© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com F3066_F622 • 9/22/2016 1
One world. One KEMET
Benets
• Voltage range: 50 – 630 VDC
• Capacitance range: 0.001 – 2.2 µF
• Lead spacing: 5 mm
• Capacitance tolerance: ±10%, ±20%, ±5% on request
• Climatic category: 55/125/56
• Tape and reel packaging in accordance with IEC 60286–2
• RoHS Compliant and lead-free terminations
• Operatingtemperaturerangeof-55˚Cto+125˚C
• Designed for high performance, high temperature
applications
Overview
The F622 Series is constructed of metallized stacked
polyesterlmcapacitorwithradialleadsoftinnedwire.
Radial leads are electrically welded to the contact metal
layer on the ends of the capacitor winding. The capacitor is
encapsulated in a self-extinguishing material meeting the
requirements of UL 94 V–0.
Applications
Typical applications include high performance, high
temperature blocking, coupling, decoupling, bypassing and
interference suppression in low voltage applications such as
automotive. Not for use with the mains.
General Purpose, Pulse and DC Transient Suppression
F622 Series Metallized Polyester Film,
5 mm Lead Spacing, 50 – 630 VDC
Part Number System
F622 J F 104 M050 C
Capacitor Class Series Lead Spacing
(mm) Size Code Capacitance
Code (pF)
Capacitance
Tolerance
Rated Voltage
(VDC) Packaging
F = Film Metallized
Polyester
J = 5 See Dimension
Table
First two digits
represent
signicant
gures.Third
digitspecies
number of
zeros.
J = ±5%
K = ±10%
M = ±20%
050 = 50
063 = 63
100 = 100
250 = 250
400 = 400
500 = 500
630 = 630
See Ordering
Options Table
Click image above for interactive 3D content
Open PDF in Adobe Reader for full functionality
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com F3066_F622 • 9/22/2016 2
Film Capacitors – General Purpose, Pulse and DC Transient Suppression
F622 Series Metallized Polyester Film, 5 mm Lead Spacing, 50 – 630 VDC
Ordering Options Table
Lead Spacing
Nominal
(mm)
Type of Leads and Packaging Lead Length
(mm)
Lead and
Packaging
Code
5
Standard Lead and Packaging Options
Bulk (Bag) – Short Leads
4+2/-0
C
Bulk (Bag) – Long Leads
17+0/-1
A
Tape & Reel (Standard Reel)
H0=18.5+/-0.5
L
Other Lead and Packaging Options
Bulk (Bag) – Max Length Leads 20+5/-0 ALL0L
Ammo Pack H
0
=18.5+/-0.5 R
Dimensions – Millimeters
H
p
LL
d
L B
FRONT VIEW SIDE VIEW
0.5
Size Code p B H L d
Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance
JF
5.0
+/-0.4
2.5
Maximum
6.5
Maximum
7.2
Maximum
0.5
+/-0.05
JG
5.0
+/-0.4
3.5
Maximum
7.5
Maximum
7.2
Maximum
0.5
+/-0.05
JM
5.0
+/-0.4
4.5
Maximum
9.5
Maximum
7.2
Maximum
0.5
+/-0.05
JQ
5.0
+/-0.4
5.0
Maximum
10.0
Maximum
7.2
Maximum
0.5
+/-0.05
JT
5.0
+/-0.4
6.0
Maximum
11.0
Maximum
7.2
Maximum
0.5
+/-0.05
Note: See Ordering Options Table for lead length (LL) options.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com F3066_F622 • 9/22/2016 3
Film Capacitors – General Purpose, Pulse and DC Transient Suppression
F622 Series Metallized Polyester Film, 5 mm Lead Spacing, 50 – 630 VDC
Performance Characteristics
Capacitance Tolerance ±20%, ±10%, ±5% on request
Category Temperature Range -55°C to 125°C
Voltage Derating Above+85°CDCandACvoltagederatingis1.25%/°C
Rated Temperature +85°C
Climatic Category
–55to+125°C
Averagerelativehumidity≤75%
RH = 95% for 30 days per year
RH = 85% for further days limited by average value per year
Test Voltage 1.6 x VR VDC for 2 seconds
Capacitance Drift
Reliability
Operational life > 200,000 hours
Failurerate<3FIT,T=+40°C,V=0.5xVR
Failurecriteria:opencircuit,shortcircuit,capchange>10%,DF2timesthecataloglimits,IR<50MΩ
Maximum Pulse Steepness dV/dt according to Table 1. For peak to peak voltages lower than rated voltage (Vpp < VR),thespecied
dV/dt can be multiplied by the factor V
/Vpp.
