C2D10120A VRRM VRRM== 1200 1200 V V Silicon Carbide Schottky Diode Zero R ecovery(R) Rectifier Features * * * * * * * IF (TC=135C) = 14.5 A IF = 10 A Qc 61 nC Qc == 61 nC Package 1.2kV Schottky Rectifier Zero Reverse Recovery Current Zero Forward Recovery Voltage High-Frequency Operation Temperature-Independent Switching Behavior Extremely Fast Switching Positive Temperature Coefficient on VF TO-220-2 Benefits * * * * * Replace Bipolar with Unipolar Rectifiers Essentially No Switching Losses Higher Efficiency Reduction of Heat Sink Requirements Parallel Devices Without Thermal Runaway PIN 1 CASE PIN 2 Applications * * * Switch Mode Power Supplies Power Factor Correction Motor Drives Part Number Package Marking C2D10120A TO-220-2 C2D10120 Maximum Ratings (TC=25C unless otherwise specified) Symbol Parameter Test Conditions VRRM Repetitive Peak Reverse Voltage 1200 V VRSM Surge Peak Reverse Voltage 1200 V VDC DC Blocking Voltage 1200 V Continuous Forward Current 31 14.5 10 A TC=25C TC=135C TC=152C 50 A TC=25C, tP=10 ms, Half Sine Wave IF IFRM Repetitive Peak Forward Surge Current IFSM Non-Repetitive Peak Forward Surge Current 250 A TC=25C, tP=10 s, Pulse Ptot Power Dissipation 312 135 W TC=25C TC=110C -55 to +175 C 1 8.8 Nm lbf-in TJ , Tstg Operating Junction and Storage Temperature TO-220 Mounting Torque 1 Value Unit C2D10120 Rev. F M3 Screw 6-32 Screw Note Electrical Characteristics Symbol Parameter Typ. Max. Unit Test Conditions VF Forward Voltage 1.6 2.5 1.8 3.0 V IR Reverse Current 10 20 200 1000 A VR = 1200 V TJ=25C VR = 1200 V TJ=150C QC Total Capacitive Charge 61 nC VR = 1200 V, IF = 10 A di/dt = 500 A/s TJ = 25C C Total Capacitance 1000 80 59 pF VR = 0 V, TJ = 25C, f = 1 MHz VR = 200 V, TJ = 25C, f = 1 MHz VR = 400 V, TJ = 25C, f = 1 MHz Note IF = 10 A TJ=25C IF = 10 A TJ=175C Note: 1. This is a majority carrier diode, so there is no reverse recovery charge. Thermal Characteristics Symbol Parameter Typ. Unit RJC Thermal Resistance from Junction to Case 0.48 C/W 20 200 18 180 16 160 14 140 IR Reverse Current (A) IF Forward Current (A) Typical Performance 12 10 8 6 100 80 60 4 40 2 20 0 0 1.0 2.0 3.0 4.0 VF Forward Voltage (V) Figure 1. Forward Characteristics 2 120 C2D10120 Rev. F 5.0 0 0 500 1000 1500 VR Reverse Voltage (V) Figure 2. Reverse Characteristics 2000 C2D10120 Typical Performance 100 100.0 350 325 90.0 90 300 60.0 60 50 50.0 PTot (W) 70.0 70 275 Duty* Duty* Duty* Duty* Duty* Power Dissipation (W) 10% 20% 30% 50% 70% DC (A) Current Forward IIF(PEAK) Peak (A) Current Forward 40 40.0 30 30.0 F(AVG) 20 20.0 250 225 200 175 150 125 100 75 50 10 10.0 25 0 0.0 25 25 50 50 75 75 100 100 125 125 150 150 0 175 175 25 50 Case Temperature(C) TC Case Temperature 75 100 125 Tc Case Temperature (C) TC C * Frequency > 1KHz Figure 3. Current Derating Figure 4. Power Derating Page 1 800 700 600 C Capacitance (pF) Peak Forward Current 80 80.0 500 400 300 200 100 0 1 10 100 VR Reverse Voltage (V) Figure 5. Capacitance vs. Reverse Voltage 3 C2D10120 Rev. F 1000 150 175 Figure 6. Transient Thermal Impedance 4 C2D10120 Rev. F Package Dimensions POS Package TO-220-2 A J C P F Q B D X S E Y 1 2 G Z T U H V L M W N Inches Millimeters Min Max Min Max A .381 .410 9.677 10.414 B .235 .255 5.969 6.477 .120 2.540 M illim eters M in M5.664 ax .337 3.048 C P OS D A E B F C GD .395 .410 .590 .235 .255 .143 .102 .112 1.105 .337 .337 10.033 .615 5.969 .153 2.591 1.147 8.560 10.414 14.986 6.477 3.632 2.845 28.067 8.560 HE .590.500 .610 .550 14.986 12.700 15.494 L F G M H N J P L .149.025 .153 1.127 1.147 .045 .530 .550 .195 R 0.010 .028.165 .036 3.785 3.886 .036 .635 28.626 29.134 .055 1.143 13.462 13.970 .205 4.953 R 0.254 .185 4.191 .711 .914 QM .045.048 .055 1.143 .054 S N P T Q US .195 3 .205 .170 .180 V T WU V X W Y X zY .100 Inc hes M in.223 M ax .048 3 3 3 3.094 .054 5 5 3.014 5 .100 .110 3 .014 .021 .385 3 5 .395.130 .410 4.953 6 4.318 6 1.219 63 1.397 1.219 5.207 3 4.572 3 1.371 53 .110 3 3 .025 2.54 5.5 .356 .410 3 .150 10.033 2.388 5 5 .356 2.794 3 .533 9.779 5 3.302 10.414 8.560 15.621 3.886 29.134 13.970 .914 1.397 5.207 4.699 1.372 6 6 6 2.794 .635 5.5 10.414 3.810 .130 .150 3.302 3.810 NOTE:Z 1. Dimension L, M, W apply for Solder Dip Finish Recommended Solder Pad Layout TO-220-2 Part Number Package Marking C2D10120A TO-220-2 C2D10120 Note: Recommended soldering profiles can be found in the applications note here: http://www.cree.com/power_app_notes/soldering 5 C2D10120 Rev. F Notes * RoHS Compliance The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product Documentation sections of www.cree.com. * REACh Compliance REACh substances of high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA) has published notice of their intent to frequently revise the SVHC listing for the foreseeable future,please contact a Cree representative to insure you get the most up-to-date REACh SVHC Declaration. REACh banned substance information (REACh Article 67) is also available upon request. * This product has not been designed or tested for use in, and is not intended for use in, applications implanted into the human body nor in applications in which failure of the product could lead to death, personal injury or property damage, including but not limited to equipment used in the operation of nuclear facilities, life-support machines, cardiac defibrillators or similar emergency medical equipment, aircraft navigation or communication or control systems, air traffic control systems, or weapons systems. Copyright (c) 2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo, and Zero Recovery are registered trademarks of Cree, Inc. 6 C2D10120 Rev. F Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5451 www.cree.com/power Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Cree, Inc.: C2D10120A