Model and Suffix Code Calibrators Model and Suffix Code Name Model Suffix code CA11E CA12E Handy CAL -1 -2 Description voltage/current calibrator temperature calibrator With carrying case(B9108NK) With rubber boot(93038), strap(97040), accessory case(B9108XA) Temperature effect: 1/10 of accuracy/C; however, for 100-mV range, 0.005% + 10 V/C Handy Calibrators Accessory Features Name Temperature Calibrator Simulator of Common Thermocouples and RTD Sensors Model AC adapter Outputs a signal equivalent to signals of ten types of thermocouple K, E, J, T, N, S, B, L, M and R as well as Pt100 resistance temperature detector. Suitable for a broad range of applications such as maintenance of industrial process instruments and various thermometers. Description For 100 V For 120 V For 220-240 V A1020UP A1022UP B9108WB B9108WA Reference junction sensor Spare Parts Name Model Lead cables Lead cables Terminal adapter Carrying case Rubber boot Strap Accessory case Multi-range Thermometer Can be used as a multi-range thermometer. Three-wire RTD connection for an RTD is possible. Built-in Sensor for Reference Junction Compensation Reference junction compensation when generating a thermocouple signal can be performed by the built-in temperature sensor. For more precise compensation, use the external RJC sensor (model B9108WA, sold separately). / Description 1 pair(1 red and 1 black cables) for CA11E 1 pair(1 red and 2 black cables) for CA12E for CA12E This spare part is setting with suffix code 01 B9108MS B9108MT B9108KF B9108NK 93038 97040 B9108XA Voltage/Current Calibrator Temperature Calibrator This spare part is setting with suffix code 02 Both signal source and measurement functions Simple operation, easy to use Lightweight, compact body Specifications of Each Model CA11E Voltage/Current Calibrator Source Functions Shift Key Accuracy = (% of setting + value in mV, V, or A), at 23 5C for one year Range Selection Selects " temperature" or "RTD" unit. Range of Generated Signal Terminal Adapter Setting Resolution 0.05% + 20 mV 0.05% + 2 mV 0.05% + 2 mV *2 0.05% + 0.2 mV *2 0.05% + 50 V 0 to 30.00 V 0 to 11.000 V 1/2/3/4/5 V 0 to 1.1000 V 0.00 to 110.00 mV 0 to 24.000 mA 4/8/12/16/20 mA 24 V 0.1 to 24.000 mA 30 V 10 V 1-5 V 1V 100 mV 20 mA *1 4-20 mA *1 24 V (20 mA) *1 20 mASINK *1 Provides screw terminals for connecting a temperature sensor such as a thermocouple and RTD when measuring temperature. When generating an RTD signal, a three-wire RTD signal can be output using the lead cables that come with the CA12E by short-circuiting the Lo-Lo terminals using the shortcircuit bar that also comes with the CA12E. Accuracy 0.05% + 4 A 10% 0.1% + 4 A Temperature effect: 1/10 of accuracy/C; however, for 100-mV range, 0.005% + 10 V/C Short-circuit bar (CA12E) Lo Hi *2 When the load is 1 k or geater, and the error of the lead cables is excluded Addition of rubber boot as accessory Maximum load: 12 V Maximum curret: 22 mA Extemal power supply: 5 to 28 V Accuracy = (% of reading + value in the least significant digit), at 23 5C for one year Range Selection (When outputting a three-wire RTD signal) Remarks Maximum current: 1mA Maximum output current: 10 mA *1 The display resolution can select 24.000 or 24.00 displays with dip switch. Measurement Functions Example of Use of Terminal Adapter 10 mV 1 mV 1 V step 0.1 mV 10 V 1 A 4 mA step -- 1 A Display resolution for current 0.001mA (CA11E) Addition of loop check function (CA11E) Source/measurement of 10 kinds of thermocouples (CA12E) Indication Accuracy Resolution 30 V 0 to 30.00 V DC 0.05% + 2 digits 10 mV 10 V 0 to 11.000 V DC 0.05% + 2 digits 1 mV 1V 0 to 1100.0 mV 0.05% + 2 digits 0.1 mV 100 mV 0 to 110.00 mV DC 0.05% + 7 digits 0.01 mV 20 mA *1 0 to 24.000 mA DC 0.05% + 4 digit 0.001 mA Remarks Input impedance: Approx. 1 M Input impedance: Approx. 45 *1 The display resolution can select 24.000 or 24.00 displays with dip switch. CA12E Temperature Calibrator Plug for External RJC Sensor Source and Measurement Functions The RJC sensor is sold separately. Range Selection b B Plug for AC Adapter Common for all CA11E, CA12E A (Thermometer) Terminal adapter TC *1*4 Accuracy = (% of setting or reading + value in C), at 23 5C for one year Range of Generated Signal/Indication K E J T N R S -200.0 to 1372.0C -200.0 to 1000.0C -200.0 to 1200.0C -200.0 to 400.0C -200.0 to 1300.0C -328 to +2498F -328 to +1832F -328 to +2192F -328 to +752F -328 to +2372F 0 to 1768C +32 to +3214F B 600 to 1800C +1112 to +3272F L U -200 to 900C -328 to +1652F -200 to 400C -328 to +752F 0 to 110.00mV 100mV -200.0 to 850.0C -328 to +1562F RTD PT100 *2 *3 (-200.0 to 500.0C) (-328 to +932F) (JPT100) 0 to 400.0 400 Temperature effect: 1/10 of accuracy/C General/Common Specifications for CA11E/CA12E Power supply Life of Batteries Automatic Power-off : Four 1.5-V alkaline batteries (ANSI AA-size) or dedicated AC adapter (sold separately) : CA11E : Approximately 50 hours for 5 V DC output (with a load of 10k or greater) Approximately 25 hours for 20 mA DC output (with a load of 5 V) CA12E : Approximately 55 hours * When generating a signal continuously on alkaline batteries : Approximately 10 minutes (Can be canceled by DIP switch setting) : By four-digit up/down keys Generation Signal Level Setting Response of generator : CA11E : Approximately 1 second (from when the output begins to change until when the output level falls within the specified accuracy) CA12E (400 and RTD range) : Approximately 