S P E C I A L P U R P O S E 450/512 MHz Rugged Low Profile Silhouette Antenna Unity Gain Models ASP-572 Series ASP-772 Series Rugged high impact molded ASA radome defies damage or vandalism Performance vertically polarized omnidirectional radiation pattern for excellent communications High Technology evolved from aviation antenna designs requiring long, reliable performance Broadband no tuning required across specified frequency ranges Electrical Frequency Range Gain VSWR Power Bandwidth Impedance Pattern Mechanical Antenna Material Radome Material Cable Connector Height Length Width Mounting Hardware Specifications See table below Unity 1.5:1 100 Watts 14 MHz minimum 50 ohms Omnidirectional when roof mounted; ground plane dependent Brass rod White high impact molded ASA Not furnished (see SYSTEM ACCESSORIES - CABLES & KITS section) See table below 3.13 inches (8.6 cm) 8 inches (20.3 cm) 3.5 inches (8.9 cm) Supplied with four stainless steel truss head slotted bolts (No. 10) and four selftapping sheet metal screws, and a 1/8 inch (3.2 mm) thickness of rubber mounting pad (non-interconnecting cellular neoprene) Available Model Configurations Connector Frequency UHF Female (SO-239) BNC Female 450-470 MHz ASP-572 ASP-772 470-488 MHz ASPB572 ASPB772 488-512 MHz ASPC572 ASPC772 ASP-572 Low profile, special environment communications antenna for transit buses, police cars and vans, as well as fire fighting apparatuses, railroad equipment, airport service vehicles and construction equipment. See page 42 for K-305P cable option 20 ft (6.1 m) RG-58/U cable with a BNC male connector on one end and a UHF male (PL-259) loose. w w w . a n t e n n a . c o m 25 (R)Stripes of Quality