)SUNON [seecrricarion FOR avrovat CUSTOMER DESCRIPTION : DC BRUSHLESS FAN DIMENSIONS : 60X60X15 mm MODEL + KDE1206PHS2 APPROVED NO APPROVED BY (AUTHORZIED) SPEC.NO D600052 ISSUE DATE 1|08.07.1998 pawn. | ## 9/7 |CHKD. leo EDITION 0 : REVISE DATE E.SPEC ED60083 Soe eT BRA A] SUNONWEALTH ELECTRIC MACHINE INDUSTRY CO., LTD. 12FL., 120 CHUNG CHENG IST RD., TEL:886-7-7163069(41 LINES) KAOHSIUNG, TAIWAN, R.O.C. #7 FAX:886-7-7163086~89SUNON DC BRUSHLESS FAN MODEL: KDE1206PHS2 | CHARACTERISTICS | 1. Motor Design : Patented single-coil DC brushless 4 poles motor Design. 2. Insulation Resistance : More than 500M ohm between internal stator and lead wire(+) measured by DC 500V. 3. Dielectric Strength : Applied AC 500V for one minute or AC 600V for ~ 2 seconds between housing and lead wire(+) 4. Noise Level : Measured in an semi-anechoic chamber with background noise level below 15 dB(A). The fan is running in free air with Microphone at a distance of one meter from the fan intake. 5. Input power, Current & Speed : Measured after continuous 30 minutes Operation at rated voltage in clean air at ambient temperature of 25 degrees C. 6. Tolerances : 15% on rated power and current. 7. Motor Protection : Polarity protected & Locked rotor protected. 8. Air Performance : Measured by a double chamber. The value are recorded when the fan speed is stabilized at rated voltage. Se mS Bt pa spo? a Save ee TERA A] SPEC.NO D600052 REVISE GATE] e048 SUNONWEALTH ELECTRIC ISSUE DATE |08. 07.1998 |E DIT IYO Nr O.. of MACHINE INDUSTRY CO.,LTD.[ PAGE 2 OF 6 AS oeSUNON SPECIFICATIONS MODEL: KDE1206PHS2 1-1. Rated Voltage 1-2. Operating Voltage Range 1-3. Starting Voltage 1-4. Rated Speed 1-5. Air Delivery 1-6. Static Pressure 1-7. Rated Current 1-8. Rated Power 1-9. Noise Level 1-10. Direction of Rotation 1-11. Operating Temperature 1-12. Storage Temperature 1-13. Bearing System 1-14. Weight 1-15. Safety 1-16. Vibration 12 VDC 10.2-13.8 VDC 10 VDC 4000 RPM + 400 RPM 17.8 CFM 0.135 Inch-H20 0.16 AMP 19 WATTS 31 dB(A) Counter-clockwise viewed front fan blade -10 to +70 Deg.C -40 to +70 Deg.C Lubricated sleeve bearing system 45 UL/CSA/TUV Approvals Vibration of acceleration 1.5G and Frequency 5~50~5Hz is applied in the 3 directions(X,Y,Z) for 30 minutes, each " Direction at the cycle of 1 minute. BERR RHA al SUNONWEALTH ELECTRIC MACHINE INDUSTRY CO., LTD. SPEC.NO 600052 [REVISEAMTE | ISSUE DATE 108. 07.1998 JEDI 10 PAGE |} 3 OF 6 Hep mo Ta rr) eneSUNON MODEL : KDE1206PHS2 PERFORMANCE CURVES STATIC PRESSURE mm-H20 = Inch-H20 4 6 0.20 4 |. 0.10 9 CFM 0 0 0.28 0.56 | m/min _ oe ZMER LER OSRAT SPEC.NO _[D600052_ [REVISH DATE | 7 SUNONWEALTH ELECTRIC ISSUE DATE | 08. 07.1998 [E DI TA OF 1 / MACHINE INDUSTRY CO.,LTD.| PAGE 4 OF 6 NLSUNON | MATERIAL 2-1. Frame : Thermoplastic PBT of UL 94V-0 2-2. Impeller : Thermoplastic PBT of UL 94V-0 2-3. Bobbin : Thermoplastic PBT of UL 94V-0 2-4. Lead Wire : UL2468,26AWG,+RED;-BLACK {DIMENSIONS UL2468 #26AWG ROTATION #ReD, eack R FLOW oe $ po Air Flow Direction: Label side. 182 (Soe aR EMSRS OARAA SPEC.NO =| D600052 REVIS} SEDATE SUNONWEALTH ELECTRIC _ [ISSUE DATE [03.07.1998 |E D- MACHINE INDUSTRY CO.,LTD.[PaGE | 5 OF 6 ~~ 1SUNON [Notes | 1. SUNON will not guarantee the products if the application of our products is exceeded the limitation which is specified on this specification. 2. In case of change of the specification specified on this document, a written notice is requested in advance. 3. Please do not touch the impeller with pressure and never bring the fan with lead wire. The bearings and lead wire may be damaged. 4. No guarantee on the products against the safety problem or failure caused by powder dust, drop of water or insect. 5. If there is any data or related documentation different from this data sheet, this data sheet is the principal reference. . 6. For the purpose of MIS, please indicate SPEC No. on every order. 7. In case of the fan has no polarity protection function, wires with same color (electrode) must be connected together during the assembly. (i.e. red + red, black + black) or the fan will be damaged immediately. 8. Please do not use the fan in the environment of corrosive gas or liquid or any detrimental gas. 9, Please do not store the fan in the environment of high / low temperature, high humidity or any detrimental gas. Please store the fan within 6 months, every 6 months, there shall be a linkage of electric current to the fan, even though the fan is stored in room temperature. 10.While the fan is in operation, please do not lock the fan intentionally for a long period of time, since the continuous stoppage will result in over-heat and thus burn-out of the fan. 11.During the installation of the fan, please pay substantial attention to possible noise cause by resonance vibration and vibration. 12.During the testing of the fan, please be sure to use finger guard to insure safety. SeEA REARS al SPEC.NO [D600052 [REVISE DASE { SUNONWEALTH ELECTRIC ISSUE DATE | 08. 07.1998 JEDITHON]0. 05 MACHINE INDUSTRY CO.,LTD.[ PAGE | 6 OF 6 oh ZF } i -