20 milliseconds (from when the specified current is applied until when the output level falls within the specified accuracy) Maximum Allowable : CA11E: 30 VDC or less between each terminal and ground CA12E: 42 V peak or less between each terminal and ground Applied Voltage Measurement display update interval Display Operating temperature/ humidity range Storage temperature/ humidity range Dimensions Weight Accessories : Approximately 1 update/sec. : 7 segments LCD : 0 to 50C and 20 to 85%RH (no condensation) *1 *2 *3 *4 Accuracy Source *4 0.05% + 1C (>-100C) 0.05% + 2C (-100C) Measurement *5 0.07% + 1.5C (>-100C) 0.07% + 2C (-100C) Remarks 0.1C or 1F 0.05% + 3C 0.05% + 2C 0.05% + 4C 0.05% + 3C 0.05% + 0.5C 0.05% + 1C 0.05% + 30 V (<100C) (100C) (<1000C) (1000C) (<0C) (0C) 0.07% + 3C 0.07% + 2C 0.07% + 4C 0.07% + 3C 0.07% + 1.5C 0.07% + 2C 0.05% + 30 V (<100C) (100C) 1C or 1F (<1000C) (1000C) (<0C) 0.1C or 1F (0C) 10 V 0.05% + 0.6C *6 0.05% + 0.6C *7 0.05% + 0.2 *6 0.05% + 0.2 *7 Based on the reference thermal EMF table of JIS C1602-1995 Based on the reference resistance table of JIS C1604-1997. Based on the international temperature standard 1990 (ITS-90). The accuracy for generation of thermocouple signals does not include the error of the reference junction compensation. When compensating the output using an RJC sensor, add the accuracy of the RJC sensor. The output compensation is performed every 4 seconds. RJC sensor specifications - measurement range: --10 to 50C; accuracy(in combination with the CA12E): 0.5C at 18 to 28C and 1C at other temperatures. 0.1C or 1F 0.1 *5 The accuracy for measurement of thermocouple signals indicates the error against the reference EMF table and includes the error of the internal reference junction compensation when the temperature at the terminals is stable. *6 External excitation current: 0.5 to 2 mA; add 0.05% + 1C (or 0.4 ) when it is 0.1 mA. Input capacitance of receiver instrument: 0.1 F or less. *7 When measuring a temperature using a three-wire RTD. NOTICE : -20 to 50C and 90%RH or less (no condensation) : Approximately 192 (W) 92 (H) 42 (D) mm (Excluding protrusions) : Approximately 440 g (including batteries) : Lead cable (1 pair) Terminal adapter (for CA12E only) (1) Instruction manual (1) 1.5-V alkaline battery (ANSI AA-size)(4) * For suffix code -1 Carrying case (1) * For suffix code -2 Rubber boot (1) Strap (1) Accessory case (1) Resolution World Wide Web site at http://www.yokogawa.com/MCC YOKOGAWA METERS & INSTRUMENTS CORPORATION Tachihi Bld. No.2, 6-1-3 Sakaecho, Tachikawa-shi, Tokyo, 190-8586 Japan Phone: +81-42-534-1413 Facsimile: +81-42-534-1426 International Sales Dept. YOKOGAWA CORPORATION OF AMERICA (U.S.A.) YOKOGAWA EUROPE B. V. (THE NETHERLANDS) YOKOGAWA ENGINEERING ASIA PTE. LTD. (SINGAPORE) YOKOGAWA AMERICA DO SUL LTDA (BRAZIL) YOKOGAWA MEASURING INSTRUMENTS KOREA CORPORATION (KOREA) YOKOGAWA AUSTRALIA PTY. LTD. (AUSTRALIA) YOKOGAWA INDIA LTD. (INDIA) YOKOGAWA SHANGHAI TRADING CO., LTD. (CHINA) YOKOGAWA MIDDLE EAST E.C. (BAHRAIN) YOKOGAWA ELECTRIC CIS LTD. (RUSSIAN FEDERATION) Phone: +1-770-253-7000 Phone: +31-334-64-1611 Phone: +65-6241-9933 Phone: +55-11-5681-2400 Phone: +82-2-551-0660 Phone: +61-2-8870-1100 Phone: +91-80-4158-6000 Phone: +86-21-6880-8107 Phone: +973-358100 Phone: +7-095-737-7868 Subject to change without notice. All Rights Reserved. Copyright (c) 2006, Yokogawa Meters & Instruments Corporation. Facsimile: +1-770-251-2088 Facsimile: +31-334-64-1610 Facsimile: +65-6241-2606 Facsimile: +55-11-5681-1274/4434 Facsimile: +82-2-551-0665 Facsimile: +61-2-8870-1111 Facsimile: +91-80-2852-1441 Facsimile: +86-21-6880-4987 Facsimile: +973-336100 Facsimile: +7-095-737-7869 [Ed: 01/b] Before using the product, read the instruction manual carefully to ensure proper and safe operation. Represented by: MIK-ES15 Printed in Japan: May 2006(B)/5,000(KP) Bulletin CA10-E Compact, Low Cost, Versatile Features Voltage/Current Calibrator Examples of Applications Source and Measuring of Voltage and Current Generates and measures voltages up to 30 V DC and currents up to 24 mA DC. Improved display resolution for current Additional Features New function Application Example of CA11E (Transmitter Simulation 1) A + - (Generation) (Distributor) CA12E CA11E * Load current: Max. DC22 mA Lo 20 mA SINK Function Hi Absorbs the voltage supplied from an external power supply to its H terminal and simulates a two-wire transmitter making it ideal for loop checks. 4-20 mA Step-up/down Output Rubber boot (93038) Strap (97040) Accessory case (B9108XA) Allows the calibrator to be hung on a wall. Used to store probes and accessories. b Temperature controller or converter This is an example of connecting the CA12E to a receiver instrument for a three-wire resistance temperature detector (RTD). Using the PT100 range, the RTD signal equivalent to the temperature set at the CA12E is output to the receiver instrument. To cancel the lead wire resistance, connection using three wires is necessary. The terminal adapter that comes with the CA12E simplifies this three-wire connection. This is an example of connecting the CA11E to a two-wire transmitter. The CA11E can generate a voltage of up to 24 V and current of up to 22 mA. It can operate the two-wire transmitter to output and measure 4-20 mA. 4-20 mA and 1-5 V DC Step-up/ down Function The output level can be changed between 4 8 12 16 20 mA signals by one touch for the 4-20 mA DC output, and