(R) DIP Sockets Peel-A-Way DIP Socket Terminal Carriers Table of Models Description: Peel-A-Way(R) Socket (KS) Material: Polyimide Film Index: -269C to 400C (-452F to 752F) .005 (.13) Polyimide Film For molded insulators, see pages 28-29. Options Tape Seal - add 3M to end of part number * Removable tape seal protects plated contact in harsh environments * Sealed socket will not allow dirt and other contaminants to enter socket chamber and become entrapped behind contact fingers Features: * Peel away terminal carrier after soldering. * Disposable carrier. * Spray flux without contaminating contact area (shown here on molded socket) Material Silicone Backed Polyimide Film, -74C to 260C (-100F to 500F) * Complete soldering visibility on both sides of PCB. Intermittent to 371C (700F) * Maximum air flow. * Better flux rinse. * No contact damage due to terminal carrier insertion. Solder Preform Terminals Tin/Lead: Type -151 Lead-free: Type -812 .072 Dia. (1.83) .072 Dia. (1.83) * No contact pull out due to extraction of terminal carrier. Specifications: Terminals: Brass - Copper Alloy (C36000) ASTM-B-16 Contacts: Beryllium Copper - Copper Alloy (C17200) ASTM-B-194 Solder Preform: Standard: 63Sn/37Pb Lead-free: 95.5Sn/4.0Ag/0.5Cu Plating: G - Gold over Nickel M - Matte Tin over Nickel T - Tin/Lead over Nickel Gold per ASTM-B-488 Matte Tin per ASTM545-97 Tin/Lead per MIL-P-81728 Nickel per QQ-N-290 See pg. 29 for intrusive reflow application. Tin/Lead: Type -150 Lead-free: Type -811 Tin/Lead: Type -111 Lead-free: Type -810 Peel-A-Way(R) only .165 (4.19) Solder Preform .130 (3.30) Solder Preform .058 Dia. (1.47) Solder Preform .031 (.79) .155 (3.94) .110 (2.79) .125 (3.18) .038 Dia. (.97) .020 Dia. (.51) .020 Dia. (.51) How To Order KS 3 16 - 85 M G Contact Plating Body Type RoHS Compliant Insulators: RoHS Compliant: KS - Peel-A-Way G - Gold T - Tin/Lead DIP Spacing 3 - .300/(7.62mm) 4 - .400/(10.16mm) 6 - .600/(15.24mm) 9 - .900/(22.86mm) Number of Pins (8 to 64) Additional sizes available - consult factory. Terminal Plating RoHS Compliant: G - Gold M - Matte Tin T - Tin/Lead Terminal Type See options on next page Note: Terminals plated with Matte Tin are available only with Gold plated contacts. Quick-Turn delivery is not available on products with Matte Tin plating. 5 Energy Way, West Warwick, RI 02893 USA Tel: 800.424.9850 | 401.823.5200 Fax: 401.823.8723 info@advanced.com | www.advanced.com Catalog 16 rev. Sept. 07 Products shown covered by patents issued and/or pending. Specifications subject to change without notice. inch/(mm) (R) Additional standard and custom terminals available. See Terminals section or consult factory. AY D E LI V Type -33 Type -51 Type -04 Type -49 Low Profile Solder Tail Low Profile Solder Tail Super Low Profile Ultra Low Profile .165 (4.19) .130 (3.30) .125 (3.18) .120 (3.05) .028 Dia. (.71) Type -85 Type -176 Type -210 Near Flush Solder Tail Near Flush Solder Tail Near Flush Solder Tail .030 (.76) .125 (3.18) .015 (.38) .125 (3.18) .038 Dia. (.97) .095 (2.41) .028 Dia. (.71) .020 Dia. (.51) .030 (.76) .095 (2.41) .110 (2.79) .110 (2.79) .020 Dia. (.51) 3 DIP Sockets ER Y 3D Standard Quick-Turn Terminals K-TU IC RN QU Peel-A-Way DIP Socket Terminal Carriers How To Use: .140 (3.55) .034 Dia. (.86) .034 Dia. (.86) Polyimide Film Note: Terminals shown with insulator removed. Peel away after soldering to PCB. Dimensional Information C A B Solder fillets visible both sides for inspection and cleaning. PCB .005 (.13) Surface Mount Options Available # of Pins 10 # of Pins 8 10 12 14 16 18 20 22 24 28 40 16 20 22 24 28 32 inch/(mm) A .300 (7.62) .300 (7.62) .300 (7.62) .300 (7.62) .300 (7.62) .300 (7.62) .300 (7.62) .300 (7.62) .300 (7.62) .300 (7.62) .300 (7.62) .400 (10.16) .400 (10.16) .400 (10.16) .400 (10.16) .400 (10.16) .400 (10.16) B .400 (10.16) .400 (10.16) .400 (10.16) .400 (10.16) .400 (10.16) .400 (10.16) .400 (10.16) .400 (10.16) .400 (10.16) .400 (10.16) .400 (10.16) .500 (12.70) .500 (12.70) .500 (12.70) .500 (12.70) .500 (12.70) .500 (12.70) C .400 (10.16) .500 (12.70) .600 (15.24) .700 (17.78) .800 (20.32) .900 (22.86) 1.000 (25.40) 1.100 (27.94) 1.200 (30.48) 1.400 (35.56) 2.000 (50.80) .800 (20.32) 1.000 (25.40) 1.100 (27.94) 1.200 (30.48) 1.400 (35.56) 1.600 (40.64) 18 20 22 24 28 32 36 40 42 48 64 32 36 40 52 56 64 A .600 (15.24) .600 (15.24) .600 (15.24) .600 (15.24) .600 (15.24) .600 (15.24) .600 (15.24) .600 (15.24) .600 (15.24) .600 (15.24) .600 (15.24) .600 (15.24) .900 (22.86) .900 (22.86) .900 (22.86) .900 (22.86) .900 (22.86) .900 (22.86) B .700 (17.76) .700 (17.76) .700 (17.76) .700 (17.76) .700 (17.76) .700 (17.76) .700 (17.76) .700 (17.76) .700 (17.76) .700 (17.76) .700 (17.76) .700 (17.76) 1.000 (25.40) 1.000 (25.40) 1.000 (25.40) 1.000 (25.40) 1.000 (25.40) 1.000 (25.40) C .500 (12.70) .900 (22.86) 1.000 (25.40) 1.100 (27.94) 1.200 (30.48) 1.400 (35.56) 1.600 (40.64) 1.800 (45.72) 2.000 (50.80) 2.100 (53.34) 2.400 (60.96) 3.200 (81.28) 1.600 (40.64) 1.800 (45.72) 2.000 (50.80) 2.600 (66.04) 2.800 (71.12) 3.200 (81.28) Products shown covered by patents issued and/or pending. Specifications subject to change without notice. 1. Place socket on PC board. 2. Send PC board and socket through soldering operation. 3. Peel away polyimide film carrier for complete solder joint visibility or leave in place for added stability. Available Online: * RoHS Qualification Test Report * CAD Drawings 5 Energy Way, West Warwick, RI 02893 USA Tel: 800.424.9850 | 401.823.5200 Fax: 401.823.8723 info@advanced.com | www.advanced.com Catalog 16 rev. Sept. 07