10 | 9 | 8 7 | 6 | 5 | 4 | 3 | 2 | 8,525 . . (2.5) nm (2.88) 9 (25) ryp 49) 335 . wll (3.85) , ut (2.54) TYP.2) (4.1) 5 cs rt (44) 10 6 ow . Slo 55 tae ale | IT [c}~< ee els t _ | __| PY L F i tty a Ud 1 | J] rn > ele F = iS F a ] YA r r 3 a si Fl Se f a3 s|g 3 f ls gig CO} A = jl-+ co tree |S 2} 4 ret 6S! Ug Bl ra r | i r | = r | Se] 4 | 1 ; => => r '3 LS r Ss = oF | J any 2 ~ @u > ma |e ; __ SEE NOTE 4 doy (ios) | . CCT No.1 a 42 *28 (6.3) LD. MARK [p] 3 1D ut 25 ol" o _ (14.584) MIN. TIN PLATE ele 5788 (3.0) | 3.0) | AREA, NOTES: oe (26.6) REF. _ I: FOR MATERIAL SPECIFICATION SEE 105 NOTE |. ON SHEET 2. 2 FOR RECOMMENDED PCB. HOLE PATTERN, to 77 PART Nos AND UNSTATED DIMENSIONS |(0.700/.028 |C |(0.60)7.024 Al Pf easuRE POINT SEE SHEET 2. |(0.60)7.024 |D |(0.80)7.031 |B] [= FOR GOLD PLATING 2: PRODUCT SPEC.No.: PS-99020-0015. MIN. GOLD PLATE (5.10) THICKNESS TYP. 4: THIS RIB IS NOT PRESENT ON GOLD END OF PIN AREA. METAL A 20 (3.0) 10 & 14 CKT PARTS. Sle n/S 2 as x (6.0) DIMENSIONS FOR SELECTIVE ; ce | 4 PLATINGS, SCALE 4:1 | AZ, L @ =] Jauauty] GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS THIRD ANGLE = S22) |symaois| (UNLESS SPECIFIED) MM/IN 2:1 METRIC |Q Cl sRoVECTION __| Pp _| & See mm INCH DRAWN BY DATE TITLE QFS50 SRD HDR =~ ~ SSS|z/W-0 (7 Places ---__[+---___ POB 1990/08/03 72] (3.55 ) 7.4 (5.8 * ) |= 8 S E Vv 3 PLACES|+--- 14.008 [CHECKED BY DATE VT W/ELV ci] | +4 29 23% ze FS L|8|\/-0 [2 Placesito20 |+.008 |JDENNEHY 2004/11/24 ~ oO 2 = W 1 PLACE [0.20 [4--- APPROVED BY DATE sS es ANGULAR LD WDENNEHY 2004/11/24 fold MOLEX INCORPORATED _ oO 3 a Ww MATERIAL NO, DOCUMENT NO. SHEET NO, SECTION F-F SEE DETAIL A. BofEe DRAFT WHERE APPLICABLE] SEE SHEET 2 |SDA-90663E 1 OF 9 Woo = _ wT bE es SIZE] THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX H w AS INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION b_f _A3_P_ME_T Rev. D 2004/04/02 9 6 7 | 6 5 | 4 | 3 | 2 110 (78.74)/3.100 | (86.34)/3.400 | (90.52)/3.564 | (96.62)/3.804 |(100.74)/3.966|} 90663-1641 90663-1642 90663-1643 64 (73.66)/2.900 | (81.26)/3.200 | (85.44)/3.364 | (91.54)/3.604 | (95.66)/3.766 -|I601 -1602 - 1603 60 (60.96)/2.400 | (68.56)/2.700 | (72.74)/2.864 | (78.84)/3.104 | (82.96)/3.266 -|501 - 1502 - 1503 90663-1509 | 50 (48.26)/ 1.900 | (55.86)/2.200 | (60.04)/2.364 | (66.14)/2.604 | (70.26)/2.766 -|40l - 1402 - 1403 -1409 | 40 (40.64)/ 1.600 | (48.24)/ 1.900 | (52.42)/2,064 | (58.52)/2.304 | (62.64)/2.466 -1341 -1342 - 1343 -1349 | 34 (35.56)/ 1.400 | (43.16)/1.700 | (47.34)/ 1.864 | (53.44)/2. 