Stecker nach IEC 60130-9, IP 40, abgewinkelt, mit Schraub-
verschluss, Massekontakt, Knickschutztülle und Lötanschlüs-
sen
1. Temperaturbereich -40 °C/+85 °C
2. Werkstoffe
Kontaktträger PA GF
Kontaktstift 3- bis 8-polig CuZn, versilbert und flashvergoldet
Kontaktstift 12-polig CuZn, unternickelt und vergoldet
Erdungsfahne CuZn, unternickelt und verzinnt
Gehäuse PC
Rändelschraube CuZn, vernickelt
Knickschutztülle TPE
Zugentlastung Stahl, vernickelt
Hülse Stahl, verzinkt
Schraube Edelstahl/Stahl, chromatiert
3. Mechanische Daten
Kontaktierung mit Kupplungen 032098, 032099, KFR,
KFV, KGR, KGV, KV, WKV
Schutzart1
IP 40
Weiteres siehe Tabelle
4. Elektrische Daten
Weiteres siehe Tabelle
1nach DIN EN 60529,
nur in verschraubtem Zustand mit einem dazugehörigen Gegen
stück
2nach VDE 0110/IEC 60664
WSV
*a 12-polige Ausführung Ø 1,0 mm
12 pole version Ø 1.0 mm
version à 12 pôles Ø 1,0 mm
WSV 30 WSV 40 WSV 50 WSV 50/6 WSV 60 WSV 70 WSV 71 WSV 80 WSV 81 WSV 120
Polbilder, von der Lötseite gesehen
Pin configurations, solder side view
Schémas de raccordement, vus du côté à souder
www.lumberg.com 12/2009
Rundsteckverbinder mit Schraubverschluss nach IEC 60130-9, IP 40
Circular connectors with threaded joint acc. to IEC 60130-9, IP 40
Connecteurs circulaires avec verrouillage à vis suivant CEI 60130-9, IP 40
Rundsteckverbinder mit Schraubverschluss nach IEC 60130-9, IP 40
Circular connectors with threaded joint acc. to IEC 60130-9, IP 40
Connecteurs circulaires avec verrouillage à vis suivant CEI 60130-9, IP 40
03 03
Verpackung: im Karton
Packaging: in a cardboard box
Emballage: dans un carton
Plug acc. to IEC 60130-9, IP 40, angular, with threaded joint,
ground contact, bend protection and solder terminals
1. Temperature range -40 °C/+85 °C
2. Materials
Insulating body PA GF
Contact pin 3 to 8 poles CuZn, silvered and flash gilded
Contact pin 12 poles CuZn, pre-nickeled and gilded
Grounding spring CuZn, pre-nickeled and tinned
Housing PC
Knurled screw CuZn, nickeled
Bend protection TPE
Strain relief steel, nickeled
Sleeve steel, zinced
Screw stainless steel/steel, chromated
3. Mechanical data
Mating with sockets 032098, 032099, KFR, KFV,
KGR, KGV, KV, WKV
Protection1IP 40
For further information see table
4. Electrical data
For further information see table
1according to DIN EN 60529,
only in locked position with a proper counterpart
2according to VDE 0110/IEC 60664
WSV WSV
Bestellbezeichnung
Designation
Désignation
Polzahl
Poles
Pôles
Verpackungseinheit (VE)
Package unit (PU)
Unité d’emballage (UE)
Anschlussquerschnitt
Wire section
Section de racc. de fil
Kabeldurchmesser
Cable diameter
Diamètre de cable
Bemessungsstrom
Rated current
Courant assigné
Bemessungsspannung2
Rated voltage2
Tension assignée2
Prüfspannung
Test voltage
Tension d’éssai
Isolationswiderstand
Insulation resistance
Résistance d’isolement
Kontaktkapazität
Contact capacitance
Capacité de
contact
mm2mm A V AC kV AC eff.
Ω
pF
WSV 30 3 50 0,75 6 5 250 2 1013 ~ 2
WSV 40 4 50 0,75 6 5 250 2 1013 ~ 2
WSV 50 5 50 0,75 6 5 60 1 1012 ~ 3
WSV 50/6 5 50 0,75 6 5 250 2 1013 ~ 2
WSV 60 6 50 0,75 6 5 250 2 1013 ~ 2
WSV 70 7 50 0,75 6 5 250 2 1013 ~ 2
WSV 71 7 50 0,75 6 5 60 1 1012 ~ 3
WSV 80 8 50 0,75 6 5 60 1 1012 ~ 3
WSV 81 8 50 0,75 6 5 60 1 1012 ~ 3
WSV 120 12 50 0,25 6 3 60 1 1012 ~ 3
Connecteur mâle suivant CEI 60130-9, IP 40, angulaire, avec
verrouillage à vis, contact de masse, protecteur contre pliage
et connexion par soudure
1. Température d’utilisation -40 °C/+85 °C
2. Matériaux
Corps isolant PA GF
Contact à broche 3 à 8 pôles CuZn, argenté et doré flash
Contact à broche 12 pôles CuZn, sous-nickelé et doré
Ressort de terre CuZn, sous-nickelé et étamé
Boîtier PC
Vis moletée CuZn, nickelé
Protection contre pliage TPE
Décharge de traction acier, nickeled
Douille acier, zingué
Vis acier inoxydable/acier, chromaté
3. Caractéristiques mécaniques
Raccordement avec connecteurs femelles 032098,
032099, KFR, KFV, KGR, KGV, KV,
WKV
Protection1IP 40
Pour plus de détails, voir tableau
4. Caractéristiques électriques
Pour plus de détails, voir tableau
1suivant DIN EN 60529,
uniquement à l’état verrouillé avec un propre pendant
2suivant VDE 0110/CEI 60664
www.lumberg.com 12/2009