TemperatureCoefcient +400(±200)ppm/°Cat1kHz
Self Inductance Approximately 6 nH/cm for the total length of capacitor winding and the leads
DissipationFactortanδ
MaximumValuesat+23°C
C≤0.1µF 0.1µF<C≤1.0µF C > 1.0 µF
1 kHz 0.8% 0.8% 0.8%
10 kHz 1.2% 1.2% 1.5%
100 kHz 2.5%
Insulation Resistance
Measuredat+20°C,accordingtoIEC60384–2
Minimum Values Between Terminals
C≤0.33µF C > 0.33 µF and < 1 µF C > 1.0 µF
VR≤100VDC 15,000MΩ 5,000MΩ•µF 1,000MΩ•µF
VR > 100 VDC 30,000MΩ 10,000MΩ•µF
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com F3066_F622 • 9/22/2016 4
Film Capacitors – General Purpose, Pulse and DC Transient Suppression
F622 Series Metallized Polyester Film, 5 mm Lead Spacing, 50 – 630 VDC
Maximum Voltage (Vrms) vs. Frequency (Sinusoidal Waveform/T ≤ 40°C)
Lead Spacing 5 mm
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com F3066_F622 • 9/22/2016 5
Film Capacitors – General Purpose, Pulse and DC Transient Suppression
F622 Series Metallized Polyester Film, 5 mm Lead Spacing, 50 – 630 VDC
Maximum Current (Irms) vs. Frequency (Sinusoidal Waveform/T ≤ 40°C)
Lead Spacing 5 mm
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com F3066_F622 • 9/22/2016 6
Film Capacitors – General Purpose, Pulse and DC Transient Suppression
F622 Series Metallized Polyester Film, 5 mm Lead Spacing, 50 – 630 VDC
Environmental Test Data
Damp Heat Test Test Conditions T = +40°C, RH = 93%, t = 56 days
Test Criteria
ΔC/C≤±5%
Δtanδ≤0.005(1kHz)
IR after test 0.5 x IR minimum
Endurance Test Test Conditions T = +100°C, U = 1.25 x (0.8 x U
R
)
Test Criteria
t = 2,000 hours
ΔC/C≤±5%
Δtanδ≤0.005(1kHz)
Δtanδ≤0.010(100kHz)
IR after test 0.5 x IR minimum
Environmental Compliance
All KEMET MKT capacitors are RoHS Compliant and Halogen Free.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com F3066_F622 • 9/22/2016 7
Film Capacitors – General Purpose, Pulse and DC Transient Suppression
F622 Series Metallized Polyester Film, 5 mm Lead Spacing, 50 – 630 VDC
VDC VAC Capacitance
Value (µF)
Size
Code
Max Dimensions in mm Lead Spacing (p) dV/dt
(V/µs) Part Number
B H L
50 30 2.2 JT 6.0 11.0 7.2 5.0 200 F622JT225(1)050(2)
63 40 0.10 JF 2.5 6.5 7.2 5.0 250 F622JF104(1)063(2)
63 40 0.12 JF 2.5 6.5 7.2 5.0 250 F622JF124(1)063(2)
63 40 0.15 JF 2.5 6.5 7.2 5.0 250 F622JF154(1)063(2)
63 40 0.18 JF 2.5 6.5 7.2 5.0 250 F622JF184(1)063(2)