104 | (57.56)/2.266 -|301 - 1302 - 1303 -1309 | 30 (30.48)/ 1.200 | (38.08)/ 1.500 | (42.26)/ 1.664 | (48.36) 1.904 | (52.48)/2.066 -|261 - (262 -1263 -1269 | 26 (22.86)7.900 | (30.46)/ 1.200 | (34.64)/ 1.364 | (40.74)/ 1,604 | (44.86)/ 1.766 -|201 -|202 - 1203 -1209 | 20 (17.78)7.700 | (25.38)/ 1.000 | (29.56)/ 1.164 | (35.66)/ 1.404 | (39.78)/ 1.566 -1161 -1162 -1163 -1169 I6 (15.24)7.600 | (22.84)/.900 | (27.02)/ 1.064 | (33.12)/ 1.304 | (37.24)/ 1.466 -1141 -1142 -1143 -1149 14 (10.16)/.400 (17.76)7,700 (2 1.94)/.864 | (28.04)/ 1.104 | (32.16)/ 1.266 90663-1101 90663-1102 90663-1103 90663-1109 10 A B Cc D E ENG. NO. ENG. NO. ENG. NO. ENG. NO. NO.OF GSI PLATING | GS2 PLATING | GS3 PLATING PRE TIN CKTS. NOTES |. MATERIAL (1.520 ) (3.14) HEADER : GLASS FILLED POLYESTER (UL 94V0), COLOUR - BLACK. 060 0 199 004 TYP.(2) PINS : BRASS SIZE 4 (0.635)/.025 . . . LEVER : GLASS FILLED POLYESTER (UL 94V0), COLOUR - BLACK. 2.PLATING OPTIONS. 90663-l**1, (lum)/.039uIn MIN. NICKEL UNDERPLATE. CONTACT AREA . GSI PLATING (O.lum)/.004uIn MIN. GOLD. SOLDER AREA (3um)/.1I8uln MIN. TIN. 90663-l*#2, (lum)/.039uin MIN. NICKEL UNDERPLATE. CONTACT AREA 6 d GS2 PLATING (0.76um)/.030uIn MIN. GOLD. SOLDER AREA (3um)/.1I8uIn MIN. 66 2 r TIN. oC(1.0o 3 z 3 a = 90663-l*#3, (lum)/.039uin MIN. NICKEL UNDERPLATE. CONTACT AREA oo g 039 78" 06 a S g T 2 3 GS3 PLATING (0.25um)/.0l0uln MIN. GOLD. SOLDER AREA (3um)/.||8uIn MIN. Ns <f Qa TIN. oo ~ 90663-l*#9, (0.5-lum)/.020-.040uIn NICKEL UNDER (1.0-3.0um)/.039-.1|8uIn TIN. oe a PRE-TIN 3. RECOMMENDED PCB THICKNESS 1.6mm , o = a a QUALITY GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS THIRD ANGLE AN * 82882) |sympois| (UNLESS SPECIFIED) MM/IN 2:1 METRIC |OC] PROJECTION - 3 a = = = mm INCH DRAWN BY DATE TITLE mare go SSS /Z/-0 [ZPLAces|#---__[--- 0B 1990/08/03 QF50 SRD HDR (2.54!) a8 53 = 3 PLACES|+--- _|+.008 __|CHECKED BY DATE VT W/ELV 100-2 LY Fes L|S\\/-0 [2 PLACES[0.20 [4.008 |JDENNEHY 2004/11/24 . Lost == Ww 1 PLACE + 0.20 +--- APPROVED BY DATE BSS e ANGULAR 2 WDENNEHY 2004/11/24 fold MOLEX INCORPORATED RECOMMENDED P.C.B.HOLE PATTERN. a S258 MATERIAL NO. DOCUMENT NO. SHEET NO, BO e=e DRAFT WHERE APPLICABLE] SEE CHART |SDA-90663E 2 OF 9 fmou<| wT bE es SIZE] THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX H ip A S|INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION b_frame_A3_P_ME_T | Rev. D 2004704/02, 9 8 7 6 5 | | 3 | 2 4