between 1 2 3 4 5V signals for the 1-5 V DC output, for efficient calibration work. The roomy case easily holds the calibrator without having to disconnect the lead cables. Rubber boot, strap and accessory case can be chosen as standard accessories to improve impact resistance and make it easier to carry. (The calibrator cannot be stored in the carrying case when the rubber boot is attached.) B 4-20mA 24 V (20 mA)/Loop check function* Enables measurement of generated current signals while supplying loop power to two-wire transmitter. Choose either "rubber boot" or "carrying case" Receiver instrument to be calibrated Converter Two-wire transmitter The generation/measurement resolution has improved to 0.001 mA. An Application of CA12E (RTD Simulation) Automatic Power-off Power is turned off automatically if the calibrator is not touched for 10 minutes, prolonging battery life. Simple and Easy Calibration For the CA11E and CA12E, There is performing calibrations during periodic maintenance as they can be simply calibrated by the up/down keys. Runs on 1.5 V AA-size Batteries or AC Adapter An Application of CA11E (Transmitter Simulation 2) Application Example of CA12E (Generation of thermo-electromotive force) The handy calibrators can run on the built-in 1.5-V ANSI batteries or an AC power supply using the AC adapter (sold separately). carrying case (B9108NK) Complete Protection (CA11E) The complete protector protects the circuit against short-circuiting of the voltage output terminals and application of a voltage (of up to 30 V) to the output terminals, etc. due to misconnection. : Up/down key operation 20 mA (100%) 16 mA (75%) 12 mA (50%) 8 mA (25%) 4 mA Power supply Two-wire transmitter Equipment to be calibrated + + 4-20mA - (0%) (Generation) External RJ - Longer Lead Cables The slightly longer than usual lead cables of 1.7 m (approximately 0.1 for both cables) allow easy cable connection even if the handy calibrator is put on the floor. (Distributor) Sweep Function CA11E Increases and decreases the output level to the preset level at a constant rate for the selected sweep time (16 or 32 seconds). The sweep function and sweep time are set by the internal dip switches. Panel Design Common to All Models Power Switch Up/Down Keys Used to set the output signal level. A pair of up/down keys is conveniently located immediately below each digit in the LCD panel. Output On/Off Switch (Output signal can set ON/OFF) Range Selection Rotary Switch The rotary switch simplifies range selection: just leave the switch set to the most frequently used range. Source/Measure Selection Switch Lo Hi CA12E This is an example of connecting the CA11E to a distributor for two-wire transmitters. The CA11E can absorb up to 28 V DC supplied from the distributor and generates a 4-20 mA output (using the 20-mA SINK range), allowing loop check. Temperature controller Temperature converter etc. The CA12E can generate a thermo-electromotive force suitable for ten kinds of thermo-coupler. By attaching an external RJ sensor to the thermocouple to be calibrated, thermo-electromotive force can be output after temperature difference of the thermocouples is corrected. Dip Switches (inside battery compartment) Switch Number 1 2 3 4 Compact and Lightweight Almost the same size and weight as a hand-held digital multimeter, this calibrator is designed for use in the field. CA11E CA12E ON OFF ON OFF Sweep function Sweep function -off The built-in RJC is on. External RJC is on 32 s 16 s F C 24.00 24.000 PT100-IPTS68 PT100-ITS90 Automatic power-off Automatic Automatic power-off Automatic is disabled. power-off is disabled. power-off Model and Suffix Code Calibrators Model and Suffix Code Name Model Suffix code CA11E CA12E Handy CAL -1 -2 Description voltage/current calibrator temperature calibrator With carrying case(B9108NK) With rubber boot(93038), strap(97040), accessory case(B9108XA) Temperature effect: 1/10 of accuracy/C; however, for 100-mV range, 0.005% + 10 V/C Handy Calibrators Accessory Features Name Temperature Calibrator Simulator of Common Thermocouples and RTD Sensors Model AC adapter Outputs a signal equivalent to signals of ten types of thermocouple K, E, J, T, N, S, B, L, M and R as well as Pt100 resistance temperature detector. Suitable for a broad range of applications such as maintenance of industrial process instruments and various thermometers. Description For 100 V For 120 V For 220-240 V A1020UP A1022UP B9108WB B9108WA Reference junction sensor Spare Parts Name Model Lead cables Lead cables Terminal adapter Carrying case Rubber boot Strap Accessory case Multi-range Thermometer Can be used as a multi-range thermometer. Three-wire RTD connection for an RTD is possible. Built-in Sensor for Reference Junction Compensation Reference junction compensation when generating a thermocouple signal can be performed by the built-in temperature sensor. For more precise compensation, use the external RJC sensor (model B9108WA, sold separately). / Description 1 pair(1 red and 1 black cables) for CA11E 1 pair(1 red and 2 black cables) for CA12E for CA12E This spare part is setting with suffix code 01 B9108MS B9108MT B9108KF B9108NK 93038 97040 B9108XA Voltage/Current Calibrator Temperature Calibrator This spare part is setting with suffix code 02 Both signal source and measurement functions Simple operation, easy to use Lightweight, compact body Specifications of Each Model CA11E Voltage/Current Calibrator Source