FPGA Development Kit
TM
+
715.575.3150 | AloriumTech.com
Kit Includes
•Snō mounted on SnōMākr
• USB Cable
Snō Technical Specifications
• Intel MAX 10 FPGA (16K LE)
• Embedded 8-bit Microcontroller
• AVR Compatible
• Selectable 16/32 MHz
• Integrated Hardware Acceleration
• Pre-installed Xcelerator Blocks
• Customizable FPGA fabric
• 32 Dedicated Digital, 6 Shared w/ Analog (3.3V)
• 6 Analog Pins
• Program FLASH: 32 KB
• Data Memory SRAM: 2 KB
• ADC Performance
• Speed: 1 MHz
• Resolution: 12-bit sustained
• Sample Rate: 254k samples/second
The speed and performance of FPGA powered
acceleration and offload in a small footprint.
Compact, Embeddable Footprint
Take advantage of pre-installed XBs that target
application-specific behavior such as floating-point
math, motion control and sensor data acquisition.
Hardware Xcelerator Blocks (XBs)
Rapidly develop your solution using the free and
flexible Arduino IDE.
Programmable with Arduino
Install Arduino IDE
Accelerate your IoT Project!
Buy Snō + SnōMākr Kit
3 Easy Steps to Higher Performance
1
2
3
