0603 (1608) drahtgewickelt (AgPd/Ni/Sn Metallisierung) 0603 (1608) wire-wound (AgPd/Ni/Sn Metallisation) - 18 - Allgemeine Eigenschaften zu den drahtgewickelten SMD-Spulen Bauform 0603 / Baureihe 5406 General Characteristics of Wirewound SMD Inductors Size 0603 / Series 5406 SUMIDA Components erweitert sein Spektrum der drahtgewickelten Chipspulen der Baugroe 0603. Auf Keramikkorper sind nun Induktivitaten von 1,5 nH bis 470 nH verfugbar. Diese Induktivitatswerte werden auf SUMIDA Components-Keramikkorpern gewickelt, wodurch besonders hohe Resonanzfrequenzen bzw. Guten spezifiziert werden konnen. Dadurch eignen sie sich fur Applikationen mit besonderen Anspruchen z.B. fur SUMIDA Components extended the programme of existing wire-wound chip inductors size 0603. On ceramic bodies there are a wide range of inductances available from 1,5 nH to 470 nH. All inductance values are wound on SUMIDA Components ceramic bodies which perform extraordinary high resonance frequencies and quality factors. Therefore, they are suited for applications with special requirements as for: HF-Technik Antennenverstarker Tuner, Basisstationen oder SAT-Receiver - RF technique Antenna Amplifiers Tuners, Base Stations or SAT Receivers Zusatzlich bietet SUMIDA Components nun auch SMD-Spulen der Bauform 0603 gewickelt auf einem Ferrit-Kern an. Hier sind Induktivitaten von 470 nH bis 2700 nH verfugbar. - Additional SUMIDA Components offers now the SMD inductors size 0603 wired on a ferrite body. Here are inductances from 470nH to 2700 nH available. Anfragen nach Sonderinduktivitaten oder -toleranzen werden auf Machbarkeit uberpruft. Feasibility of special inductances or tolerances are tested on request. Material des Spulenkerns Material of the coil core Keramik / Ceramic Ferrit / Ferrite Inductance L 1,5 ...470 nH 470 ... 2700 nH Toleranz Tolerance - 2/5/10/20 % Minimale Gute Minimum Q-factor Eigenresonanzfrequenz Self resonance0 frequency Max. Gleichstromwiderstand Max. DC resistance Nennstrom (bez. auf 85 C) Nominal Current (ref. To 85 C) Zulassiger Betriebstemperaturbereich permissable operating temperature range 1) 1) 2/5/10/20 % 1) Qmin 22 ... 45 12 fres , min > 6000 ... 810 MHz 600 ... 200 MHz RDC, max 25 ... 4000 m 400 ... 200 m IN 1000 ... 80 mA 2) 460 ... 180 mA 2) - - 55 ... 125 C - 55 ... 125 C Standard-Toleranzen - engere Toleranzen auf Anfrage Standard tolerances - tighter tolerances on request 2) - 19 - N Induktivitat EW Material des Spulenkerns Material of the coil core Symbol Symbol Nennstrom (max) bis 85 C Umgebungstemperatur maximum rated current at ambient temperature 85 C Bestellhinweise: Ordering Instructions: Erklarungen des Artikelnummern-Schlussels Explanations of Part Code 5406 27 0 * 4 00 Lieferform / Delivery Form Bezeichnung / Designation Chip-Induktivitat / Inductance (Baugroe 0603 / Size 0603) 4 vergossen, gegurtet auf 8 mm Blistergurt coated, taped on 8 mm blister tape Induktivitat L / Inductance L Multiplikator fur L: 10x Multiplier for L: 10x (Beispiel / example 27 nH) Verpackungseinheit 0603: Packing Unit 0603: Rollen O 180 mm, 4.000 Stuck Reels O 180 mm, 4.000 pcs. Bestellbeispiel / Ordering examples: Chipspule / Chip Coil 0603, 270 nH, Tol. 5 % vergossen gegurtet coated, tape & reel = 5406 271 34 00 - 20 - Induktivitats-Toleranz Inductance Tolerance 1 20 % 2 10 % 35% 42% 9 Sondertoleranz Special Tolerance Technische Informationen Baugroe 0603 / Baureihe 5406 drahtgewickelt: Technical Details Size 0603 / Series 5406 wire-wound: Bauteilabmessungen und Pad-Layout-Empfehlung Component Dimensions