HCSM Series Stackpole Electronics, Inc. High Power Current Shunt Resistor Features: * * * * Applications: * * * * * Resistive Product Solutions 5W power rating in a small chip size 2818 size Excellent long term stability RoHS compliant, lead-free and halogen-free AEC-Q200 compliant Power modules Frequency converters Inverter control Power management Current sensor for power hybrid sources Electrical Specifications Type / Code Power Rating HCSM2818 5W 200 ppm/C Ohmic Range () and Tolerance 1% and 5% 0.004, 0.005 (*) 75 ppm/C 0.01, 0.015, 0.02 (*) TCR (ppm/C) (*) Other values may be available, but may require higher MOQ. Contact factory. Mechanical Specifications Type / Code L W H T Unit HCSM2818 0.280 0.010 7.10 0.25 0.195 0.010 4.95 0.25 0.065 0.010 1.65 0.25 0.118 0.010 3.00 0.25 inches mm Power Derating Curve: Percent Rated Power (%) 100 -55C 100C 80 60 40 20 0 -60 170C 0 20 This specification may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 60 80 100 120 140 160 180 Terminal Temperature (C) Operating temperature range of -55 to 170C. Storage condition: 5~35C, humidity of 40~75%. Rev Date: 09/26/2018 40 1 www.seielect.com marketing@seielect.com HCSM Series Stackpole Electronics, Inc. High Power Current Shunt Resistor Resistive Product Solutions Environmental Performance Characteristics Test Test Method Test Specification Test Condition Short Time Overload JIS-C5202-5.5 R: (1%+0.0005) 4 times rated power for 5 seconds Temperature Coefficient of Resistance (TCR) JIS-5202-5.2 Refer to Electrical Specifications Damp Heat with Load MIL-STD-202, Method 103 R: (1%+0.0005) The specimens shall be placed in a chamber and subjected to a relative humidity of 90~95% and a temperature of 40C 2C for a period of 1000 hours with applied rated power, 1.5 hours ON and 0.5 hour OFF. High Temperature Exposure JIS-C5202-7.2 R: (1%+0.0005) The chip (mounted on board) is exposed in the heat chamber, 125C 3C for 1000 hours Load Life JIS-C5202-7.10 R: (1%+0.0005) Apply rated power at 70C 2C for 1000 hours with 1.5 hours ON and 0.5 hour OFF. +25C / +125C The chip (mounted on board) is exposed, -55C 3C (30 minutes) / +125 2C (30 min) for 5 cycles. The following conditions as the figure below. Rapid Change of Temperature R: (1%+0.0005) JIS-C5202-7.4 Function Performance Characteristics Test Test Method Test Specification Test Condition Mount the chip to test substrate. Apply pressure in direction of arrow unit band width reaches 2mm (+0.2/-0mm) illustrated in the picture below and hold for 10 1 seconds. (JIS-C5202-6.1) JIS-C5202-6.1 R: (1%+0.0005) Solvent Resistance MIL-STD-202, Method 215 Verify marking permanency. (Not required for laser etched parts or parts with no marking). The chip is completely immersed in isopropyl alcohol for 3(+5/-0) minutes at 25C 5C. Resistance to Solder Heat MIL-STD-202, Method 210 R: (1%+0.0005) The chip shall be immersed into the flux specified in the solder bath 260C 5C for 10 1 seconds. Bending Strength Rev Date: 09/26/2018 This specification may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 2 www.seielect.com marketing@seielect.com HCSM Series Stackpole Electronics, Inc. High Power Current Shunt Resistor Resistive Product Solutions Function Performance Characteristics (cont.) Test Test Method Test Specification Test Condition The chip shall be immersed into the flux specified in the solder bath 235C 5C for 2 0.5 seconds. It shall be immersed to a point 10mm from its root. (Sn96.5/Ag3.0/Cu0.5) Solder shall cover 95% or more of the electrode area JIS-C5202-6.11 Solderability Note: 5W with total solder pad trace size of 500mm2. The surface temperature of component should be below 100C. Taping Specifications - Embossed Plastic Tape Type / Code A B E F W t Unit 0.205 0.004 5.21 0.10 0.303 0.004 7.69 0.10 0.069 0.004 1.75 0.10 0.295 0.004 7.50 0.10 0.630 0.012 