Functions Shift Key Accuracy = (% of setting + value in mV, V, or A), at 23 5C for one year Range Selection Selects " temperature" or "RTD" unit. Range of Generated Signal Terminal Adapter Setting Resolution 0.05% + 20 mV 0.05% + 2 mV 0.05% + 2 mV *2 0.05% + 0.2 mV *2 0.05% + 50 V 0 to 30.00 V 0 to 11.000 V 1/2/3/4/5 V 0 to 1.1000 V 0.00 to 110.00 mV 0 to 24.000 mA 4/8/12/16/20 mA 24 V 0.1 to 24.000 mA 30 V 10 V 1-5 V 1V 100 mV 20 mA *1 4-20 mA *1 24 V (20 mA) *1 20 mASINK *1 Provides screw terminals for connecting a temperature sensor such as a thermocouple and RTD when measuring temperature. When generating an RTD signal, a three-wire RTD signal can be output using the lead cables that come with the CA12E by short-circuiting the Lo-Lo terminals using the shortcircuit bar that also comes with the CA12E. Accuracy 0.05% + 4 A 10% 0.1% + 4 A Temperature effect: 1/10 of accuracy/C; however, for 100-mV range, 0.005% + 10 V/C Short-circuit bar (CA12E) Lo Hi *2 When the load is 1 k or geater, and the error of the lead cables is excluded Addition of rubber boot as accessory Maximum load: 12 V Maximum curret: 22 mA Extemal power supply: 5 to 28 V Accuracy = (% of reading + value in the least significant digit), at 23 5C for one year Range Selection (When outputting a three-wire RTD signal) Remarks Maximum current: 1mA Maximum output current: 10 mA *1 The display resolution can select 24.000 or 24.00 displays with dip switch. Measurement Functions Example of Use of Terminal Adapter 10 mV 1 mV 1 V step 0.1 mV 10 V 1 A 4 mA step -- 1 A Display resolution for current 0.001mA (CA11E) Addition of loop check function (CA11E) Source/measurement of 10 kinds of thermocouples (CA12E) Indication Accuracy Resolution 30 V 0 to 30.00 V DC 0.05% + 2 digits 10 mV 10 V 0 to 11.000 V DC 0.05% + 2 digits 1 mV 1V 0 to 1100.0 mV 0.05% + 2 digits 0.1 mV 100 mV 0 to 110.00 mV DC 0.05% + 7 digits 0.01 mV 20 mA *1 0 to 24.000 mA DC 0.05% + 4 digit 0.001 mA Remarks Input impedance: Approx. 1 M Input impedance: Approx. 45 *1 The display resolution can select 24.000 or 24.00 displays with dip switch. CA12E Temperature Calibrator Plug for External RJC Sensor Source and Measurement Functions The RJC sensor is sold separately. Range Selection b B Plug for AC Adapter Common for all CA11E, CA12E A (Thermometer) Terminal adapter TC *1*4 Accuracy = (% of setting or reading + value in C), at 23 5C for one year Range of Generated Signal/Indication K E J T N R S -200.0 to 1372.0C -200.0 to 1000.0C -200.0 to 1200.0C -200.0 to 400.0C -200.0 to 1300.0C -328 to +2498F -328 to +1832F -328 to +2192F -328 to +752F -328 to +2372F 0 to 1768C +32 to +3214F B 600 to 1800C +1112 to +3272F L U -200 to 900C -328 to +1652F -200 to 400C -328 to +752F 0 to 110.00mV 100mV -200.0 to 850.0C -328 to +1562F RTD PT100 *2 *3 (-200.0 to 500.0C) (-328 to +932F) (JPT100) 0 to 400.0 400 Temperature effect: 1/10 of accuracy/C General/Common Specifications for CA11E/CA12E Power supply Life of Batteries Automatic Power-off : Four 1.5-V alkaline batteries (ANSI AA-size) or dedicated AC adapter (sold separately) : CA11E : Approximately 50 hours for 5 V DC output (with a load of 10k or greater) Approximately 25 hours for 20 mA DC output (with a load of 5 V) CA12E : Approximately 55 hours * When generating a signal continuously on alkaline batteries : Approximately 10 minutes (Can be canceled by DIP switch setting) : By four-digit up/down keys Generation Signal Level Setting Response of generator : CA11E : Approximately 1 second (from when the output begins to change until when the output level falls within the specified accuracy) CA12E (400 and RTD range) : Approximately 20 milliseconds (from when the specified current is applied until when the output level falls within the specified accuracy) Maximum Allowable : CA11E: 30 VDC or less between each terminal and ground CA12E: 42 V peak or less between each terminal and ground Applied Voltage Measurement display update interval Display Operating temperature/ humidity range Storage temperature/ humidity range Dimensions Weight Accessories : Approximately 1 update/sec. : 7 segments LCD : 0 to 50C and 20 to 85%RH (no condensation) *1 *2 *3 *4 Accuracy Source *4 0.05% + 1C (>-100C) 0.05% + 2C (-100C) Measurement *5 0.07% + 1.5C (>-100C) 0.07% + 2C (-100C) Remarks 0.1C or 1F 0.05% + 3C 0.05% + 2C 0.05% + 4C 0.05% + 3C 0.05% + 0.5C 0.05% + 1C 0.05% + 30 V (<100C) (100C) (<1000C) (1000C) (<0C) (0C) 0.07% + 3C 0.07% + 2C 0.07% + 4C 0.07% + 3C 0.07% + 1.5C 0.07% + 2C 0.05% + 30 V (<100C) (100C) 1C or 1F (<1000C) (1000C) (<0C) 0.1C or 1F (0C) 10 V 0.05% + 0.6C *6 0.05% + 0.6C *7 0.05% + 0.2 *6 0.05% + 0.2 *7 Based on the reference thermal EMF table of JIS C1602-1995 Based on the reference resistance table of JIS C1604-1997. Based on the international temperature standard 1990 (ITS-90). The accuracy for generation of thermocouple signals does not include the error of the reference junction compensation. When compensating the output using an RJC sensor, add the accuracy of the RJC sensor. The output compensation is performed every 4 seconds. RJC sensor specifications - measurement range: --10 to 50C; accuracy(in combination with the CA12E): 0.5C at 18 to 28C and 1C at other temperatures. 