Ordering number:EN4243A P-Channel Silicon MOSFET 2SJ281 Ultrahigh-Speed Switching Applications Features Package Dimensions * Low ON resistance. * Ultrahigh-speed switching. * Low-voltage drive. unit:mm 2083B [2SJ281] 2.3 1.5 6.5 5.0 0.5 5.5 7.0 4 1.2 7.5 1.6 0.8 0.85 0.7 0.6 0.5 1 2 1 : Gate 2 : Drain 3 : Source SANYO : TP 3 2.3 2.3 unit:mm 2092B [2SJ281] 6.5 5.0 4 0.5 0.5 2.3 2 2.5 1 0.6 0.8 0.85 1.2 7.0 5.5 1.5 2.3 3 1.2 0 to 0.2 2.3 1 : Gate 2 : Drain 3 : Source SANYO : TP-FA Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 42899TH (KT)/O2093TH (KOTO) BX-0706 No.4243-1/4 2SJ281 Specifications Absolute Maximum Ratings at Ta = 25C Parameter Drain-to-Source Voltage Gate-to-Source Voltage Drain Current (DC) Symbol Conditions Ratings VDSS VGSS Drain Current (Pulse) ID IDP Allowable Power Dissipation PD Channel Temperature Storage Temperature PW10s, duty cycle1% Unit -250 V 30 V -3 A -12 A 1.0 W 30 W Tch 150 C Tstg -55 to +150 C Tc=25C Electrical Characteristics at Ta = 25C Parameter Drain-to-Source Breakdown Voltage Symbol Conditions V(BR)DSS V(BR)GSS ID=-1mA, VGS=0 IG=100A, VDS=0 Zero-Gate Voltage Drain Current IDSS Gate-to-Source Leakage Current IGSS VGS(off) VDS=-250V, VGS=0 VGS=25V, VDS=0 Gate-to-Source Breakdown Voltage Cutoff Voltage Forward Transfer Admittance Static Drain-to-Source ON-State Resistance | yfs | typ max -250 V 30 ID=-1mA -1.5 ID=-1.5A 1.5 Unit V -100 A 1 0 A -2.5 2.5 Output Capacitance Coss 100 pF Crss VDS=-20V, f=1MHz 40 pF Turn-ON Delay Time td(on) See specified Test Circuit 14 ns tr See specified Test Circuit 18 ns td(off) See specified Test Circuit 75 ns tf See specified Test Circuit 65 Turn-OFF Delay Time Fall Time Diode Forward Voltage VSD IS=-3A, VGS=0 2.0 Reverse Transfer Capacitance Rise Time 1.5 V S ID=-1.5A, VGS=-10V VDS=-20V, f=1MHz VDS=-20V, f=1MHz Input Capacitance RDS(on) Ciss VDS=-10V, VDS=-10V, Ratings min 420 -1.0 pF ns -1.5 V Switching Time Test Circuit No.4243-2/4 2SJ281 No.4243-3/4 2SJ281 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of April, 1999. Specifications and information herein are subject to change without notice. PS No.4243-4/4