60063 Norm) Pitch (mm) L (nH) Damp heat, steady state: Test conditions Temperature: Relative humidity (RH): Test duration: Performance 27.5 18 DF change (tg): -4 15x10 at 10kHz Insulation resistance: 50% of initial limit Dissipation factor (DF): -4 tgx10 at +25C 5C kHz 10 100 Resistance to soldering heat: Test conditions Solder bath temperature: +260C 5C Dipping time (with heat screen): 10 s 1 s Performance C 0.1F 6 20 Insulation resistance: Test conditions Temperature: Voltage charge time: Voltage charge: Performance 1 x 105 M Capacitance change (C/C): 1% +25C 5C 1 min 100Vdc 5 (Typ. value: 5 x 10 M)* Test voltage between terminations: 1.6xVR applied for 2 s at +25C 5C DF change (tg): 4 10x10- at 10kHz Insulation resistance: initial limit Long term stability (after two years): Storage: standard environmental conditions (see general information) Performance Capacitance change (C/C): 0.5% R74 NISSEI-ARCOTRONICS MKP Series METALLIZED POLYPROPYLENE FILM CAPACITOR A.C. APPLICATIONS SERIES CODE: R74 MAX. VOLTAGE (Vrms) VERSUS FREQUENCY (sinusoidal waveform / Th 40C) Vrms [V] 1000 250 Vac Vrms [V] 1000 100 400 Vac 100 0.015F - p = 15 0.033F - p = 15 0.068F - p = 15 0.01F - p = 15 0.022F - p = 15 0.1F - p = 26.5 10 10 1 10 100 Vrms [V] 1000 1000 f [kHz] 1 10 Vrms [V] 1000 500 Vac 100 100 1000 f [kHz] 100 1000 f [kHz] 700 Vac 0.001F - p = 15 0.01F - p = 15 0.022F - p = 22.5 0.01F - p = 15 0.033F - p = 22.5 0.1F - p = 27.5 10 100 10 1 10 Vrms [V] 1000 100 1000 f [kHz] 100 1000 f [kHz] 900 Vac 0.0015F - p = 22.5 0.0047F - p = 22.5 0.015F - p = 22.5 100 10 1 Note: 10 p (pitch) in mm 1 10