EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Infrared Remote-control Receiver Module IRM-26xxA SERIES Features : * Photo detector and preamplifier in one package * Internal filter for PCM frequency * Improved shielding against electrical field disturbance * TTL and CMOS compatibility * Output active low * Low power consumption * Improved immunity against ambient light * Pb free *The product itself will remain within RoHS compliant version. Descriptions The IRM-26xxA SERIES are miniaturized receivers for infrared remote control systems. PIN diode and preamplifier are assembled on lead frame, the epoxy package is designed as IR filter. The demodulated output signal can directly be decoded by a microprocessor. IRM-26xxA SERIES is the standard IR remote control receiver series, supporting all major transmission codes. Applications 1. Optical switch 2. Light detecting portion of remote control AV instruments such as Audio, TV, VCR, CD, MD, etc. Home appliances such as Air-conditioner, Fan , etc. The other equipments with wireless remote control. CATV set top boxes Multi-media Equipment PART MATERIAL COLOR Chip Silicon Black Compound Epoxy Black Everlight Electronics Co., Ltd. http:\\www.everlight.com Rev 2 Device NoDMO-026-310 Prepared date07-20-2005 Prepared by Page: 1 of 10 Carryll Hsu EVERLIGHT ELECTRONICS CO.,LTD. IRM-26xxA SERIES Package Dimensions OUT GND Vcc Notes: 1.All dimensions are in millimeters. 2.Tolerances unless dimensions 0.3mm. Available Types For Different Carrier Frequencies Type Carrier Frequencies(Typ) IRM-2633A 32.7 kHz IRM-2636A 36.7 kHz IRM-2638A 37.9 kHz IRM-2640A 40.0 kHz IRM-2656A 56.7 kHz Everlight Electronics Co., Ltd. http:\\www.everlight.com Rev 2 Device NoDMO-026-310 Prepared date07-20-2005 Prepared by Page: 2 of 10 Carryll Hsu EVERLIGHT ELECTRONICS CO.,LTD. IRM-26xxA SERIES Absolute Maximum Ratings (Ta=25) Parameter Symbol Rating Unit Supply Voltage Vcc 0~6 V Operating Temperature Topr -25 ~ +80 Storage Temperature Tstg -40 ~ +85 Soldering Temperature Tsol 260 Notice 4mm from mold body less than 10 seconds Recommended Operating Condition Supply Voltage Rating: Vcc 4.5V to 5.5V Electro-Optical Characteristics (Ta=25, and Vcc=5 V) Parameter Symbol MIN. TYP. MAX. Unit Condition Consumption Current Icc --- 1.1 2.5 mA No signal input Peak Wavelength p --- 940 --- nm L0 12 --- --- L45 6 --- --- Half Angle(Horizontal) h --- 45 --- deg Half Angle(Vertical) v --- 45 --- deg High Level Pulse Width TH 400 --- 800 s Low Level Pulse Width TL 400 --- 800 s High Level Output Voltage VH 4.5 --- --- V Low Level Output Voltage VL --- 0.2 0.5 V Reception Distance m At the ray axis *1 At the ray axis *2 *1:The ray receiving surface at a vertex and relation to the ray axis in the range of = 0 and =45. *2:A range from 30cm to the arrival distance. Average value of 50 pulses. Everlight Electronics Co., Ltd. http:\\www.everlight.com Rev 2 Device NoDMO-026-310 Prepared date07-20-2005 Prepared by Page: 3 of 10 Carryll Hsu EVERLIGHT ELECTRONICS CO.,LTD. IRM-26xxA SERIES Test Method The specified electro-optical characteristics is satisfied under the following Conditions at the controllable distance. cMeasurement place A place that is nothing of extreme light reflected in the room. dExternal light Project the light of ordinary white fluorescent lamps which are not high Frequency lamps and must be less then 10 Lux at the module surface. (Ee10Lux) eStandard transmitter A transmitter whose output is so adjusted as to Vo=400mVp-p and the output Wave form shown in Fig.-1.According to the measurement method shown in Fig.-2 the standard transmitter is specified. However , the infrared photodiode to be used for the transmitter should be p=940nm,=50nm. Also, photodiode is used of PD438B(Vr=5V). fMeasuring system According to the measuring system shown in Fig.-3 Fig.-1 Transmitter Wave Form D.U.T output Pulse Carrier frequency is adjusted to center frequency of each product. IR TANSMITTER OUTPUT WAVE FORM OUTPUT PULSE OF DEVICE Duty=0.5 Everlight Electronics Co., Ltd. http:\\www.everlight.com Rev 2 Device NoDMO-026-310 Prepared date07-20-2005 Prepared by Page: 4 of 10 Carryll Hsu EVERLIGHT ELECTRONICS CO.,LTD. IRM-26xxA SERIES Fig.-2 Measuring Method Fig.-3 Measuring System 20cm 10k +5.0 0.1V L: Transmission Distance Vcc OUT 10uF D.U.T Standard Transmitter Vout Standard Transmitter Vout 100k GND : Angle Of Horizontal & Vertical Direction Oscilloscope Block Diagram VCC Noise Det.