MCC TM Micro Commercial Components DR750 THRU DR7510 omponents 20736 Marilla Street Chatsworth !"# $ % !"# Features * * * * * * * Low Cost and Low Leakage High Current Capability High Surge Current Capability Halogen free available upon request by adding suffix "-HF" Lead Free Finish/RoHS Compliant(Note 1) ("P" Suffix designates RoHS Compliant. See ordering information) Epoxy meets UL 94 V-0 flammability rating Moisture Sensitivity Level 1 * * * Operating Temperature: -50C to +150C Storage Temperature: -50C to +150C Maximum Thermal Resistance; 10 C/W Junction To Ambient 6 Amp Glass Passivated Rectifier 50 - 1000 Volts Maximum Ratings MCC Catalog Number Device Marking DR750 DR751 DR752 DR754 DR756 DR758 DR7510 DR750 DR751 DR752 DR754 DR756 DR758 DR7510 Maximum Recurrent Peak Reverse Voltage 50V 100V 200V 400V 600V 800V 1000V Maximum RMS Voltage 35V 70V 140V 280V 420V 560V 700V R-6 Maximum DC Blocking Voltage D 50V 100V 200V 400V 600V 800V 1000V A Cathode Mark B D Electrical Characteristics @ 25C Unless Otherwise Specified Average Forward IF(AV) 6.0A TA = 60C Current Peak Forward Surge IFSM 200A 8.3ms, half sine Current Maximum 1.1V IFM = 6.0A; Instantaneous VF Forward Voltage TJ = 25C* Maximum DC Reverse Current At IR 10A TJ = 25C Rated DC Blocking 1mA TJ = 100C Voltage Typical Junction CJ 100pF Measured at Capacitance 1.0MHz, VR=4.0V *Pulse test: Pulse width 300 sec, Duty cycle 1% C DIMENSIONS DIM A B C D INCHES MIN MAX .340 .360 .340 .360 .048 .052 1.000 --- MM MIN 8.60 8.60 1.20 25.40 MAX 9.10 9.10 1.30 --- NOTE Notes: 1. High Temperature Solder Exemption Applied, see EU Directive Annex Notes 7. Revision: B www.mccsemi.com 1 of 4 2013/01/01 MCC TM DR750 thru DR7510 Micro Commercial Components Figure 2 Forward Derating Curve Figure 1 Typical Forward Characteristics 200 6 100 5 60 PC BOARD 4 40 20 3 Amps Amps 10 2 6 PC BOARD 4 1 Single Phase, Half Wave 60Hz Resistive or Inductive Load 2 25C 0 1 50 0 75 100 125 150 175 .6 C .4 Average Forward Rectified Current - Amperesversus Ambient Temperature - C .2 .1 .6 .8 1.0 1.2 1.6 1.4 Volts Instantaneous Forward Current - Amperesversus Instantaneous Forward Voltage - Volts Figure 3 Typical Thermal Resistance versus Lead Length 20 15 C/W 10 5 0 .1 .2 .3 .4 .5 .6 .7 .8 .9 1.0 1.1 Inches Thermal Resistance - C/W versus Equal Lead Length To Heat Sink - Inches Revision: B www.mccsemi.com 2 of 4 2013/01/01 MCC DR750 thru DR7510 Figure 4 Typical Reverse Characteristics TM Micro Commercial Components Figure 5 Maximum Non-Repetitive Forward Surge Current 100 300 60 40 250 20 200 10 150 6 Amps 4 100 50 5 0 2 TJ=100C Amps 1 1 2 4 6 .6 8 10 20 40 60 80 100 Cycles .4 Peak Forward Surge Current - Amperesversus Number Of Cycles At 60Hz - Cycles .2 .1 .06 .04 .02 .01 TJ=25C 20 40 60 80 100 120 140 Volts Instantaneous Reverse Leakage Current - MicroAmperesversus Percent Of Rated Peak Reverse Voltage - Volts Revision: B www.mccsemi.com 3 of 4 2013/01/01 MCC TM Micro Commercial Components Ordering Information : Device Packing Part Number-TP Tape&Reel: 500pcs/Reel Part Number-AP Ammo Packing: 450pcs/Ammo Box Part Number-BP Bulk: 4.8Kpcs/Carton Note : Adding "-HF" suffix for halogen free, eg. Part Number-TP-HF ***IMPORTANT NOTICE*** Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. www.mccsemi.com Revision: B 4 of 4 2013/01/01 3