16.00 0.30 0.012 0.002 0.30 0.05 inches mm P0 P1 P2 D0 D1 Unit 0.157 0.004 4.00 0.10 0.315 0.004 8.00 0.10 0.079 0.004 2.00 0.10 0.059 0.004 1.50 0.10 0.059 0.004 1.50 0.10 inches mm HCSM2818 Recommended Pad Layouts Type / Code a b c d Unit HCSM2818 0.138 3.50 0.209 5.30 0.020 0.50 0.024 0.60 inches mm Rev Date: 09/26/2018 This specification may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 3 www.seielect.com marketing@seielect.com HCSM Series Stackpole Electronics, Inc. High Power Current Shunt Resistor Resistive Product Solutions Soldering Recommendations: * * * Peak reflow temperatures and durations IR Reflow Peak = 260C max for 10 seconds Wave Solder = 260C max for 10 seconds Compatible with lead and lead-free solder reflow processes Recommended IR reflow profile: RoHS Compliance Stackpole Electronics has joined the worldwide effort to reduce the amount of lead in electronic components and to meet the various regulatory requirements now prevalent, such as the European Union's directive regarding "Restrictions on Hazardous Substances" (RoHS 3). As part of this ongoing program, we periodically update this document with the status regarding the availability of our compliant components. All our standard part numbers are compliant to EU Directive 2011/65/EU of the European Parliament as amended by Directive (EU) 2015/863/EU as regards the list of restricted substances. RoHS Compliance Status Standard Product Series HCSM Description Package / Termination Type Standard Series RoHS Compliant Lead-Free Termination Composition Lead-Free Mfg. Effective Date (Std Product Series) Lead-Free Effective Date Code (YY/WW) High Current Shunt Resistor SMD YES 100% Copper Always Always "Conflict Metals" Commitment We at Stackpole Electronics, Inc. are joined with our industry in opposing the use of metals mined in the "conflict region" of the eastern Democratic Republic of the Congo (DRC) in our products. Recognizing that the supply chain for metals used in the electronics industry is very complex, we work closely with our own suppliers to verify to the extent possible that the materials and products we supply do not contain metals sourced from this conflict region. As such, we are in compliance with the requirements of Dodd-Frank Act regarding Conflict Minerals. Rev Date: 09/26/2018 This specification may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 4 www.seielect.com marketing@seielect.com HCSM Series Stackpole Electronics, Inc. High Power Current Shunt Resistor Resistive Product Solutions Compliance to "REACH" We certify that all passive components supplied by Stackpole Electronics, Inc. are SVHC (Substances of Very High Concern) free and compliant with the requirements of EU Directive 1907/2006/EC, "The Registration, Evaluation, Authorization and Restriction of Chemicals", otherwise referred to as REACH. Contact us for complete list of REACH Substance Candidate List. Environmental Policy It is the policy of Stackpole Electronics, Inc. (SEI) to protect the environment in all localities in which we operate. We continually strive to improve our effect on the environment. We observe all applicable laws and regulations regarding the protection of our environment and all requests related to the environment to which we have agreed. We are committed to the prevention of all forms of pollution. How to Order 1 2 3 4 5 6 7 8 9 10 11 12 13 14 H C S M 2 8 1 8 F T 2 0 L 0 Product Series HCSM Size 2818 Tolerance Code Tol F 1% J 5% Code T Packaging Description 13" Reel - Plastic Tape Resistance Value Size 2818 Quantity 3500 Four characters with "L" used as multiplier -3 of 10 for any value under 0.1 ohm 0.004 ohm = 4L00 0.01 ohm = 10L0 0.015 ohm = 15L0 Rev Date: 09/26/2018 This specification may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 5 www.seielect.com marketing@seielect.com