RW, RW E, RW Ni www.vishay.com Vishay Draloric Vitreous Wirewound Resistors acc. MIL-PRF-26 FEATURES * Very high operating voltage * Excellent pulse load capability * Models acc. to MIL-PRF-26 available * Adjustable type (E) available * Non inductive type (Ni) available * Non-flammable and enhanced humidity protection The RW series, with completely welded construction, is the perfect choice for high continuous power dissipation up to 480 W with the option for adjustable (RW E) and non-inductive types (RW Ni). The components of this series are well suited for harsh environments and exhibit a long lifetime. With their high pulse power capabilities and high operating voltages, they are an ideal choice for inrush limiters. Typical applications include but are not limited to drive systems, frequency inverters, AC and DC filters, HVDC, SVC, and snubber resistors. Particular requirements can be submitted to a Vishay Draloric application engineer specifying peak voltage, pulse shape, pulse duration, and environmental conditions for review. * Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS * Inrush current limiter * Capacitor charge / discharge * Snubber resistor * Brake resistor * Filter resistor TECHNICAL SPECIFICATION TYPE / VARIANT RATED DISSIPATION P40 RESISTANCE RANGE (1) TCR -10 ppm/K to -80 ppm/K RESISTANCE RANGE (2) TCR +100 ppm/K to +180 ppm/K RW 10/44 18 W 1.0 to 3.0 3.3 to 36 k RW 10/44 E 11 W 1.0 to 3.0 3.3 to 1.6 k RW 10/44 Ni 11 W - 6.2 to 2.4 k RW 12/25 11 W 0.39 to 1.3 1.5 to 13 k RW 12/38 15 W 1.0 to 2.7 3.0 to 33 k RW 12/38 E 14 W - 4.3 to 1.5 k RW 12/38 Ni 14 W - 5.6 to 2.2 k RW 12/51 25 W 1.0 to 3.9 4.3 to 56 k RW 12/51 E 17 W 1.0 to 4.3 4.7 to 2.4 k RW 12/51 Ni 17 W - 9.1 to 3.6 k RW 12/76 45 W 2.0 to 6.8 7.5 to 91 k RW 12/76 E 27 W 2.0 to 6.8 7.5 to 4.3 k RW 12/76 Ni 27 W - 16 to 6.2 k RW 20/76 70 W 1.0 to 11 12 to 75 k RW 20/76 E 42 W 1.0 to 11 12 to 6.8 k RW 20/76 Ni 42 W - 24 to 10 k RW 20/102 90 W 3.0 to 16 18 to 110 k RW 20/102 E 55 W 3.0 to 16 18 to 10 k RW 20/102 Ni 55 W - 36 to 15 k RW 30/102 130 W 7.5 to 10 RW 30/102 E 80 W 7.5 to 10 Revision: 02-Jun-16 RESISTANCE TOLERANCE OPERATING VOLTAGE Umax. 400 V 120 V 350 V 600 V 5 %, 10 % 1000 V 1400 V 2.7 to 6.8 11 to 160 k 2.7 to 6.8 1600 V 11 to 15 k Document Number: 21005 1 For technical questions, contact: ww1resistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 RW, RW E, RW Ni www.vishay.com Vishay Draloric TECHNICAL SPECIFICATION RATED DISSIPATION P40 RESISTANCE RANGE (1) TCR -10 ppm/K to -80 ppm/K RW 30/152 220 W 12 to 16 RW 30/152 E 130 W 12 to 16 RW 30/203 300 W 16 to 22 TYPE / VARIANT RW 30/203 E 180 W 16 to 22 RW 30/267 400 W 24 to 30 RW 30/267 E 240 W 24 to 30 RW 30/305 480 W 27 to 36 RESISTANCE RANGE (2) TCR +100 ppm/K to +180 ppm/K RESISTANCE TOLERANCE OPERATING VOLTAGE Umax. 4.7 to 11 18 to 200 k 2500 V 4.7 to 11 18 to 24 k 6.8 to 15 24 to 270 k 3600 V 6.8 to 15 24 to 36 k 8.2 to 22 5 %, 10 % 33 to 390 k 5000 V 8.2 to 22 33 to 47 k 10 to 24 39 to 300 k 6000 V 10 to 24 290 W 27 to 36 (3) 11 W - 4.3 to 5.6 k 400 V RW 30 (3) 11 W - 3.6 to 2.7 k 120 V RW 31 (3) 14 W - 3.9 to 6.8 k 350 V (3) 17 W - 4.3 to 10 k 600 V RW 33 (3) 26 W - 8.2 to 18 k 1000 V RW 35 (3) 55 W - 18 to 43 k RW 30/305 E RW 29 RW 32 39 to 56 k 5 % 1400 V 78 W - 24 to 56 k 1600 V RW 37 (3) 113 W - 33 to 91 k 2500 V (3) 159 W - 47 to 150 k 3600 V RW 47 (3) 210 W - 75 to 180 k 5000 V RW 36 RW 38 (3) Notes * The operating temperature range for these resistors is from -55 C up to 350 C. * Resistance values are to be selected for 10 % from the E12 series, and for 5 from the E24 series. (1) Values with the TCR of -10 ppm/K to -80 ppm/K are produced with corrugated ribbon. (2) Low ohmic values with the TCR of +100 ppm/K to +180 ppm/K are produced