63 40 0.22 JF 2.5 6.5 7.2 5.0 250 F622JF224(1)063(2)
63 40 0.27 JG 3.5 7.5 7.2 5.0 250 F622JG274(1)063(2)
63 40 0.33 JG 3.5 7.5 7.2 5.0 250 F622JG334(1)063(2)
63 40 0.39 JG 3.5 7.5 7.2 5.0 250 F622JG394(1)063(2)
63 40 0.47 JG 3.5 7.5 7.2 5.0 250 F622JG474(1)063(2)
63 40 0.56 JM 4.5 9.5 7.2 5.0 250 F622JM564(1)063(2)
63 40 0.68 JM 4.5 9.5 7.2 5.0 250 F622JM684(1)063(2)
63 40 0.82 JM 4.5 9.5 7.2 5.0 250 F622JM824(1)063(2)
63 40 1.0 JQ 5.0 10.0 7.2 5.0 250 F622JQ105(1)063(2)
63 40 1.2 JT 6.0 11.0 7.2 5.0 250 F622JT125(1)063(2)
63 40 1.5 JT 6.0 11.0 7.2 5.0 250 F622JT155(1)063(2)
100 63 0.0047 JF 2.5 6.5 7.2 5.0 300 F622JF472(1)100(2)
100 63 0.0056 JF 2.5 6.5 7.2 5.0 300 F622JF562(1)100(2)
100 63 0.0068 JF 2.5 6.5 7.2 5.0 300 F622JF682(1)100(2)
100 63 0.0082 JF 2.5 6.5 7.2 5.0 300 F622JF822(1)100(2)
100 63 0.010 JF 2.5 6.5 7.2 5.0 300 F622JF103(1)100(2)
100 63 0.012 JF 2.5 6.5 7.2 5.0 300 F622JF123(1)100(2)
100 63 0.015 JF 2.5 6.5 7.2 5.0 300 F622JF153(1)100(2)
100 63 0.018 JF 2.5 6.5 7.2 5.0 300 F622JF183(1)100(2)
100 63 0.022 JF 2.5 6.5 7.2 5.0 300 F622JF223(1)100(2)
100 63 0.027 JF 2.5 6.5 7.2 5.0 300 F622JF273(1)100(2)
100 63 0.033 JF 2.5 6.5 7.2 5.0 300 F622JF333(1)100(2)
100 63 0.039 JF 2.5 6.5 7.2 5.0 300 F622JF393(1)100(2)
100 63 0.047 JF 2.5 6.5 7.2 5.0 300 F622JF473(1)100(2)
100 63 0.056 JF 2.5 6.5 7.2 5.0 300 F622JF563(1)100(2)
100 63 0.068 JF 2.5 6.5 7.2 5.0 300 F622JF683(1)100(2)
100 63 0.082 JG 3.5 7.5 7.2 5.0 300 F622JG823(1)100(2)
100 63 0.10 JG 3.5 7.5 7.2 5.0 300 F622JG104(1)100(2)
100 63 0.12 JM 4.5 9.5 7.2 5.0 300 F622JM124(1)100(2)
100 63 0.15 JM 4.5 9.5 7.2 5.0 300 F622JM154(1)100(2)
100 63 0.18 JM 4.5 9.5 7.2 5.0 300 F622JM184(1)100(2)
100 63 0.22 JQ 5.0 10.0 7.2 5.0 300 F622JQ224(1)100(2)
100 63 0.27 JT 6.0 11.0 7.2 5.0 300 F622JT274(1)100(2)
100 63 0.33 JT 6.0 11.0 7.2 5.0 300 F622JT334(1)100(2)
100 63 0.39 JT 6.0 11.0 7.2 5.0 300 F622JT394(1)100(2)
100 63 0.47 JT 6.0 11.0 7.2 5.0 300 F622JT474(1)100(2)
250 160 0.0010 JF 2.5 6.5 7.2 5.0 400 F622JF102(1)250(2)
250 160 0.0012 JF 2.5 6.5 7.2 5.0 400 F622JF122(1)250(2)
250 160 0.0015 JF 2.5 6.5 7.2 5.0 400 F622JF152(1)250(2)
250 160 0.0018 JF 2.5 6.5 7.2 5.0 400 F622JF182(1)250(2)
250 160 0.0022 JF 2.5 6.5 7.2 5.0 400 F622JF222(1)250(2)
250 160 0.0027 JF 2.5 6.5 7.2 5.0 400 F622JF272(1)250(2)
250 160 0.0033 JF 2.5 6.5 7.2 5.0 400 F622JF332(1)250(2)