and Pad Layout Recommendation Drahtenden (= metallisierte Flache) / 0,45 0,2 0,90 1,60 0,85 1,2 0,2 +0,15 0,10 C 0,90 0,15 wire leads (=metallization area) 0 0,05 +0,10 0,05 Inkl. Metallisierung, Wicklung und Vergu / C = with metallization, winding and coating Metallisierung / = metallization Vergu / = coating verpackt und gegurtet in Super 8 Band / 1,7 0,1 packed and taped in super 8 tape c Layoutempfehlung / Layout recommendation: a b b a 0,8....1,0 2,0....2,5 c 0,7....0,9 Mae / Dimensions (mm) - 21 - Qtyp fL,Q fres,min RDC,max IN,max Tol. Order No. [nH] @ 800 MHz [MHz] [MHz] [m] [mA] [%] 5406 015 ** ** 1,5 22 45 250 6000 25 1000 10/20 5406 018 ** ** 1,8 22 35 250 6000 35 900 10/20 5406 033 ** ** 3,3 30 55 250 6000 40 800 10/20 5406 036 ** ** 3,6 35 50 250 6000 35 900 10/20 5406 039 ** ** 3,9 35 50 250 6000 35 900 10/20 5406 047 ** ** 4,7 28 45 250 6000 75 620 10/20 5406 056 ** ** 5,6 35 60 250 6000 40 840 5/10/20 5406 068 ** ** 6,8 40 70 250 5600 35 890 5/10/20 5406 082 ** ** 8,2 40 55 250 5500 60 700 5/10/20 5406 087 ** ** 8,7 35 70 250 5300 60 700 5/10/20 5406 100 ** ** 10 45 80 250 5000 45 780 2/5/10/20 5406 120 ** ** 12 40 70 250 4100 90 560 2/5/10/20 5406 150 ** ** 15 45 80 250 3300 55 710 2/5/10/20 5406 180 ** ** 18 45 75 250 3700 90 560 2/5/10/20 5406 220 ** ** 22 45 70 250 3100 135 450 2/5/10/20 5406 270 ** ** 27 45 70 250 2900 115 500 2/5/10/20 5406 330 ** ** 33 45 70 250 2550 115 490 2/5/10/20 5406 390 ** ** 39 45 65 250 2150 120 480 2/5/10/20 5406 470 ** ** 47 40 55 200 2050 200 380 2/5/10/20 5406 560 ** ** 56 40 50 200 2000 290 310 2/5/10/20 5406 680 ** ** 68 40 50 200 1700 360 280 2/5/10/20 5406 820 ** ** 82 35 60 150 1700 590 220 2/5/10/20 5406 101 ** ** 100 35 50 150 1550 890 180 2/5/10/20 5406 121 ** ** 120 35 50 150 1300 1100 160 2/5/10/20 5406 151 ** ** 150 30 40 100 1200 1200 150 2/5/10/20 5406 181 ** ** 180 30 35 100 1150 1300 140 2/5/10/20 5406 221 ** ** 220 30 30 100 1050 1900 120 2/5/10/20 5406 271 ** ** 270 30 - 100 990 2100 115 2/5/10/20 5406 331 ** ** 330 30 - 100 890 2900 95 2/5/10/20 5406 391 ** ** 390 30 - 100 810 4000 80 2/5/10/20 5496 471 ** ** 470 30 - 100 700 6200 80 2/5/10/20 5406 471 ** ** 470 12 - 7,9 650 400 460 2/5/10/20 5406 561 ** ** 560 12 - 7,9 535 410 360 2/5/10/20 5406 681 ** ** 680 12 - 7,9 510 580 330 2/5/10/20 5406 821 ** ** 820 12 - 7,9 470 780 320 2/5/10/20 5406 102 ** ** 1000 12 - 7,9 400 1100 280 2/5/10/20 5406 122 ** ** 1200 12 - 7,9 390 1160 230 2/5/10/20 5406 152 ** ** 1500 12 - 7,9 340 1580 220 2/5/10/20 5406 182 ** ** 1800 12 - 7,9 310 2340 190 2/5/10/20 5406 222 ** ** 2200 12 - 7,9 280 3320 185 2/5/10/20 5406 272 ** ** 2700 12 - 7,9 260 4000 180 2/5/10/20 - 22 - Keramik / Ceramic Qmin Ferrit / Ferrite L EW Artikel-Nr. Electrical Parameters Size 0603 / Series 5406 wire-wound: N N EW Ferrit / Ferrite Keramik / Ceramic Elektrische Eigenschaften Baugroe 0603 / Baureihe 5406 drahtgewickelt: Gute Q uber Frequenz f Q factor versus frequency f Induktivitat L uber Frequenz f Inductance L versus frequency f Spule auf Keramikkorper Coil on ceramic body Spule auf Ferritkorper Coil on ferrite body 10000 L [nH] Q[] 20 2700 nH 15 1800nH 1000 nH 820 nH 10 1000 nH 1000 820 nH 680 nH 1800 nH 680 nH 2700 nH 5 100 0 1 10 100 1 1000 f [MHz ] - 23 - 10 100 1000 f [MHz ] Recommended Current-carrying capacity Iop/IR, 85 C depending on the ambient temperature Ta Empfohlene Strombelastbarkeit IB/IN, 85 C in Abhangigkeit von der Umgebungstemperatur Ta 1,2 Keramik Ceramic 1 IB /I N 0,8 Ferrit Ferrite 0,6 0,4 0,2 0 0 20 40 60 80 T a [C ] - 24 - 100 120 140