with corrugated ribbon. (3) Types according to MIL-PRF-26. Revision: 02-Jun-16 Document Number: 21005 2 For technical questions, contact: ww1resistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 RW, RW E, RW Ni www.vishay.com Vishay Draloric TERMINALS SL FST e e TYPE / VARIANT Lug for soldering RW 10/44 RW 10/44 E RW 10/44 Ni RW 29 (1) Fast on terminal with 6.3 mm x 0.8 mm DIN 46244 e = 1.65 mm b = 6.3 mm RW 12/25 RW 30 (1) RW 12/38 RW 12/38 E RW 12/38 Ni RW 31 (1) b - e = 3.2 mm RW 12/51 RW 12/51 E RW 12/51 Ni RW 32 (1) RW 12/76 RW 12/76 E RW 12/76 Ni RW 33 (1) RW 20/76 RW 20/76 E RW 20/76 Ni RW 20/102 RW 20/102 E RW 20/102 Ni RW 35 (1) e = 1.65 mm b = 6.3 mm RW 30/102 RW 30/102 E RW 36 (1) RW 30/152 RW 30/152 E RW 37 (1) e = 4.2 mm RW 30/203 RW 30/203 E RW 38 (1) RW 30/267 RW 30/267 E RW 47 (1) RW 30/305 RW 30/305 E Note (1) Types according to MIL-PRF-26. Revision: 02-Jun-16 Document Number: 21005 3 For technical questions, contact: ww1resistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 RW, RW E, RW Ni www.vishay.com Vishay Draloric PACKAGING TYPE PACKAGING CODE QUANTITY FORMAT DIMENSION OF PACKAGE LX Variable Bulk, separately packed with paper Box size selection according to quantity and product size All PART NUMBER AND PRODUCT DESCRIPTION Part Number: RW0104411009JLX000 R W 0 1 0 4 4 1 1 0 MODEL SPECIAL CHARACTER VALUE RW01044 = RW 10/44 RW01225 = RW 12/25 RW01238 = RW 12/38 RW01251 = RW 12/51 RW01276 = RW 12/76 RW02076 = RW 20/76 RW20102 = RW 20/102 RW30102 = RW 30/102 RW30152 = RW 30/152 RW30203 = RW 30/203 RW30267 = RW 30/267 RW30305 = RW 30/305 RW00029 = RW 29 RW00030 = RW 30 RW00031 = RW 31 RW00032 = RW 32 RW00033 = RW 33 RW00035 = RW 35 RW00036 = RW 36 RW00037 = RW 37 RW00038 = RW 38 RW00047 = RW 47 0 = neutral 1=E 7 = FST C = E FST 3 digit value 1 digit multiplier MULTIPLIER 7 = *10-3 8 = *10-2 9 = *10-1 0 = *100 1 = *101 2 = *102 3 = *103 0 9 J L X 0 0 0 TOLERANCE CODE PACKAGING CODE SPECIAL J=5% K = 10 % LX = loose pack without quantity 000 = standard 3 digit code = customized version (1) Product Description: RW 10/44 E 10R 5 % RW 10/44 E 10R 5% TYPE VARIANT / TERMINAL RESISTANCE TOLERANCE CODE RW10/44 RW12/35 RW12/38 RW12/51 RW12/76 RW20/76 RW20/102 RW30/102 RW30/152 RW30/203 RW30/267 RW30/305 RW29 ... RW47 Neutral E (adjustable) FST E FST R39 = 0.39 300K = 300 k 5% 10 % Notes * The products can be ordered using either the PRODUCT DESCRIPTION or the PART NUMBER. (1) For special windings or the non-inductive (RW Ni) versions, please contact: ww1resistors@vishay.com. Revision: 02-Jun-16 Document Number: 21005 4 For technical questions, contact: ww1resistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 RW, RW E, RW Ni www.vishay.com Vishay Draloric DESCRIPTION ASSEMBLY The rugged design and durable coating of Vitreous wirewound resistors enable them to withstand extreme environmental stress. For this reason they are well suited for use in demanding environmental conditions. The glaze is fired layer by layer several times at high temperatures (> 600 C). This vitreous coating is designed for high stability and a long lifetime in humid environments and is resistant to all cleaning chemicals commonly used in the electronic industry. The resistors are available with lug style terminals for soldering assembly processes or with fast plug terminals (FST style) for assembly / disassembly processes. The terminals of the resistors are completely lead (Pb)-free. The special tin plating used provides compatibility with lead (Pb)-free and lead-containing soldering processes. Production is strictly controlled and follows an extensive set of instructions established for reproducibility. The winding is done with specific materials on a specially developed fine ceramic body (Al2O3). The