& Gain Ctrl. IN I-V Converter &Input Bias Control Pre Amp AGC Amp Voltage Reference Circuit Band-pass Fiter Limit Amp Comparator Integrator &Wave Shaping Output Stage Fset Bias Circuit Frequency Setting Frequency Trimming Threshold Control Circuit GND Application Circuit RC Filter should be connected closely between Vcc pin and GND pin. Everlight Electronics Co., Ltd. http:\\www.everlight.com Rev 2 Device NoDMO-026-310 Prepared date07-20-2005 Prepared by Page: 5 of 10 Carryll Hsu OUT EVERLIGHT ELECTRONICS CO.,LTD. IRM-26xxA SERIES The Notice of Application: Transmission o remote control signal consist of four parts: Encode Part, IR Transmitter Source, IRM device, Decode Part 1. When IRM-26xxA code select frequency, it need to well understand the center system of encode part. 2. Strong or weak light of IR Transmitter can affect distance of transmission. 3. When using IRM-26xxA device, it requires the composition of code pattern to reach the demand as follows: Minimum Burst Length tburst (number of pulses per burst) : 10 cycles Minimum data pause time: Remocon TX code with Repeat key Remocon Tx code with Full frame Repeat Remocon TX repeat Code with minimum burst length Tactual , data = Tdata - (TBn - 150 s ) n Tactual , gap = Tgap - (TBn - 150 s ) Tgap 2.0 (Tr + 150 s ) n Tactual , gap 2.0 Tactual ,data 4. It needs to ensure the translation range of decode part if it is applied to the pulse-width range. If the above items hardly assure of its application, it'll cause NG(no good) message from the edge of signal. Everlight Electronics Co., Ltd. http:\\www.everlight.com Rev 2 Device NoDMO-026-310 Prepared date07-20-2005 Prepared by Page: 6 of 10 Carryll Hsu EVERLIGHT ELECTRONICS CO.,LTD. IRM-26xxA SERIES Typical Electro-Optical Characteristics Curves Fig.-4 Relative Spectral Sensitivity vs. Wavelength Fig.-5 Relative Transmission Distance vs. Direction Fig.-6 Arrival Distance vs. Ambient Temperature Fig.-7 Arrival Distance vs. Supply Voltage TWL ; Output Pulse Width (sec) TWL ; Output Pulse Width (sec) Fig.-8 Relative Transmission Distance vs. Center Carrier Frequency IRM-2656A IRM-2633A, 2636A, 2638A, 2640A Transmission Distance Lc (m) Transmission Distance Lc (m) Everlight Electronics Co., Ltd. http:\\www.everlight.com Rev 2 Device NoDMO-026-310 Prepared date07-20-2005 Prepared by Page: 7 of 10 Carryll Hsu EVERLIGHT ELECTRONICS CO.,LTD. IRM-26xxA SERIES Typical Electro-Optical Characteristics Curves Center Carrier Frequency (kHz) IRM-2638A Relative Transmission Distance (%) Relative Transmission Distance (%) Relative Transmission Distance (%) Fig.-9 Relative Transmission Distance vs. Center Carrier Frequency IRM-2633A IRM-2636A Center Carrier Frequency (kHz) Center Carrier Frequency (kHz) IRM-2656A Relative Transmission Distance (%) Relative Transmission Distance (%) IRM-2640A Center Carrier Frequency (kHz) Center Carrier Frequency (kHz) Everlight Electronics Co., Ltd. http:\\www.everlight.com Rev 2 Device NoDMO-026-310 Prepared date07-20-2005 Prepared by Page: 8 of 10 Carryll Hsu EVERLIGHT ELECTRONICS CO.,LTD. IRM-26xxA SERIES Reliability Test Item And Condition The reliability of products shall be satisfied with items listed below. Confidence level: 90% LTPD: 10% Test Items Test Conditions Failure Judgement Criteria Samples(n) Defective(c) 1 cycle Temperature cycle -40 +25 +85 (30min)(5min)(30min) 300 cycle test Temp: +85 High temperature test Vcc:5V 1000hrs Low temperature storage n=22,c=0 n=22,c=0 L0 Lx0.8 L45 Lx0.8 Temp: -40 1000hrs n=22,c=0 High temperature High humidity Ta: 85,RH: 85% 1000hrs Solder heat Temp: 2605 10sec 4mm From the bottom of the package. L: Lower specification limit n=22,c=0 n=22,c=0 Everlight Electronics Co., Ltd. http:\\www.everlight.com Rev 2 Device NoDMO-026-310 Prepared date07-20-2005 Prepared by Page: 9 of 10 Carryll Hsu EVERLIGHT ELECTRONICS CO.,LTD. IRM-26xxA SERIES Packing Quantity Specification 1. 1500PCS/1Box 2. 10Boxes/1Carton Label Form Specification PN: Customer's Production Number P/N : Production Number QTY: Packing Quantity CAT: Ranks HUE: Peak Wavelength REF: Reference LOT No: Lot Number MADE IN TAIWAN: Production Place RoHS IRM-2638A Notes 1. Above specification may be changed without notice. EVERLIGHT will reserve authority on material change for above specification. 2. When using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. 3. These specification sheets include materials protected under copyright of EVERLIGHT corporation. Please don't reproduce or cause anyone to reproduce them without EVERLIGHT's consent. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http:\\www.everlight.com Everlight Electronics Co., Ltd. http:\\www.everlight.com Rev 2 Device NoDMO-026-310 Prepared date07-20-2005 Prepared by Page: 10 of 10 Carryll Hsu Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Everlight: IRM2638 EL-IRM-2638V IRM-2633A IRM-2636A IRM-2636V IRM-2638A IRM-2638VF4 IRM-2638VS17 IRM2640A IRM-2640V