250 160 0.0039 JF 2.5 6.5 7.2 5.0 400 F622JF392(1)250(2)
250 160 0.0047 JF 2.5 6.5 7.2 5.0 400 F622JF472(1)250(2)
250 160 0.0056 JF 2.5 6.5 7.2 5.0 400 F622JF562(1)250(2)
250 160 0.0068 JF 2.5 6.5 7.2 5.0 400 F622JF682(1)250(2)
250 160 0.082 JF 2.5 6.5 7.2 5.0 400 F622JF823(1)250(2)
250 160 0.010 JF 2.5 6.5 7.2 5.0 400 F622JF103(1)250(2)
250 160 0.012 JF 2.5 6.5 7.2 5.0 400 F622JF123(1)250(2)
250 160 0.015 JF 2.5 6.5 7.2 5.0 400 F622JF153(1)250(2)
250 160 0.018 JF 2.5 6.5 7.2 5.0 400 F622JF183(1)250(2)
250 160 0.022 JG 3.5 7.5 7.2 5.0 400 F622JG223(1)250(2)
250 160 0.027 JG 3.5 7.5 7.2 5.0 400 F622JG273(1)250(2)
VDC VAC Capacitance
Value (µF)
Size
Code B (mm) H (mm) L (mm) Lead Spacing (p) dV/dt (V/µs) Part Number
Table 1 – Ratings & Part Number Reference
(1) K = ±10%, M = ±20%, J = ±5% on request.
(2) Insert lead and packaging code. See table for available options.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com F3066_F622 • 9/22/2016 8
Film Capacitors – General Purpose, Pulse and DC Transient Suppression
F622 Series Metallized Polyester Film, 5 mm Lead Spacing, 50 – 630 VDC
VDC VAC Capacitance
Value (µF)
Size
Code
Max Dimensions in mm Lead Spacing (p) dV/dt
(V/µs) Part Number
B H L
250 160 0.033 JG 3.5 7.5 7.2 5.0 400 F622JG333(1)250(2)
250 160 0.039 JG 3.5 7.5 7.2 5.0 400 F622JG393(1)250(2)
250 160 0.047 JM 4.5 9.5 7.2 5.0 400 F622JM473(1)250(2)
250 160 0.056 JM 4.5 9.5 7.2 5.0 400 F622JM563(1)250(2)
250 160 0.068 JM 4.5 9.5 7.2 5.0 400 F622JM683(1)250(2)
250 160 0.082 JM 4.5 9.5 7.2 5.0 400 F622JM823(1)250(2)
250 160 0.10 JQ 5.0 10.0 7.2 5.0 400 F622JQ104(1)250(2)
250 160 0.12 JT 6.0 11.0 7.2 5.0 400 F622JT124(1)250(2)
250 160 0.15 JT 6.0 11.0 7.2 5.0 400 F622JT154(1)250(2)
400 200 0.0010 JF 2.5 6.5 7.2 5.0 600 F622JF102(1)400(2)
400 200 0.0012 JF 2.5 6.5 7.2 5.0 600 F622JF122(1)400(2)
400 200 0.0015 JF 2.5 6.5 7.2 5.0 600 F622JF152(1)400(2)
400 200 0.0018 JF 2.5 6.5 7.2 5.0 600 F622JF182(1)400(2)
400 200 0.0022 JF 2.5 6.5 7.2 5.0 600 F622JF222(1)400(2)
400 200 0.0027 JF 2.5 6.5 7.2 5.0 600 F622JF272(1)400(2)
400 200 0.0033 JF 2.5 6.5 7.2 5.0 600 F622JF332(1)400(2)
400 200 0.0039 JF 2.5 6.5 7.2 5.0 600 F622JF392(1)400(2)
400 200 0.0047 JF 2.5 6.5 7.2 5.0 600 F622JF472(1)400(2)
400 200 0.0056 JG 3.5 7.5 7.2 5.0 600 F622JG562(1)400(2)
400 200 0.0068 JG 3.5 7.5 7.2 5.0 600 F622JG682(1)400(2)
400 200 0.0082 JG 3.5 7.5 7.2 5.0 600 F622JG822(1)400(2)