ceramic used meets the highest requirements against mechanical resistance, thermal shock, dielectric strength, and insulation resistance at high temperatures. With different diameters and turn spacings, a large ohmic value range can be offered. The resistors are marked with resistance and tolerance. The RW series meets single lot / date code packaging requirements. MATERIALS Vishay acknowledges the following systems for the regulation of hazardous substances: * IEC 62474, Material Declaration for Products of and for the Electrotechnical Industry, with the list of declarable substances given therein (1) * The Global Automotive Declarable Substance List (GADSL) (2) * The REACH regulation (1907/2006/EC) and the related list of substances with very high concern (SVHC) (3) for its supply chain The products do not contain any of the banned substances as per IEC 62474, GADSL, or the SVHC list, see www.vishay.com/how/leadfree. Hence the products fully comply with the following directives: * 2000/53/EC End-of-Life Vehicle Directive (ELV) and Annex II (ELV II) * 2011/65/EU Restriction of the Use of Hazardous Substances Directive (RoHS) with amendment 2015/863/EU * 2012/19/EU Waste Electrical and Electronic Equipment Directive (WEEE) Vishay pursues the elimination of conflict minerals from its supply chain, see the Conflict Minerals Policy at www.vishay.com/doc?49037. Special lugs are available on request, please inquire at ww1resistors@vishay.com. 3D-Models are available on request, please inquire at ww1resistors@vishay.com. Different mounting accessories are available, see the datasheet: www.vishay.com/doc?21015. The slider of the adjustable type should be only moved after removal of voltage and sufficient loosening of the screw. APPLICATION INFORMATION The power dissipation of the resistor generates a temperature rise with respect to the ambient. The permissible dissipation is derated for temperatures above 40C, as shown in the derating diagram, in order to avoid overheating of the resistor. The heat dissipated from the resistor may affect adjacent components, hence proper clearance will be required in order to avoid overheating. All materials used are non-flammable and inorganic. These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift increasing over operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a functional lifetime. RELATED PRODUCTS In lower continuous power applications and less demanding environmental conditions the cement coated alternative, like the ZWS series might be suitable, see the datasheet: "Cemented Wirewound Resistors with Lugs" www.vishay.com/doc?21010 For low ohmic values and rated dissipation up to 1000 W, there is the vitreous coated GBS series, see the datasheet: "Vitreous Wirewound Resistors with Corrugated Ribbon" www.vishay.com/doc?21004 For higher power dissipation and different lugs, there is the vitreous coated GWS series, see the datasheet: "Vitreous Wirewound Resistors with Lugs" www.vishay.com/doc?21003 Notes (1) The IEC 62474 list of declarable substances is maintained in a dedicated database, which is available at http://std.iec.ch/iec62474. (2) The Global Automotive Declarable Substance List (GADSL) is maintained by the American Chemistry Council, and available at www.gadsl.org. (3) The SVHC list is maintained by the European Chemical Agency (ECHA) and available at http://echa.europa.eu/candidate-list-table. Revision: 02-Jun-16 Document Number: 21005 5 For technical questions, contact: ww1resistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 RW, RW E, RW Ni www.vishay.com Vishay Draloric DERATING 10000 100 80 1000 60 40 100 20 0 -100 Transient Thermal Impedance Transient Thermal Impedance 2nd line Rated Dissipation (%) Axis Title 120 10 -50 -55 0 