40 Industrial Way East, Eatontown , NJ 07724 [USA]
Phone: (732) 460-0212, Fax: (732) 460-0214
www.aeroflex.com/acc, email: acc-sales@aeroflex.com
Parameter Specification Units
Frequency Range 0.01 – 0.1 GHz
Insertion Loss (max) 1.0 dB
VSWR (max) 50 ohms 1.5 ratio
Isolation (min) 75 dB
Switching Speed (max) 250 nsec
CW RF Power, Operating (max) 1 W
Specifications:
Features:
• Incorporated TTL-compatible driver for
convenient system integration and operates
from +5V and -15V DC power supplies.
• DC blocks at all RF ports.
• RRuggedized construction.
• RoHS-compliant versions available.
• Hermetic versions available.
Revision Date: 1/25/2011
S4H1R Pin Diode Switch
Single Pole, Four Throw
Reflective
Notes:
DC Bias: +5V +/-0.5V @ 160 mA max
(Standard) -15V +/-3V @ 50 mA max
DC Bias: +5V +/-0.5V @ 200 mA max
(-5 option) -5V +/-0.5V @ 60 mA max
DC Bias: +15V +/-3V @ 160 mA max
(-12 option) -15V +/-3V @ 50 mA max
Control: TTL 0 = Low Loss E1 controls J2 – J1
TTL 1 = Isolation E2 controls J3 – J1
E3 controls J4 – J1
E4 controls J5 – J1
Switching speed is defined as 50% TTL to 90% RF (t-on) and 50%
TTL to 10% RF (t-off).
Environmental Specifications:
MIL-E-5400, MIL-STD-202, MIL-E-16400
Operating Temp: -55 °C to +85 °C
Storage Temp: -65 °C to +125 °C
Humidity: MIL-STD-202F, M103, Cond B
Shock: MIL-STD-202F, M213, Cond B
Altitude: MIL-STD-202F, M105, Cond B
Vibration: MIL-STD-202F, M204, Cond B
Thermal Shock: MIL-STD-202F, M107, Cond A
Temperature Cycle: MIL-STD-202F, M105C, Cond D
Mechanical Specifications:
Case Styles: S4 Outline (Four bit control)
S4-2 Outline (Two bit control)
Finish: Gold Plate per MIL-G-45204
Bias & Control Pins: ø0.02” x 0.15” long
Weight: 60 g max
Mounting: ø0.10” through holes
(2) places
Two Bit Control:
(-2 option)
Screening:
Internal Visual per MIL-STD-883, Method 2017
Temperature Cycle: -65 °C to +100 °C, 10 cycles
Hermetically-sealed switches are fine and gross leak checked
per MIL-STD-883, Method 1014.
Optional High-Rel screening available upon request. Contact
the factory to discuss your screening requirements.
E2 E1 Low Loss Path
0 0 J2 - J1
0 1 J3 - J1
1 0 J4 - J1
1 1 J5 - J1
Aeroflex Control Components reserves the right to make changes to any products
and services herein at any time without notice. Consult Aeroflex or an authorized
sales representative to verify that the information in this data sheet is current before
using this product. Aeroflex does not assume any responsibility or liability arising
out of the application or use of any product or service described herein, except as
expressly agreed to in writing by Aeroflex; nor does the purchase, lease, or use of a
product or service from Aeroflex convey a license under any patent rights, copyrights,
trademark rights, or any other of the intellectual rights of Aeroflex or of third parties.
Copyright 2011 Aeroflex Control Components. All rights reserved.
www.aeroex.com/Microwave www.aeroex.com/ACC
Aeroflex Control Components
Aeroflex Microelectronic Solutions
40 Industrial Way East
Eatontown , NJ 07724 [USA]
Fax: (732) 460-0214
Sales
Phone: (732) 460-0212
ACC-sales@aeroflex.com
ISO 9001:2008 certified
Our passion for performance is defined by three
attributes represented by these three icons:
solution-minded, performance-driven and customer-focused.
Revision Date: 1/25/2011
Outline Drawing:
OUTLINE CASE STYLE S4 OUTLINE CASE STYLE S4-2
1.50
0.75
7X
Ø0.020 X 0.15 LG
SOLDER PIN
0.38
REF.
1.50
0.75
0.07
1.360
0.28
0.560
0.31
TYP
2X
Ø0.100 THRU
MOUNTING HOLE
45°
A
A
B
B
0.15
T Y P.
0.15
(2) PLCS.
VIEW B-B
VIEW A-A
0.33
0.45
L
C0.08
(3) PLCS.
C
L
0.25
5X
SMA FEMALE
1.50
0.75
7X
Ø0.020 X 0.15 LG
SOLDER PIN
0.38
REF.
1.50
0.75
0.07
1.360
0.28
0.560
0.31
TYP
2X
Ø0.100 THRU
MOUNTING HOLE
45°
A
A
B
B
0.15
T Y P.
0.15
(2) PLCS.
VIEW B-B
VIEW A-A
0.33
0.45
L
C0.08
(3) PLCS.
C
L
0.25
5X
SMA FEMALE
J1
J2
J3 J4
J5
E1
E2
E4
E3
-V
G
+V
J1
J2
J3 J4
J5
E1
N/C
N/C
E2
-V
G
+V
ACC
SN:
0000
DC:
WWYY
ACC
SN:
0000
DC:
WWYY
MODEL NUMBER MODEL NUMBER
Part Number Ordering Information:
• Add “-RC” suffix: RoHS-compliant
• Add “-H” suffix: Hermetic seal
• Add “-5” suffix: +/-5V DC supplies
• Add “-5-RC” suffix: +/-5V DC supplies, RoHS-compliant
• Add “-5-H” suffix: +/-5V DC supplies, Hermetic seal
• Add “-12” suffix: +/-15V DC supplies
• Add “-12-RC” suffix: +/-15V DC supplies, RoHS-compliant
• Add “-12-H” suffix: +/-15V DC supplies, Hermetic seal
• Add “-2 suffix: Two bit logic control
• Add “-2-RC” suffix: Two bit logic control, RoHS-compliant
• Add “-2-H” suffix: Two bit logic control, Hermetic seal
• Add “-2-5” suffix: Two bit logic control, +/-5V DC supplies
• Add “-2-5-RC” suffix: Two bit logic control, +/-5V DC supplies,
RoHS-compliant
• Add “-2-5-H” suffix: Two bit logic control, +/-5V DC supplies,
Hermetic seal
• Add “-2-12” suffix: Two bit logic control, +/-15V DC supplies
• Add “-2-12-RC” suffix: Two bit logic control, +/-15V DC
supplies, RoHS-compliant
• Add “-2-12-H” suffix: Two bit logic control, +/-15V DC supplies,
Hermetic seal