400 200 0.010 JG 3.5 7.5 7.2 5.0 600 F622JG103(1)400(2)
400 200 0.012 JG 3.5 7.5 7.2 5.0 600 F622JG123(1)400(2)
400 200 0.015 JG 3.5 7.5 7.2 5.0 600 F622JG153(1)400(2)
400 200 0.018 JM 4.5 9.5 7.2 5.0 600 F622JM183(1)400(2)
400 200 0.022 JM 4.5 9.5 7.2 5.0 600 F622JM223(1)400(2)
400 200 0.027 JM 4.5 9.5 7.2 5.0 600 F622JM273(1)400(2)
400 200 0.033 JQ 5.0 10.0 7.2 5.0 600 F622JQ333(1)400(2)
400 200 0.039 JQ 5.0 10.0 7.2 5.0 600 F622JQ393(1)400(2)
400 200 0.047 JT 6.0 11.0 7.2 5.0 600 F622JT473(1)400(2)
400 200 0.056 JT 6.0 11.0 7.2 5.0 600 F622JT563(1)400(2)
500 220 0.0010 JF 2.5 6.5 7.2 5.0 700 F622JF102(1)500(2)
500 220 0.0012 JF 2.5 6.5 7.2 5.0 700 F622JF122(1)500(2)
500 220 0.0015 JF 2.5 6.5 7.2 5.0 700 F622JF152(1)500(2)
500 220 0.0018 JF 2.5 6.5 7.2 5.0 700 F622JF182(1)500(2)
500 220 0.0022 JG 3.5 7.5 7.2 5.0 700 F622JG222(1)500(2)
500 220 0.0027 JG 3.5 7.5 7.2 5.0 700 F622JG272(1)500(2)
500 220 0.0033 JG 3.5 7.5 7.2 5.0 700 F622JG332(1)500(2)
500 220 0.0039 JG 3.5 7.5 7.2 5.0 700 F622JG392(1)500(2)
500 220 0.0047 JG 3.5 7.5 7.2 5.0 700 F622JG472(1)500(2)
500 220 0.0056 JM 4.5 9.5 7.2 5.0 700 F622JM562(1)500(2)
500 220 0.0068 JM 4.5 9.5 7.2 5.0 700 F622JM682(1)500(2)
500 220 0.0082 JM 4.5 9.5 7.2 5.0 700 F622JM822(1)500(2)
500 220 0.010 JQ 5.0 10.0 7.2 5.0 700 F622JQ103(1)500(2)
500 220 0.012 JT 6.0 11.0 7.2 5.0 700 F622JT123(1)500(2)
500 220 0.015 JT 6.0 11.0 7.2 5.0 700 F622JT153(1)500(2)
630 220 0.0010 JF 2.5 6.5 7.2 5.0 800 F622JF102(1)630(2)
630 220 0.0012 JF 2.5 6.5 7.2 5.0 800 F622JF122(1)630(2)
630 220 0.0015 JG 3.5 7.5 7.2 5.0 800 F622JG152(1)630(2)
630 220 0.0018 JG 3.5 7.5 7.2 5.0 800 F622JG182(1)630(2)
630 220 0.0022 JG 3.5 7.5 7.2 5.0 800 F622JG222(1)630(2)
630 220 0.0027 JG 3.5 7.5 7.2 5.0 800 F622JG272(1)630(2)
630 220 0.0033 JM 4.5 9.5 7.2 5.0 800 F622JM332(1)630(2)
630 220 0.0039 JM 4.5 9.5 7.2 5.0 800 F622JM392(1)630(2)
630 220 0.0047 JM 4.5 9.5 7.2 5.0 800 F622JM472(1)630(2)
630 220 0.0056 JM 4.5 9.5 7.2 5.0 800 F622JM562(1)630(2)
630 220 0.0068 JQ 5.0 10.0 7.2 5.0 800 F622JQ682(1)630(2)
630 220 0.0082 JT 6.0 11 7.2 5.0 800 F622JT822(1)630(2)
630 220 0.010 JT 6.0 11 7.2 5.0 800 F622JT103(1)630(2)
VDC VAC Capacitance
Value (µF)
Size
Code B (mm) H (mm) L (mm) Lead Spacing (p) dV/dt (V/µs) Part Number
Table 1 – Ratings & Part Number Reference cont'd
(1) K = ±10%, M = ±20%, J = ±5% on request.
