TH97/10561QM IATF 0060636 SGS TH07/1033 SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR SMB (DO-214AA) VBR : 6.8 - 440 Volts PPK : 600 Watts 5.4 0.2 2.0 0.1 FEATURES : * 600W surge capability at 1ms * Excellent clamping capability * Low zener impedance * Fast response time : typically less then 1.0 ps from 0 volt to VBR(min.) * Typical IR less then 1A above 10V * Pb / RoHS Free 1.1 0.3 4.8 0.15 P6SMB6.8CA - P6SMB440CA TW00/17276EM 0.22 0.07 2.3 0.2 3.6 0.15 Dimensions in millimeters MECHANICAL DATA * Case : SMB Molded plastic * Epoxy : UL94V-O rate flame retardant * Lead : Lead Formed for Surface Mount * Polarity : Color band denotes cathode end except Bipolar. * Mounting position : Any * Weight : 0.093 grams DEVICES FOR UNIPOLAR APPLICATIONS For uni-directional without "C" Electrical characteristics apply in both directions MAXIMUM RATINGS Rating at 25 C ambient temperature unless otherwise specified. Rating Symbol Value Unit Peak Power Dissipation at Ta = 25C, Tp=1ms (Note1) PPK Minimum 600 Watts Steady State Power Dissipation at TL = 75 C PD 5.0 Watts IFSM 100 Amps. TJ, TSTG - 55 to + 150 C Peak Forward Surge Current, 8.3ms Single Half Sine-Wave Superimposed on Rated Load (JEDEC Method) (Note 3) Operating and Storage Temperature Range Notes: (1) Non-repetitive Current pulse, per Fig. 5 and derated above Ta = 25 C per Fig. 1 (2) Mounted on copper Lead area at 5.0 mm 2 ( 0.013 mm thick ). (3) 8.3 ms single half sine-wave, duty cycle = 4 pulses per Minutes maximum. Page 1 of 3 Rev. 05 : March 31, 2008 TH97/10561QM ELECTRICAL CHARACTERISTICS IATF 0060636 SGS TH07/1033 (Rating at 25C ambient temperature unless otherwise specified) Breakdown Voltage @ It Working Peak Maximum Maximum Maximum Maximum ( Note 1 ) Reverse Reverse Leakage Reverse Clamping Temperature Co-efficient Type No. VBR (V) Min. Max. Voltage @ VRWM Current Voltage @ IRSM It VRWM IR IRSM VRSM of VBR (mA) (V) (A) (A) (V) (% / C) 57.0 53.0 50.0 45.0 41.0 38.0 36.0 33.0 28.0 27.0 24.0 22.0 20.0 18.0 16.0 14.4 13.2 12.0 11.2 10.1 9.3 8.6 7.8 7.1 6.5 5.8 5.3 4.8 4.4 4.0 3.6 3.3 2.9 2.7 2.6 2.4 2.2 1.83 1.75 1.45 1.25 1.10 1.00 10.5 11.3 12.1 13.4 14.5 15.6 16.7 18.2 21.2 22.5 25.2 27.7 30.6 33.2 37.5 41.4 45.7 49.9 53.9 59.3 64.8 70.1 77.0 85.0 92.0 103 113 125 137 152 165 179 207 219 234 246 274 328 344 414 482 548 602 0.057 0.061 0.065 0.068 0.073 0.075 0.078 0.081 0.084 0.086 0.088 0.090 0.092 0.094 0.096 0.097 0.098 0.099 0.100 0.101 0.101 0.102 0.103 0.104 0.104 0.105 0.105 0.106 0.106 0.107 0.107 0.107 0.108 0.108 0.108 0.108 0.108 0.108 0.110 0.110 0.110 0.110 0.110 P6SMB6.8CA 6.45 7.14 10 5.80 2000 P6SMB7.5CA 