SIDACtor (R) Protection Thyristors High Surge Current Protection SIDACtor(R) Series - DO-214AB Pb e3 RoHS Description SIDACtor(R) Series DO-214AB (Surface Mount) package are designed to protect low data rate interface and outdoor data interface such as RS-232 or RS-423 in industrial market. They provide a surface mount solution that enables equipment to comply with global regulatory standards. The component's switching threshold Vs and on-state voltage VT are much lower than traditional Gas Discharge Tube (GDT) technology. Features and Benefits * Low voltage overshoot * Low on-state voltage * Component properties do not degrade after multiple surge events within its limits Agency Approvals Agency Agency File Number * Fast response in microseconds * 2nd level interconnect is Pb-free per IPC/JEDEC J-STD-609A.01 * Fails short circuit when surged in excess of ratings E133083 Applicable Global Standards Pinout Designation Not Applicable Schematic Symbol * TIA-968-A * GR 1089 Intra-building * TIA-968-B * IEC 61000-4-5 * ITU K.20/21 Enhanced Level * YD/T 1082 * ITU K.20/21 Basic Level * YD/T 950 * YD/T 993 * GR 1089 Inter-building Electrical Characteristics Part Number Marking P0080S3NLRP P0300S3NLRP P-8N P03N VDRM @lDRM=5A VS @100V/s V min V max 6 30 25 45 IH IS IT mA min mA max A max 50 50 800 800 2.2 2.2 VT @IT=2.2A Capacitance @1MHz, 2V bias V max pf min pF max 4 4 80 80 150 150 Notes: - Absolute maximum ratings measured at TA= 25C (unless otherwise noted). - Components are bi-directional (unless otherwise noted). Surge Ratings IPP Series N 8/201 1.2/502 ITSM 50 / 60 Hz di/dt A min A min A/s max 2500 250 630 (c) 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/24/16 Notes: 1 Current waveform in s 2 Voltage waveform in s - Peak pulse current rating (IPP) is repetitive and guaranteed for the life of the product. - IPP ratings applicable over temperature range of -40C to +85C - The device must initially be in thermal equilibrium with -40C < TJ < +150C SIDACtor(R) Series DO-214AB SIDACtor (R) Protection Thyristors High Surge Current Protection Thermal Considerations Package DO-214AB Symbol Parameter Value Unit TJ Operating Junction Temperature Range -65 to +150 C TS Storage Temperature Range -65 to +150 C R0JA Thermal Resistance: Junction to Ambient 75 C/W V-I Characteristics tr x td Pulse Waveform IT IS IH IDRM -V +V VT VDRM VS IPP - Peak Pulse Current - %IPP +I Peak Value 100 tr = rise time to peak value td = decay time to half value Waveform = tr x td 50 Half Value 0 0 td tr t - Time (s) -I Normalized VS Change vs. Junction Temperature Normalized DC Holding Current vs. Case Temperature IH 10 8 6 25 C 4 Ratio of Percent of VS Change - % 12 IH (TC = 25C) 2.0 14 2 0 -4 -6 1.8 1.6 1.4 1.0 0.8 0.6 0.4 -8 -40 -20 0 20 40 60 80 100 120 140 160 Junction Temperature (TJ) - C (c) 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/24/16 25C 1.2 -40 -20 0 20 40 60 80 100 120 140 160 Case Temperature (TC) - C SIDACtor(R) Series DO-214AB SIDACtor (R) Protection Thyristors High Surge Current Protection Soldering Parameters Pb-Free assembly (see Fig. 1) +150C +200C 60-180 secs. - Temperature Min (Ts(min)) Pre Heat - Temperature Max (Ts(max)) - Time (Min to Max) (ts) Average ramp up rate (Liquidus Temp (TL) to peak) 3C/sec. Max. TS(max) to TL - Ramp-up Rate 3C/sec. Max. Reflow - Temperature (TL) (Liquidus) +217C - Temperature (tL) 60-150 secs. Peak Temp (TP) +260(+0/-5)C Time within 5C of actual Peak Temp (tp) 30 secs. Max. Ramp-down Rate 6C/sec. Max. Time 25C to Peak Temp (TP) 8 min. Max. Do not exceed +260C Physical Specifications TP tP Critical Zone TL to TP Ramp-up TL TS(max) tL Ramp-down Preheat TS(min) tS 25 time to peak temperature (t 25C to peak) Time Environmental Specifications Lead Material Copper Alloy Terminal Finish 100% Matte-Tin Plated Body Material Figure 1 Temperature Reflow Condition UL recognized epoxy meeting flammability classification V-0 Part Numbering High Temp Voltage Blocking 80% Rated VDRM (VAC Peak ) +125C or +150C, 504 or 1008 hrs. MIL-STD-750 (Method 1040) JEDEC, JESD22-A-101 Temp Cycling -65C to +150C, 15 min. dwell, 10 up to 100 cycles. MIL-STD-750 (Method 1051) EIA/JEDEC, JESD22-A104 Biased Temp & Humidity 52 VDC (+85C) 85%RH, 504 up to 1008 hrs. EIA/ JEDEC, JESD22-A-101 High Temp Storage +150C 1008 hrs. MIL-STD-750 (Method 1031) JEDEC, JESD22-A-101 Low Temp Storage -65C, 1008 hrs. Thermal Shock 0C to +100C, 5 min. dwell, 10 sec. transfer, 10 cycles. MIL-STD-750 (Method 1056) JEDEC, JESD22-A-106 Autoclave (Pressure Cooker Test) +121C, 100%RH, 2atm, 24 up to 168 hrs. EIA/ JEDEC, JESD22-A-102 Resistance to Solder Heat +260C, 30 secs. MIL-STD-750 (Method 2031) Moisture Sensitivity Level 85%RH, +85C, 168 hrs., 3 reflow cycles (+260C Peak). JEDEC-J-STD-020, Level 1 Part Marking P xxx 0 S3 N L RP TYPE P: SIDACtor MEDIAN VOLTAGE CONSTRUCTION VARIABLE REEL PACK RoHS COMPLIANT Pxxxx xxxxx Part Marking Code (Refer to Electrical Characteristics Table) Date Code IPP RATING PACKAGE TYPE (c) 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/24/16 SIDACtor(R) Series DO-214AB SIDACtor (R) Protection Thyristors High Surge Current Protection DO-214AA (SMB J-Bend) Dimensions -- DO-214AB Inches Dimensions C A B H D F E G L K J Dimension in inches and (millimeters) I Millimeters Min Max Min Max A 0.114 0.126 2.900 3.200 B 0.260 0.280 6.600 7.110 C 0.220 0.245 5.590 6.220 D 0.079 0.103 2.060 2.620 E 0.030 0.060 0.760 1.520 F - 0.008 - 0.203 G 0.305 0.320 7.750 8.130 H 0.006 0.012 0.152 0.305 I 0.129 - 3.300 - 2.400 J 0.094 - K - 0.165 L 0.094 - 4.200 2.400 - Solder Pads (all dimensions in mm) Packing Options Package Type S3 Description Quantity Added Suffix Industry Standard DO-214AB Tape and Reel Pack 3000 RP EIA-481-D tape and reel specification Tape and Reel Specification -- DO-214AB 0.157 (4.0) 0.472 (12.0) 0.36 (9.2) 0.315 (8.0) 0.059 DIA (1.5) 12.99 (330.0) 0.512 (13.0) Arbor Hole Dia. 0.49 (12.4) (c) 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/24/16 Cover tape Dimensions are in inches (and millimeters). Direction of Feed SIDACtor(R) Series DO-214AB