3.2x1.6 mm SMD CHIP LED LAMP PRELIMINARY SPEC Part Number: APK3216RWC/A-F01 ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES WHITE Description The source color devices are made with InGaN on SiC Light Emitting Diode. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. Features All devices, equipment and machinery must be electrically 3.2mmx1.6mm SMT LED, 1.1mm THICKNESS. grounded. LOW POWER CONSUMPTION. WIDE VIEWING ANGLE. IDEAL FOR BACK LIGHT AND INDICATOR. VARIOUS COLORS AND LENS TYPES AVAILABLE. Applications traffic signaling. PACKAGE : 2000PCS / REEL. backlighting (illuminated advertising , general lighting). MOISTURE SENSITIVITY LEVEL : LEVEL 4. interior and exterior automotive lighting. ELECTROSTATIC DISCHARGE THRESHOLD (HBM):1000V. substitution of micro incandescent lamps. TYP. COLOR TEMPERATURE:6500K reading lamps. COLOR COORDINATES:X=0.31,Y=0.31 ACC. TO signal and symbol luminaire for orientation. CIE1931(WHITE). marker lights (e.g. steps, exit ways, etc). OPTICAL EFFICIENCY:10.5 lm/W(TYP.) decorative and entertainment lighting. COLOR REPRODUCTION INDEX:80 indoor and outdoor commercial and residential RoHS COMPLIANT. architectural lighting. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.2(0.008") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAH3761 REV NO: V.1 DATE: APR/26/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 1 OF 7 ERP: 1204000604 Selection Guide Note2 Dice Part No. APK3216RWC/A-F01 luminous Intensity Iv(mcd) @ 20 mA Lens Type WHITE (InGaN) Note3 v (mlm) @ 20 mA Viewing Note1 Angle Min. Typ. Typ. 21/2 70 200 700 90 WATER CLEAR Absolute Maximum Ratings at TA=25C Parameter Symbol Value Unit Power dissipation Pt 120 mW Reverse Voltage VR 5 V Junction temperature TJ 110 C Operating Temperature Top -40 To +85 C Storage Temperature Tstg -40 To +100 C IF 30 mA IFM 100 mA Rth JA Rth JS 300 120 C/W C/W DC Forward Current Peak Forward Current Note4 Thermal resistance Note5 Junction/ambient Junction/solder point Notes: 1.1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2.Luminous intensity is measured by a current pulse of 10ms at a tolerance of 15%. 3.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the typical data. For the purpose of product enhancement, the typical data is subject to change without prior notice. 4.1/10 Duty Cycle, 0.1ms Pulse Width. 5.Rth(J-A) Results from mounting on PC board FR4 (pad size16 mm 2 per pad), Electrical / Optical Characteristics at TA=25C Parameter Symbol Chromaticity coordinate x acc.to CIE1931 IF=20mA [Typ.] X Chromaticity coordinate y acc.to CIE1931 IF=20mA [Typ.] Y Value Unit Note1 0.31 - Note1 0.31 - Forward Voltage IF=20mA [Min.] Forward Voltage IF=20mA [Typ.] Forward Voltage 2.7 VF Note2 IF=20mA [Max.] Reverse Current (VR=5V) 3.2 4.0 [Typ.] 0.01 IR Reverse Current (VR=5V) V [Max.] 10 A Temperature coefficient of x [Typ.] IF=20mA, -10C T 100C TC x -0.1 10-3 / C Temperature coefficient of y [Typ.] IF=20mA, -10C T 100C TCy -0.2 10-3 / C Temperature coefficient of VF IF=20mA, -10C T 100C [Typ.] TCV -2.5 mV/ C Notes: 1.Chromaticity coordinates are measured by a current pulse of 20ms with a tolerance of 0.01 in X and Y color coordinates. 2.Forward voltage is measured with a current pulse of 10ms at a tolerance of 0.1V. SPEC NO: DSAH3761 REV NO: V.1 DATE: APR/26/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 2 OF 7 ERP: 1204000604 Brightness codes Note1 Note2 luminous Intensity Iv(mcd) @ 20 mA v(mlm) @ 20 mA Code. Min. Max. Typ. M 70 130 300 N 110 220 480 P 180 320 710 Q 280 420 960 Notes: 1.Luminous intensity is measured by a current pulse of 10ms at a tolerance of 15%. 2.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the typical data. For the purpose of product enhancement, the typical data is subject to change without prior notice. White APK3216RWC/A-F01 SPEC NO: DSAH3761 REV NO: V.1 DATE: APR/26/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 3 OF 7 ERP: 1204000604 APK3216RWC/A-F01 SPEC NO: DSAH3761 REV NO: V.1 DATE: APR/26/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 4 OF 7 ERP: 1204000604 APK3216RWC/A-F01 White CIE 0.44 0.42 0.40 c1 0.38 0.36 b4 0.34 b1 b3 0.32 c0 b2 0.30 a1 0.28 a0 0.26 0.24 0.22 0.22 0.24 0.26 0.28 0.30 0.32 0.34 0.36 0.38 0.40 0.42 0.44 a0 a1 X 0.264 0.283 0.296 0.280 X 0.248 0.275 0.283 0.264 Y 0.267 0.305 0.276 0.248 Y 0.286 0.321 0.305 0.267 Reference CCT: 14000~9000k Reference CCT: 14000~9000k b1 b2 X 0.283 0.330 0.330 0.287 X 0.287 0.330 0.330 0.296 Y 0.305 0.360 0.339 0.295 Y 0.295 0.339 0.318 0.276 Reference CCT: 9000~5600k Reference CCT: 9000~5600k b3 b4 X 0.275 0.298 0.306 0.283 X 0.298 0.321 0.330 0.306 Y 0.321 0.350 0.332 0.305 Y 0.350 0.379 0.360 0.332 Reference CCT: 9000~7000k Reference CCT: 7600~5600k c0 c1 X 0.330 0.361 0.356 0.330 X 0.321 0.366 0.361 0.330 Y 0.360 0.385 0.351 0.318 Y 0.379 0.419 0.385 0.360 Reference CCT: 5600~4600k Reference CCT: 6000~4600k SPEC NO: DSAH3761 REV NO: V.1 DATE: APR/26/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 5 OF 7 ERP: 1204000604 APK3216RWC/A-F01 Recommended Soldering Pattern (Units : mm; Tolerance: 0.1) Tape Specifications (Units : mm) Reel Dimension SPEC NO: DSAH3761 REV NO: V.1 DATE: APR/26/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 6 OF 7 ERP: 1204000604 PACKING & LABEL SPECIFCATIONS APK3216RWC/A-F01 SPEC NO: DSAH3761 REV NO: V.1 DATE: APR/26/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 7 OF 7 ERP: 1204000604