(2) Insert lead and packaging code. See table for available options.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com F3066_F622 • 9/22/2016 9
Film Capacitors – General Purpose, Pulse and DC Transient Suppression
F622 Series Metallized Polyester Film, 5 mm Lead Spacing, 50 – 630 VDC
Manual Soldering Recommendations
Following is the recommendation for manual
soldering with a soldering iron.
The soldering iron tip temperature should
besetat350°C(+10°Cmaximum)withthe
soldering duration not to exceed more than 3
seconds.
Recommended Soldering Temperature
0
50
100
150
200
250
300
350
400
012345678
Soldering time (sec)
Soldering iron bit temperature (deg C)
Soldering Process
The implementation of the RoHS directive has resulted in the selection of SnAgCu (SAC) alloys or SnCu alloys as primary solder.
This has increased the liquidus temperature from that of 183ºC for SnPb eutectic alloy to 217 – 221ºC for the new alloys. As a
result, the heat stress to the components, even in wave soldering, has increased considerably due to higher pre-heat and wave
temperatures. Polypropylene capacitors are especially sensitive to heat (the melting point of polypropylene is 160 – 170ºC). Wave
soldering can be destructive, especially for mechanically small polypropylene capacitors (with lead spacing of 5 mm to 15 mm),
andgreatcarehastobetakenduringsoldering.TherecommendedsolderprolesfromKEMETshouldbeused.Pleaseconsult
KEMET with any questions. In general, the wave soldering curve from IEC Publication 61760-1 Edition 2 serves as a solid guideline
for successful soldering. Please see Figure 1.
Reowsolderingisnotrecommendedforthrough-holelmcapacitors.Exposingcapacitorstoasolderingproleinexcessofthe
above the recommended limits may result to degradation or permanent damage to the capacitors.
Do not place the polypropylene capacitor through an adhesive curing oven to cure resin for surface mount components. Insert
through-holepartsafterthecuringofsurfacemountparts.ConsultKEMETtodiscusstheactualtemperatureproleintheoven,
if through-hole components must pass through the adhesive curing process. A maximum two soldering cycles is recommended.
Please allow time for the capacitor surface temperature to return to a normal temperature before the second soldering cycle.
