G 2 AMP SURFACE MOUNT GLASS SUPER FAST RECOVERY RECTIFIER Mi FEATURES e For surface mount applications e Super fast recovery time e Reliable low cost construction utilizing molded plastic technique e Low forward voltage drop e UL recognized 94V-O plastic material e High temperature soldering: 250 C/10 seconds at terminal Glass passivated junction Mi Mechanical Data Case: Molded plastic Polarity: Indicated on cathode Weight: 0.003 ounces, 0.093 grams Maximum Ratings & Characteristics ES2A Thru ES2D I Outline Drawing SMB scera21) nT . 160 (4.08) one _ 103(2.62 + 008/20) | 9e0i1.52)) Lae .220(5.58) 080(0. 78) pe 0 2) Dimensions in inches and (millimeters) Ratings at 25 C ambient temperature unless otherwise specified @ Single phase, half wave, 60Hz, resistive or inductive load For capacitive load, derate current by 20% ES2A ES2B ES2Cc ES2D Units Maximum Recurrent Peak Reverse Voltage VRRM 50 100 150 200 Vv Maximum RMS Input Voltage VRMS 35 70 105 140 V Maximum DC Blocking Voltage Vpc 50 100 150 200 Vv Maximum Average Forward Output Current law 20 A .375" 9.5mm lead length @ TL=110C Peak Forward Surge Current 8.3 ms Single Half-Sine-Wave lrsm 50 A Superimposed On Rated Load MaximumForward Voltage Drop At 2.0A VE 0.9 Vv Maximum Reverse Current At Rated @ TA= 25C Ir 5 LA DC Blocking Voltage per Bridge Element @ Ta = 100C 350 pA Maximum Reverse Recovery Time (See Note) ter 25 ns Typical Junction Capacitance** (See Note) Cy 25 pF Maximum Thermal Resistance***(See Note) RtHJL) 20 CiW Operating Temperature Range TJ -65 to +150 C Storage Temperature Range TstG -65 to +150 C Note: *Test conditions: IF=0.5A, IR = 1.0A, Irr = 0.25A **Measured at 1.0 MHZ and applied reverse voltage of 4.0V DC Thermal resistance junction to lead measured on PC board 5.0mm? X (0.013mm thick) Collmer Semiconductor, Inc.