0.1C or 1F 0.1 *5 The accuracy for measurement of thermocouple signals indicates the error against the reference EMF table and includes the error of the internal reference junction compensation when the temperature at the terminals is stable. *6 External excitation current: 0.5 to 2 mA; add 0.05% + 1C (or 0.4 ) when it is 0.1 mA. Input capacitance of receiver instrument: 0.1 F or less. *7 When measuring a temperature using a three-wire RTD. NOTICE : -20 to 50C and 90%RH or less (no condensation) : Approximately 192 (W) 92 (H) 42 (D) mm (Excluding protrusions) : Approximately 440 g (including batteries) : Lead cable (1 pair) Terminal adapter (for CA12E only) (1) Instruction manual (1) 1.5-V alkaline battery (ANSI AA-size)(4) * For suffix code -1 Carrying case (1) * For suffix code -2 Rubber boot (1) Strap (1) Accessory case (1) Resolution World Wide Web site at http://www.yokogawa.com/MCC YOKOGAWA METERS & INSTRUMENTS CORPORATION Tachihi Bld. No.2, 6-1-3 Sakaecho, Tachikawa-shi, Tokyo, 190-8586 Japan Phone: +81-42-534-1413 Facsimile: +81-42-534-1426 International Sales Dept. YOKOGAWA CORPORATION OF AMERICA (U.S.A.) YOKOGAWA EUROPE B. V. (THE NETHERLANDS) YOKOGAWA ENGINEERING ASIA PTE. LTD. (SINGAPORE) YOKOGAWA AMERICA DO SUL LTDA (BRAZIL) YOKOGAWA MEASURING INSTRUMENTS KOREA CORPORATION (KOREA) YOKOGAWA AUSTRALIA PTY. LTD. (AUSTRALIA) YOKOGAWA INDIA LTD. (INDIA) YOKOGAWA SHANGHAI TRADING CO., LTD. (CHINA) YOKOGAWA MIDDLE EAST E.C. (BAHRAIN) YOKOGAWA ELECTRIC CIS LTD. (RUSSIAN FEDERATION) Phone: +1-770-253-7000 Phone: +31-334-64-1611 Phone: +65-6241-9933 Phone: +55-11-5681-2400 Phone: +82-2-551-0660 Phone: +61-2-8870-1100 Phone: +91-80-4158-6000 Phone: +86-21-6880-8107 Phone: +973-358100 Phone: +7-095-737-7868 Subject to change without notice. All Rights Reserved. Copyright (c) 2006, Yokogawa Meters & Instruments Corporation. Facsimile: +1-770-251-2088 Facsimile: +31-334-64-1610 Facsimile: +65-6241-2606 Facsimile: +55-11-5681-1274/4434 Facsimile: +82-2-551-0665 Facsimile: +61-2-8870-1111 Facsimile: +91-80-2852-1441 Facsimile: +86-21-6880-4987 Facsimile: +973-336100 Facsimile: +7-095-737-7869 [Ed: 01/b] Before using the product, read the instruction manual carefully to ensure proper and safe operation. Represented by: MIK-ES15 Printed in Japan: May 2006(B)/5,000(KP) Bulletin CA10-E Compact, Low Cost, Versatile Features Voltage/Current Calibrator Examples of Applications Source and Measuring of Voltage and Current Generates and measures voltages up to 30 V DC and currents up to 24 mA DC. Improved display resolution for current Additional Features New function Application Example of CA11E (Transmitter Simulation 1) A + - (Generation) (Distributor) CA12E CA11E * Load current: Max. DC22 mA Lo 20 mA SINK Function Hi Absorbs the voltage supplied from an external power supply to its H terminal and simulates a two-wire transmitter making it ideal for loop checks. 4-20 mA Step-up/down Output Rubber boot (93038) Strap (97040) Accessory case (B9108XA) Allows the calibrator to be hung on a wall. Used to store probes and accessories. b Temperature controller or converter This is an example of connecting the CA12E to a receiver instrument for a three-wire resistance temperature detector (RTD). Using the PT100 range, the RTD signal equivalent to the temperature set at the CA12E is output to the receiver instrument. To cancel the lead wire resistance, connection using three wires is necessary. The terminal adapter that comes with the CA12E simplifies this three-wire connection. This is an example of connecting the CA11E to a two-wire transmitter. The CA11E can generate a voltage of up to 24 V and current of up to 22 mA. It can operate the two-wire transmitter to output and measure 4-20 mA. 4-20 mA and 1-5 V DC Step-up/ down Function The output level can be changed between 4 8 12 16 20 mA signals by one touch for the 4-20 mA DC output, and between 1 2 3 4 5V signals for the 1-5 V DC output, for efficient calibration work. The roomy case easily holds the calibrator without having to disconnect the lead cables. Rubber boot, strap and accessory case can be chosen as standard accessories to improve impact resistance and make it easier to carry. (The calibrator cannot be stored in the carrying case when the rubber boot is attached.) B 4-20mA 24 V (20 mA)/Loop check function* Enables measurement of generated current signals while supplying loop power to two-wire transmitter. Choose either "rubber boot" or "carrying case" Receiver instrument to be calibrated Converter Two-wire transmitter The generation/measurement resolution has improved to 0.001 mA. An Application of CA12E (RTD Simulation) Automatic Power-off Power is turned off automatically if the calibrator is not touched for 10 minutes, prolonging battery life. Simple and Easy Calibration For the CA11E and CA12E, There is performing calibrations during periodic maintenance as they can be simply calibrated by the up/down keys. Runs on 1.5 V AA-size Batteries or AC Adapter An Application of CA11E (Transmitter Simulation 2) Application Example of CA12E (Generation of thermo-electromotive force) The handy calibrators can run on the built-in 1.5-V ANSI batteries or an AC power supply using the AC adapter (sold separately). carrying case (B9108NK) Complete Protection (CA11E) The complete protector protects the circuit against short-circuiting of the voltage output terminals and application of a voltage (of up to 30 V) to the output terminals, etc. due to misconnection. : Up/down key operation 20 mA (100%) 16 mA (75%) 12 mA (50%) 8 mA (25%) 4 mA Power supply Two-wire transmitter Equipment to be calibrated + + 4-20mA - (0%) (Generation) External RJ - Longer Lead Cables The slightly longer