7.13 7.88 10 6.40 1000 P6SMB8.2CA 7.79 8.61 10 7.02 400 P6SMB9.1CA 8.65 9.55 1.0 7.78 100 P6SMB10CA 9.50 10.5 1.0 8.55 20 P6SMB11CA 10.5 11.6 1.0 9.40 5.0 P6SMB12CA 11.4 12.6 1.0 10.2 5.0 P6SMB13CA 12.4 13.7 1.0 11.1 5.0 P6SMB15CA 14.3 15.8 1.0 12.8 5.0 P6SMB16CA 15.2 16.8 1.0 13.6 5.0 P6SMB18CA 17.1 18.9 1.0 15.3 5.0 P6SMB20CA 19.0 21.0 1.0 17.1 5.0 P6SMB22CA 20.9 23.1 1.0 18.8 5.0 P6SMB24CA 22.8 25.2 1.0 20.5 5.0 P6SMB27CA 25.7 28.4 1.0 23.1 5.0 P6SMB30CA 28.5 31.5 1.0 25.6 5.0 P6SMB33CA 31.4 34.7 1.0 28.2 5.0 P6SMB36CA 34.2 37.8 1.0 30.8 5.0 P6SMB39CA 37.1 41.0 1.0 33.3 5.0 P6SMB43CA 40.9 45.2 1.0 36.8 5.0 P6SMB47CA 44.7 49.4 1.0 40.2 5.0 P6SMB51CA 48.5 53.6 1.0 43.6 5.0 P6SMB56CA 53.2 58.8 1.0 47.8 5.0 P6SMB62CA 58.9 65.1 1.0 53.0 5.0 P6SMB68CA 64.6 71.4 1.0 58.1 5.0 P6SMB75CA 71.3 78.8 1.0 64.1 5.0 P6SMB82CA 77.9 86.1 1.0 70.1 5.0 P6SMB91CA 86.5 95.5 1.0 77.8 5.0 P6SMB100CA 95.0 105 1.0 85.5 5.0 P6SMB110CA 105 116 1.0 94.0 5.0 P6SMB120CA 114 126 1.0 102 5.0 P6SMB130CA 124 137 1.0 111 5.0 P6SMB150CA 143 158 1.0 128 5.0 P6SMB160CA 152 168 1.0 136 5.0 P6SMB170CA 162 179 1.0 145 5.0 P6SMB180CA 171 189 1.0 154 5.0 P6SMB200CA 190 210 1.0 171 5.0 P6SMB220CA 209 231 1.0 185 5.0 P6SMB250CA 237 263 1.0 214 5.0 P6SMB300CA 285 315 1.0 256 5.0 P6SMB350CA 332 368 1.0 300 5.0 P6SMB400CA 380 420 1.0 342 5.0 P6SMB440CA 418 462 1.0 376 5.0 Notes: ( 1 ) VBR measured after It applied for 300 s., It = square wave pulse or equivalent. ( 2 ) "P6SMB" will be omitted in marking on the diode. Page 2 of 3 TW00/17276EM Rev. 05 : March 31, 2008 TH97/10561QM TW00/17276EM IATF 0060636 SGS TH07/1033 RATING AND CHARACTERISTIC CURVES ( P6SMB SERIES ) FIG.1 - PULSE DERATING CURVE FIG.2 - MAXIMUM NON-REPETITIVE SURGE CURRENT 120 PEAK FORWARD SURGE CURRENT, AMPERES PEAK PULSE DERATING IN % OF PEAK POWER OR CURRENT 120 100 80 60 40 20 0 0 25 50 75 100 125 150 100 80 60 40 20 8.3 ms SINGLE HALF SINE WAVE JEDEC METHOD 0 175 1 6 10 20 40 60 100 NUMBER OF CYCLES AT 60Hz FIG.3 - STEADY STATE POWER DERATING FIG.4 - PULSE RATING CURVE 100 Pp,PEAK POWER (kW) 5.00 PD, STEADY STATE POWER DISSIPATION (WATTS) 4 2 Ta, AMBIENT TEMPERATURE, ( C) 3.75 2.50 1.25 Single Phase Half Wave 60 Hz Resistive or Inductive load 10 1.0 0.1 0.1s 1.0s 10s 100s 1.0ms 10ms 0 0 25 50 75 100 125 150 175 200 tp, PULSE WIDTH TL, LEAD TEMPERATURE (C) PEAK PULSE CURRENT - % IRMS FIG.5 - PULSE WAVEFORM Tr = 10s 100 Peak Value IRMS T J=25 C Pulse Width (tp) is defined as that point where the peak current decays to 50% of IRSM Half Value - I RMS 2 50 10X1000 Waveform as defined by R.E.A. tp 0 0 1.0 2.0 3.0 4.0 T, TIME(ms) Page 3 of 3 Rev. 05 : March 31, 2008