1181-800-526-2324 • www.us.tdk-lambda.com/lp/ Disclaimer: us.tdk-lambda.com/lp/legal.htm
PFE300-1000 Series
Features
u Low profi le, small size
u 100°C baseplate temperature
u High power density
u High Effi ciency
u Suitable for conduction cooling
u Power Factor Corrected (PFC)
300 to 1008W AC-DC Power Module
Notes: (Consult Installation Manual for detailed specifi cations, test methods and application notes)
1) External components are required, consult Application Notes
2) PFE500S-12, PFE500F-12: -40 to 85°C. See instruction manuals for derating curves
PFE1000F28 & PFE1000F48: -40 to 85°C below 170VAC input voltage.
See instruction manuals for derating curves
3) PFE500F, PFE1000F: 500VDC Output to baseplate
4) Reduced PFC above 63Hz. Contact technical support for 440Hz operation.
PFE300S PFE700S PFE500F PFE1000F
Model PFE500S
AC Input VAC 85 to 265VAC, 47-63Hz (up to 440Hz) (4)
Input Current (100 / 220VAC) A 4.0 / 2.0 8.8 / 4.4 6.8 / 3.4 13.6 / 6.6
Model dependant 6.2 / 3.2
Inrush Current (100 /200VAC) (1) A 20 / 40 peak
Power Factor - 0.95 minimum, meets EN61000-3-2
Output Voltage Setpoint Accuracy - ±2% ±1V ±2% ±2%
Ripple and Noise (1) - 1% 4V 1% 1%
Over Current Protection % 105 - 140% (Automatic Recovery) 105 - 140%
Manual reset
Over Voltage Protection - 125 - 145% 60 - 69.6V 125 - 145% 125 - 145%
Series Operation - Yes
Parallel Operation - No Yes (Droop mode) Yes (Single wire) Yes (Single wire)
Power On Signal (ENA) - Open collector (10mA sink current). Low (on) when output is present
Auxiliary Supply - None None 10 - 14V, 20mA 10 - 14V, 20mA
Remote On/Off (Opto isolated) - None None High = On High = On
Overtemperature Protection - Yes
Operating Baseplate Temp. °C -40 to +100°C (2)
Storage Temperature °C -40 to +100°C
Humidity (non condensing) - Operating: 20 - 95%RH, Non Operating: 10 - 95%RH
Cooling - Conduction
Withstand Voltage (1 min) (3) - Input to Output 3kVAC, Input to Baseplate 2.5kVAC, Output to Baseplate 1.5kVDC
Isolation Resistance - Output to baseplate: 100M Ohm at 500VDC, 25°C ambient, 70%RH
Vibration (non operating) - 10-55Hz (1 min sweep), constant amplitude 0.825mm (max 49m/s2), X, Y, Z 1 hour each
Shock - 196.1m/s2
Safety Certifi cations - UL60950-1, CSA60950-1 (cUL), EN60950-1, CE mark (LVD)
Weight g 250 250 300 500
Size (WxHxL) mm 61 x 12.7 x 116.8mm 70 x 12.7 x 122mm 100 x 13.4 x 160mm
in 2.4 x 0.5 x 4.6” 2.76 x 0.5 x 4.8” 3.94 x 0.53 x 6.3”
Warranty yrs 2 years
Specifi cations
Key Market Segments & Applications