Wave Soldering Recommendations
0
50
100
150
200
250
300
0
40
80
120
160
200
240
Temperature (°C)
Time (s)
ca 2°C/s
ca 3.5°C/s typical
ca 5°C/s
Cooling
2+3s max
115°C max
T
preh eat
ΔT <150°C
100°C
Preheating
Typical
First wave
Second wave
260°C
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com F3066_F622 • 9/22/2016 10
Film Capacitors – General Purpose, Pulse and DC Transient Suppression
F622 Series Metallized Polyester Film, 5 mm Lead Spacing, 50 – 630 VDC
Soldering Process cont'd
Wave Soldering Recommendations cont'd
1. The table indicates the maximum set-up temperature of the soldering process
Figure 1
Dielectric
Film Material
Maximum Preheat
Temperature
Maximum
Peak Soldering
Temperature
Capacitor
Pitch
≤10mm
Capacitor
Pitch
= 15 mm
Capacitor
Pitch
> 15 mm
Capacitor
Pitch
≤15mm
Capacitor
Pitch
> 15 mm
Polyester 130°C 130°C 130°C 270°C 270°C
Polypropylene 100°C 110°C 130°C 260°C 270°C
Paper 130°C 130°C 140°C 270°C 270°C
Polyphenylene
Sulphide 150°C 150°C 160°C 270°C 270°C
2. The maximum temperature measured inside the capacitor:
Set the temperature so that inside the element the maximum temperature is below the limit:
Dielectric Film Material Maximum temperature
measured inside the element
Polyester 160°C
Polypropylene 110°C
Paper 160°C
Polyphenylene
sulphide
160°C
Temperature monitored inside the capacitor.
Selective Soldering Recommendations
Selectivedipsolderingisavariationofreowsoldering.Inthismethod,theprintedcircuitboardwiththrough-hole
componentstobesolderedispreheatedandtransportedoverthesolderbathasinnormalowsolderingwithouttouching
the solder. When the board is over the bath, it is stopped and pre-designed solder pots are lifted from the bath with molten
solder only at the places of the selected components, and pressed against the lower surface of the board to solder the
components.
Thetemperatureproleforselectivesolderingissimilartothedoublewaveowsolderingoutlinedinthisdocument,
however, instead of two baths, there is only one bath with a time from 3 to 10 seconds. In selective soldering, the risk of
overheatingisgreaterthanindoublewaveowsoldering,andgreatcaremustbetakensothatthepartsarenotoverheated.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com F3066_F622 • 9/22/2016 11
Film Capacitors – General Purpose, Pulse and DC Transient Suppression
F622 Series Metallized Polyester Film, 5 mm Lead Spacing, 50 – 630 VDC
Construction
Molded Plastic
Case
Leads
Metal Contact
Layer
Metal Contact
Layer
Margin
Single-sided Metallized
Polyester Film
(Second Layer)
Single-sided Metallized
Polyester Film
(First Layer)
Detailed Cross Section
Self-Extinguish-
ing Resin
Molded Plastic
Case
Stacked
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com F3066_F622 • 9/22/2016 12
Film Capacitors – General Purpose, Pulse and DC Transient Suppression
F622 Series Metallized Polyester Film, 5 mm Lead Spacing, 50 – 630 VDC
Marking
TOPFRONT
Capacitance Capacitance
Tolerance
Series
Voltage
Code
KEMET
Logo
Manufacturing
Date Code
Packaging Quantities
Size Code Lead Spacing Thickness
(mm)
Height
(mm) Length (mm) Bulk
Short Leads
Bulk
Long Leads
Standard Reel
ø 355 mm Ammo
JF
5
2.5
6.5
7.2
3000
4000
2500
3500
JG
3.5
7.5
7.2
2000
3000
1800
2500
JM
4.5
9.5
7.2
1500
2000
1400
1900
JQ
5.0
10.0
7.2
1000
1500
1200
1700
JT
6
11
7.2
2000
1000
1000
1400
JU
7.2
13
7.2
1500
750
800
1150
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com F3066_F622 • 9/22/2016 13
Film Capacitors – General Purpose, Pulse and DC Transient Suppression
F622 Series Metallized Polyester Film, 5 mm Lead Spacing, 50 – 630 VDC
Lead Taping & Packaging (IEC 60286–2)
Taping Speci cation
Dimensions in mm Standard IEC 60286–2
Lead spacing +6/- 0.1 F 5 7.5 10 15 22.5 27.5 F
Carrier tape width +1/-0.5 W18 18 18 18 18 18 18+1/-0.5
Hold-down tape width Minimum W
0
66910 10 10
Position of sprocket hole +/-0.5 W
1
999999 9+0.75/-0.5
Distance between tapes Maximum W
2
333333 3
Sprocket hole diameter +/-0.2 D
0
444444 4
Feed hole lead spacing +/-0.2(1) P
0
(3) 12.7 12.7 12.7 12.7 12.7 12.7 12.7
Distance lead – feed hole +/-0.7 P
1
3.85 3.75 7.7 5.2 7.8 5.3 P1
Deviation tape – plane Maximum Δp 1.3 1.3 1.3 1.3 1.3 1.3 1.3
Lateral deviation +/-2 Δh 222222 2
Total thickness +/-0.2 t0.7 0.7 0.7 0.7 0.9MAX 0.9MAX 0.9MAX
Sprocket hole/cap body +/-0.5 H
0
(2) 18.5+/-0.5 18.5+/-0.5 18.5+/-0.5 18.5+/-0.5 18.5+/-0.5 18.5+/-0.5 18+2/-0
(1) Maximum cumulative feed hole error, 1 mm per 20 parts.