50 100 150 200 40 250 300 350 Ambient Temperature (C) 2nd line TEMPERATURE RISE 10000 400 RW 12/25 RW 10/44 1000 300 200 100 100 0 Transient Thermal Impedance Transient Thermal Impedance 2nd line Temperature Rise (K) Axis Title 500 10 0 5 10 15 20 25 Dissipation (W) 2nd line MIL-PRF-26 Char. V 10000 400 RW 12/51 1000 RW 12/38 300 200 100 100 0 10 0 5 10 15 MIL-PRF-26 Char. V Revision: 02-Jun-16 Transient Thermal Impedance Transient Thermal Impedance 2nd line Temperature Rise (K) Axis Title 500 20 25 Dissipation (W) 2nd line Document Number: 21005 6 For technical questions, contact: ww1resistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 RW, RW E, RW Ni www.vishay.com Vishay Draloric 500 RW 12/76 400 RW 20/76 1000 300 200 100 100 0 10 0 20 40 60 80 Dissipation (W) 2nd line 500 RW 20/102 400 RW 30/102 1000 300 200 100 100 0 10 0 25 50 75 100 125 2nd line Temperature Rise (K) 150 Dissipation (W) 2nd line MIL-PRF-26 Char. V 500 10000 RW 30/152 400 RW 30/203 1000 300 200 100 100 0 10 0 50 100 150 200 250 300 Dissipation (W) 2nd line MIL-PRF-26 Char. V 2nd line Temperature Rise (K) Transient Thermal Impedance Transient Thermal Impedance 10000 Transient Thermal Impedance Transient Thermal Impedance 2nd line Temperature Rise (K) MIL-PRF-26 Char. V 500 10000 RW 30/305 RW 30/267 400 1000 300 200 100 100 0 10 0 100 200 300 MIL-PRF-26 Char. V Revision: 02-Jun-16 Transient Thermal Impedance Transient Thermal Impedance 10000 Transient Thermal Impedance Transient Thermal Impedance 2nd line Temperature Rise (K) TEMPERATURE RISE 400 500 Dissipation (W) 2nd line Document Number: 21005 7 For technical questions, contact: ww1resistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 RW, RW E, RW Ni www.vishay.com Vishay Draloric DIMENSIONS AND MASS Dmax. L 4 + 0.5 [0.157 + 0.020] c1 d e1 c 2.5 [0.098] 0.8 [0.030] thickness 8 0.1 [0.310 + 0.004] e b 2.5 [0.098] b1 s a 1.65 + 0.1 [0.065 + 0.004] 6.3 + 0.1 [0.248 + 0.004] a1 FST A 6.3 mm/DIN 46244 (at end terminals only) Adjustable lug with contact stud Dmax. (1) (mm) L (mm) a (mm) a1 (mm) b (mm) b1 (mm) c (mm) c1 (mm) d (mm) e (mm) e1 (mm) RW 10/44 RW 10/44 E RW 10/44 Ni RW 29 (2) 12.7 (15.7) 44.4 1.6 33.4 31.4 6.0 5.0 16.5 18.5 4.5 3.2 2.8 0.6 10 RW 12/25 RW 30 (2) 15.1 (18.1) 25.4 1.6 14.4 - 6.0 - 17.5 - 5.5 3.2 - 0.6 10 RW 12/38 RW 12/38 E RW 12/38 Ni RW 31 (2) 15.1 (18.1) 38.1 1.6 27.1 25.1 6.0 5.0 17.5 19.0 5.5 3.2 3.2 0.6 10 RW 12/51 RW 12/51 E RW 12/51 Ni RW 32 (2) 15.1 (18.1) 50.8 1.6 39.8 37.8 6.0 5.0 17.5 19.0 5.5 3.2 3.2 0.6 15 RW 12/76 RW 12/76 E RW 12/76 Ni RW 33 (2) 15.1 (18.1) 76.2 1.6 65.2 63.2 6.0 5.0 17.5 19.0 5.5 3.2 3.2 0.6 15 RW 20/76 RW 20/76 E RW 20/76 Ni 23.0 (26.0) 76.2 1.6 63.2 63.2 8.0 5.0 22.0 23.0 12.0 4.2 3.2 0.8 30 RW 20/102 RW 20/102 E RW 20/102 Ni RW 35 (2) 23.0 (26.0) 101.6 1.6 88.6 88.6 8.0 5.0 22.0 23.0 12.0 4.2 3.2 0.8 62 RW 30/102 RW 30/102 E RW 36 (2) 33.3 (36.3) 101.6 1.6 88.6 88.6 8.0 8.0 31.0 27.0 18.5 4.2 4.2 0.8 136 RW 30/152 RW 30/152 E RW 37 (2) 33.3 (36.3) 152.4 1.6 139.4 139.4 8.0 8.0 31.0 27.0 18.5 4.2 4.2 0.8 200 RW 30/203 RW 30/203 E RW 38 (2) 33.3 (36.3) 203.2 1.6 190.2 190.2 8.0 8.0 31.0 27.0 18.5 4.2 4.2 0.8 260 RW 30/267 RW 30/267 E RW 47 (2) 33.3 (36.3) 266.7 1.6 253.7 253.7 8.0 8.0 31.0 27.0 18.5 4.2 4.2 0.8 330 RW 30/305 RW 30/305 E 33.3 (36.3) 304.8 1.6 291.8 291.8 8.0 8.0 31.0 27.0 18.5 4.2 4.2 0.8 430 TYPE / VARIANT s MASS (mm) (g) Notes (1) Numbers in (parenthesis) represent the dimension D max. for resistor produced with corrugated ribbon. (2) Types according to MIL-PRF-26. Revision: 02-Jun-16 Document Number: 21005 8 For technical questions, contact: ww1resistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2019 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2019 1 Document Number: 91000