than usual lead cables of 1.7 m (approximately 0.1 for both cables) allow easy cable connection even if the handy calibrator is put on the floor. (Distributor) Sweep Function CA11E Increases and decreases the output level to the preset level at a constant rate for the selected sweep time (16 or 32 seconds). The sweep function and sweep time are set by the internal dip switches. Panel Design Common to All Models Power Switch Up/Down Keys Used to set the output signal level. A pair of up/down keys is conveniently located immediately below each digit in the LCD panel. Output On/Off Switch (Output signal can set ON/OFF) Range Selection Rotary Switch The rotary switch simplifies range selection: just leave the switch set to the most frequently used range. Source/Measure Selection Switch Lo Hi CA12E This is an example of connecting the CA11E to a distributor for two-wire transmitters. The CA11E can absorb up to 28 V DC supplied from the distributor and generates a 4-20 mA output (using the 20-mA SINK range), allowing loop check. Temperature controller Temperature converter etc. The CA12E can generate a thermo-electromotive force suitable for ten kinds of thermo-coupler. By attaching an external RJ sensor to the thermocouple to be calibrated, thermo-electromotive force can be output after temperature difference of the thermocouples is corrected. Dip Switches (inside battery compartment) Switch Number 1 2 3 4 Compact and Lightweight Almost the same size and weight as a hand-held digital multimeter, this calibrator is designed for use in the field. CA11E CA12E ON OFF ON OFF Sweep function Sweep function -off The built-in RJC is on. External RJC is on 32 s 16 s F C 24.00 24.000 PT100-IPTS68 PT100-ITS90 Automatic power-off Automatic Automatic power-off Automatic is disabled. power-off is disabled. power-off Compact, Low Cost, Versatile Features Voltage/Current Calibrator Examples of Applications Source and Measuring of Voltage and Current Generates and measures voltages up to 30 V DC and currents up to 24 mA DC. Improved display resolution for current Additional Features New function Application Example of CA11E (Transmitter Simulation 1) A + - (Generation) (Distributor) CA12E CA11E * Load current: Max. DC22 mA Lo 20 mA SINK Function Hi Absorbs the voltage supplied from an external power supply to its H terminal and simulates a two-wire transmitter making it ideal for loop checks. 4-20 mA Step-up/down Output Rubber boot (93038) Strap (97040) Accessory case (B9108XA) Allows the calibrator to be hung on a wall. Used to store probes and accessories. b Temperature controller or converter This is an example of connecting the CA12E to a receiver instrument for a three-wire resistance temperature detector (RTD). Using the PT100 range, the RTD signal equivalent to the temperature set at the CA12E is output to the receiver instrument. To cancel the lead wire resistance, connection using three wires is necessary. The terminal adapter that comes with the CA12E simplifies this three-wire connection. This is an example of connecting the CA11E to a two-wire transmitter. The CA11E can generate a voltage of up to 24 V and current of up to 22 mA. It can operate the two-wire transmitter to output and measure 4-20 mA. 4-20 mA and 1-5 V DC Step-up/ down Function The output level can be changed between 4 8 12 16 20 mA signals by one touch for the 4-20 mA DC output, and between 1 2 3 4 5V signals for the 1-5 V DC output, for efficient calibration work. The roomy case easily holds the calibrator without having to disconnect the lead cables. Rubber boot, strap and accessory case can be chosen as standard accessories to improve impact resistance and make it easier to carry. (The calibrator cannot be stored in the carrying case when the rubber boot is attached.) B 4-20mA 24 V (20 mA)/Loop check function* Enables measurement of generated current signals while supplying loop power to two-wire transmitter. Choose either "rubber boot" or "carrying case" Receiver instrument to be calibrated Converter Two-wire transmitter The generation/measurement resolution has improved to 0.001 mA. An Application of CA12E (RTD Simulation) Automatic Power-off Power is turned off automatically if the calibrator is not touched for 10 minutes, prolonging battery life. Simple and Easy Calibration For the CA11E and CA12E, There is performing calibrations during periodic maintenance as they can be simply calibrated by the up/down keys. Runs on 1.5 V AA-size Batteries or AC Adapter An Application of CA11E (Transmitter Simulation 2) Application Example of CA12E (Generation of thermo-electromotive force) The handy calibrators can run on the built-in 1.5-V ANSI batteries or an AC power supply using the AC adapter (sold separately). carrying case (B9108NK) Complete Protection (CA11E) The complete protector protects the circuit against short-circuiting of the voltage output terminals and application of a voltage (of up to 30 V) to the output terminals, etc. due to misconnection. : Up/down key operation 20 mA (100%) 16 mA (75%) 12 mA (50%) 8 mA (25%) 4 mA Power supply Two-wire transmitter Equipment to be calibrated + + 4-20mA - (0%) (Generation) External RJ - Longer Lead Cables The slightly longer than usual lead cables of 1.7 m (approximately 0.1 for both cables) allow easy cable connection even if the handy calibrator is put on the floor. (Distributor) Sweep Function CA11E Increases and decreases the output level to the preset level at a constant