(2) 16.5 mm available on request.
(3) 15 mm available on request (F ≥ 10 mm).
Lead Spacing 5 mm
Lead Spacing 7.5 mm
Lead Spacing 10 – 15 mm
Lead Spacing 22.5 – 27.5 mm
0
0
0
0
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com F3066_F622 • 9/22/2016 14
Film Capacitors – General Purpose, Pulse and DC Transient Suppression
F622 Series Metallized Polyester Film, 5 mm Lead Spacing, 50 – 630 VDC
H
T
W
Lead Taping & Packaging (IEC 60286–2) cont'd
Ammo Speci cations
Series Dimensions (mm)
HW T
R4x,R4x+R,R7x,RSB
360 340 59
F5A, F5B, F5D
F6xx, F8xx
PHExxx, PMExxx, PMRxxx
330
330
50
Reel Speci cations
Series Dimensions (mm)
DHW
R4x,R4x+R,R7x,RSB
355
500
30
25 55 (Max)
F5A, F5B, F5D
F6xx, F8xx
PHExxx, PMExxx, PMRxxx
360
500
30 46 (Max)
Manufacturing Date Code (IEC–60062)
Y = Year, Z = Month
Year
Code
Month
Code
2000
M
January
1
2001
N
February
2
2002
P
March
3
2003
R
April
4
2004
S
May
5
2005
T
June
6
2006
U
July
7
2007
V
August
8
2008
W
September
9
2009
X
October
O
2010
A
November
N
2011
B
December
D
2012
C
2013
D
2014
E
2015
F
2016
H
2017
J
2018
K
2019
L
2020
M
D
W
H
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com F3066_F622 • 9/22/2016 15
Film Capacitors – General Purpose, Pulse and DC Transient Suppression
F622 Series Metallized Polyester Film, 5 mm Lead Spacing, 50 – 630 VDC
KEMET Electronic Corporation Sales Of ces
Foracompletelistofourglobalsalesofces,pleasevisitwww.kemet.com/sales.
Disclaimer
Allproductspecications,statements,informationanddata(collectively,the“Information”)inthisdatasheetaresubjecttochange.Thecustomerisresponsiblefor
checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed.
All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
StatementsofsuitabilityforcertainapplicationsarebasedonKEMETElectronicsCorporation’s(“KEMET”)knowledgeoftypicaloperatingconditionsforsuch
applications,butarenotintendedtoconstitute–andKEMETspecicallydisclaims–anywarrantyconcerningsuitabilityforaspeciccustomerapplicationoruse.
The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any
technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no
obligation or liability for the advice given or results obtained.
Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component
failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards
(suchasinstallationofprotectivecircuitryorredundancies)inordertoensurethatthefailureofanelectricalcomponentdoesnotresultinariskofpersonalinjuryor
property damage.
Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other
measures may not be required.
KEMET is a registered trademark of KEMET Electronics Corporation.