rate for the selected sweep time (16 or 32 seconds). The sweep function and sweep time are set by the internal dip switches. Panel Design Common to All Models Power Switch Up/Down Keys Used to set the output signal level. A pair of up/down keys is conveniently located immediately below each digit in the LCD panel. Output On/Off Switch (Output signal can set ON/OFF) Range Selection Rotary Switch The rotary switch simplifies range selection: just leave the switch set to the most frequently used range. Source/Measure Selection Switch Lo Hi CA12E This is an example of connecting the CA11E to a distributor for two-wire transmitters. The CA11E can absorb up to 28 V DC supplied from the distributor and generates a 4-20 mA output (using the 20-mA SINK range), allowing loop check. Temperature controller Temperature converter etc. The CA12E can generate a thermo-electromotive force suitable for ten kinds of thermo-coupler. By attaching an external RJ sensor to the thermocouple to be calibrated, thermo-electromotive force can be output after temperature difference of the thermocouples is corrected. Dip Switches (inside battery compartment) Switch Number 1 2 3 4 Compact and Lightweight Almost the same size and weight as a hand-held digital multimeter, this calibrator is designed for use in the field. CA11E CA12E ON OFF ON OFF Sweep function Sweep function -off The built-in RJC is on. External RJC is on 32 s 16 s F C 24.00 24.000 PT100-IPTS68 PT100-ITS90 Automatic power-off Automatic Automatic power-off Automatic is disabled. power-off is disabled. power-off Model and Suffix Code Calibrators Model and Suffix Code Name Model Suffix code CA11E CA12E Handy CAL -1 -2 Description voltage/current calibrator temperature calibrator With carrying case(B9108NK) With rubber boot(93038), strap(97040), accessory case(B9108XA) Temperature effect: 1/10 of accuracy/C; however, for 100-mV range, 0.005% + 10 V/C Handy Calibrators Accessory Features Name Temperature Calibrator Simulator of Common Thermocouples and RTD Sensors Model AC adapter Outputs a signal equivalent to signals of ten types of thermocouple K, E, J, T, N, S, B, L, M and R as well as Pt100 resistance temperature detector. Suitable for a broad range of applications such as maintenance of industrial process instruments and various thermometers. Description For 100 V For 120 V For 220-240 V A1020UP A1022UP B9108WB B9108WA Reference junction sensor Spare Parts Name Model Lead cables Lead cables Terminal adapter Carrying case Rubber boot Strap Accessory case Multi-range Thermometer Can be used as a multi-range thermometer. Three-wire RTD connection for an RTD is possible. Built-in Sensor for Reference Junction Compensation Reference junction compensation when generating a thermocouple signal can be performed by the built-in temperature sensor. For more precise compensation, use the external RJC sensor (model B9108WA, sold separately). / Description 1 pair(1 red and 1 black cables) for CA11E 1 pair(1 red and 2 black cables) for CA12E for CA12E This spare part is setting with suffix code 01 B9108MS B9108MT B9108KF B9108NK 93038 97040 B9108XA Voltage/Current Calibrator Temperature Calibrator This spare part is setting with suffix code 02 Both signal source and measurement functions Simple operation, easy to use Lightweight, compact body Specifications of Each Model CA11E Voltage/Current Calibrator Source Functions Shift Key Accuracy = (% of setting + value in mV, V, or A), at 23 5C for one year Range Selection Selects " temperature" or "RTD" unit. Range of Generated Signal Terminal Adapter Setting Resolution 0.05% + 20 mV 0.05% + 2 mV 0.05% + 2 mV *2 0.05% + 0.2 mV *2 0.05% + 50 V 0 to 30.00 V 0 to 11.000 V 1/2/3/4/5 V 0 to 1.1000 V 0.00 to 110.00 mV 0 to 24.000 mA 4/8/12/16/20 mA 24 V 0.1 to 24.000 mA 30 V 10 V 1-5 V 1V 100 mV 20 mA *1 4-20 mA *1 24 V (20 mA) *1 20 mASINK *1 Provides screw terminals for connecting a temperature sensor such as a thermocouple and RTD when measuring temperature. When generating an RTD signal, a three-wire RTD signal can be output using the lead cables that come with the CA12E by short-circuiting the Lo-Lo terminals using the shortcircuit bar that also comes with the CA12E. Accuracy 0.05% + 4 A 10% 0.1% + 4 A Temperature effect: 1/10 of accuracy/C; however, for 100-mV range, 0.005% + 10 V/C Short-circuit bar (CA12E) Lo Hi *2 When the load is 1 k or geater, and the error of the lead cables is excluded Addition of rubber boot as accessory Maximum load: 12 V Maximum curret: 22 mA Extemal power supply: 5 to 28 V Accuracy = (% of reading + value in the least significant digit), at 23 5C for one year Range Selection (When outputting a three-wire RTD signal) Remarks Maximum current: 1mA Maximum output current: 10 mA *1 The display resolution can select 24.000 or 24.00 displays with dip switch. Measurement Functions Example of Use of Terminal Adapter 10 mV 1 mV 1 V step 0.1 mV 10 V 1 A 4 mA step -- 1 A Display resolution for current 0.001mA (CA11E) Addition of loop check function (CA11E) Source/measurement of 10 kinds of thermocouples (CA12E) Indication Accuracy Resolution 30 V 0 to 30.00 V DC 0.05% + 2 digits 10 mV 10 V 0 to 11.000 V DC 0.05% + 2 digits 1 mV 1V 0 to 1100.0 mV 0.05% + 2 digits 0.1 mV 100 mV 0 to 110.00 mV DC 0.05% + 7 digits 0.01 mV 20 mA *1 0 to 24.000 mA DC 0.05% + 4 digit 0.001 mA Remarks Input impedance: Approx. 1 M Input impedance: Approx. 45 *1 The display resolution can select 24.000 or 24.00 displays with dip switch. CA12E Temperature Calibrator Plug for External RJC Sensor Source and Measurement Functions The RJC sensor is sold separately. Range Selection b B Plug for AC Adapter Common for all CA11E, CA12E A (Thermometer) Terminal adapter TC *1*4 Accuracy = (% of setting or reading + value in C), at 23 5C for one year Range of Generated Signal/Indication K E J T N R S -200.0 to 1372.0C -200.0 to 1000.0C -200.0 to 1200.0C -200.0 to 400.0C -200.0 to 1300.0C -328 to +2498F -328 to +1832F -328 to +2192F -328 to +752F -328 to +2372F 0 to 1768C +32 to +3214F B 600 to 1800C +1112 to +3272F L U -200 to 900C -328 to +1652F -200 to 400C -328 to +752F 0 to 110.00mV 100mV -200.0 to 850.0C -328 to +1562F RTD PT100 *2 *3 (-200.0 to 500.0C) (-328 to +932F) (JPT100) 0 to 400.0 400 Temperature effect: 1/10 of accuracy/C General/Common Specifications for CA11E/CA12E Power supply Life of Batteries Automatic Power-off : Four 1.5-V alkaline batteries (ANSI AA-size) or dedicated AC adapter (sold separately) : CA11E : Approximately 50 hours for 5 V DC output (with a load of 10k or greater) Approximately 25 hours for 20 mA DC output (with a load of 5 V) CA12E : Approximately 55 hours * When generating a signal continuously on alkaline batteries : Approximately 10 minutes (Can be canceled by DIP switch setting) : By four-digit up/down keys Generation Signal Level Setting Response of generator : CA11E : Approximately 1 second (from when the output begins to change until when the output level falls within the specified accuracy) CA12E (400 and RTD range) : Approximately 20 milliseconds (from when the specified current is applied until when the output level falls within the specified accuracy) Maximum Allowable : CA11E: 30 VDC or less between each terminal and ground CA12E: 42 V peak or less between each terminal and ground Applied Voltage Measurement display update interval Display Operating temperature/ humidity range Storage temperature/ humidity range Dimensions Weight Accessories : Approximately 1 update/sec. : 7 segments LCD : 0 to 50C and 20 to 85%RH (no condensation) *1 *2 *3 *4 Accuracy Source *4 0.05% + 1C (>-100C) 0.05% + 2C (-100C) Measurement *5 0.07% + 1.5C (>-100C) 0.07% + 2C (-100C) Remarks 0.1C or 1F 0.05% + 3C 0.05% + 2C 0.05% + 4C 0.05% + 3C 0.05% + 0.5C 0.05% + 1C 0.05% + 30 V (<100C) (100C) (<1000C) (1000C) (<0C) (0C) 0.07% + 3C 0.07% + 2C 0.07% + 4C 0.07% + 3C 0.07% + 1.5C 0.07% + 2C 0.05% + 30 V (<100C) (100C) 1C or 1F (<1000C) (1000C) (<0C) 0.1C or 1F (0C) 10 V 0.05% + 0.6C *6 0.05% + 0.6C *7 0.05% + 0.2 *6 0.05% + 0.2 *7 Based on the reference thermal EMF table of JIS C1602-1995 Based on the reference resistance table of JIS C1604-1997. Based on the international temperature standard 1990 (ITS-90). The accuracy for generation of thermocouple signals does not include the error of the reference junction compensation. When compensating the output using an RJC sensor, add the accuracy of the RJC sensor. The output compensation is performed every 4 seconds. RJC sensor specifications - measurement range: --10 to 50C; accuracy(in combination with the CA12E): 0.5C at 18 to 28C and 1C at other temperatures. 0.1C or 1F 0.1 *5 The accuracy for measurement of thermocouple signals indicates the error against the reference EMF table and includes the error of the internal reference junction compensation when the temperature at the terminals is stable. *6 External excitation current: 0.5 to 2 mA; add 0.05% + 1C (or 0.4 ) when it is 0.1 mA. Input capacitance of receiver instrument: 0.1 F or less. *7 When measuring a temperature using a three-wire RTD. NOTICE : -20 to 50C and 90%RH or less (no condensation) : Approximately 192 (W) 92 (H) 42 (D) mm (Excluding protrusions) : Approximately 440 g (including batteries) : Lead cable (1 pair) Terminal adapter (for CA12E only) (1) Instruction manual (1) 1.5-V alkaline battery (ANSI AA-size)(4) * For suffix code -1 Carrying case (1) * For suffix code -2 Rubber boot (1) Strap (1) Accessory case (1) Resolution World Wide Web site at http://www.yokogawa.com/MCC YOKOGAWA METERS & INSTRUMENTS CORPORATION Tachihi Bld. No.2, 6-1-3 Sakaecho, Tachikawa-shi, Tokyo, 190-8586 Japan Phone: +81-42-534-1413 Facsimile: +81-42-534-1426 International Sales Dept. YOKOGAWA CORPORATION OF AMERICA (U.S.A.) YOKOGAWA EUROPE B. V. (THE NETHERLANDS) YOKOGAWA ENGINEERING ASIA PTE. LTD. (SINGAPORE) YOKOGAWA AMERICA DO SUL LTDA (BRAZIL) YOKOGAWA MEASURING INSTRUMENTS KOREA CORPORATION (KOREA) YOKOGAWA AUSTRALIA PTY. LTD. (AUSTRALIA) YOKOGAWA INDIA LTD. (INDIA) YOKOGAWA SHANGHAI TRADING CO., LTD. (CHINA) YOKOGAWA MIDDLE EAST E.C. (BAHRAIN) YOKOGAWA ELECTRIC CIS LTD. (RUSSIAN FEDERATION) Phone: +1-770-253-7000 Phone: +31-334-64-1611 Phone: +65-6241-9933 Phone: +55-11-5681-2400 Phone: +82-2-551-0660 Phone: +61-2-8870-1100 Phone: +91-80-4158-6000 Phone: +86-21-6880-8107 Phone: +973-358100 Phone: +7-095-737-7868 Subject to change without notice. All Rights Reserved. Copyright (c) 2006, Yokogawa Meters & Instruments Corporation. Facsimile: +1-770-251-2088 Facsimile: +31-334-64-1610 Facsimile: +65-6241-2606 Facsimile: +55-11-5681-1274/4434 Facsimile: +82-2-551-0665 Facsimile: +61-2-8870-1111 Facsimile: +91-80-2852-1441 Facsimile: +86-21-6880-4987 Facsimile: +973-336100 Facsimile: +7-095-737-7869 [Ed: 01/b] Before using the product, read the instruction manual carefully to ensure proper and safe operation. Represented by: MIK-ES15 Printed in Japan: May 2006(B)/5,000(KP) Bulletin CA10-E