2www.irf.com
IRHM7260, JANSR2N7433 Pre-Irradiation
Note: Corresponding Spice and Saber models are available on the International Rectifier Website.
For footnotes refer to the last page
Source-Drain Diode Ratings and Characteristics
Parameter Min Typ Max Units Test Conditions
ISContinuous Source Current (Body Diode) — — 35*
ISM Pulse Source Current (Body Diode) À— — 140
VSD Diode Forward Voltage — — 1.8 V Tj = 25°C, IS = 35A, VGS = 0V Ã
trr Reverse Recovery Time — — 820 ns Tj = 25°C, IF = 35A, di/dt ≤ 100A/µs
QRR Reverse Recovery Charge — — 8.5 µC VDD ≤ 50V Ã
ton Forward Turn-On Time Intrinsic turn-on time is negligible. Turn-on speed is substantially controlled by LS + LD.
A
Thermal Resistance
Parameter Min Typ Max Units Test Conditions
RthJC Junction-to-Case — — 0.50
RthJA Junction-to-Ambient — — 48 °C/W Typical socket mount
RthCS Case-to-Sink — 0.21 —
Electrical Characteristics @ Tj = 25°C (Unless Otherwise Specified)
Parameter Min Typ Max Units Test Conditions
BVDSS Drain-to-Source Breakdown Voltage 200 — — V VGS = 0V, ID = 1.0mA
∆BVDSS/∆TJTemperature Coefficient of Breakdown — 0.26 — V/°C Reference to 25°C, ID = 1.0mA
Voltage
RDS(on) Static Drain-to-Source On-State — — 0.070 ΩVGS = 12V, ID = 25A
Resistance — — 0.077 VGS = 12V, ID = 35A
VGS(th) Gate Threshold Voltage 2.0 — 4.0 V VDS = VGS, ID = 1.0mA
gfs Forward Transconductance 9.0 — — S VDS ≥ 15V, IDS = 25A Ã
IDSS Zero Gate Voltage Drain Current — — 25 VDS= 160V ,VGS = 0V
— — 250 VDS = 160V,
VGS = 0V, TJ = 125°C
IGSS Gate-to-Source Leakage Forward — — 100 VGS = 20V
IGSS Gate-to-Source Leakage Reverse — — -100 VGS = -20V
QgTotal Gate Charge — — 290 VGS =12V, ID =35A
Qgs Gate-to-Source Charge — — 42 nC VDS = 100V
Qgd Gate-to-Drain (‘Miller’) Charge — — 120
td(on) Turn-On Delay Time — — 50 VDD = 100V, ID =35A
trRise Time — — 200 VGS =12V, RG = 2.35Ω
td(off) Turn-Off Delay Time — — 200
tfFall Time — — 130
LS + LDTotal Inductance — 6.8 —
Ciss Input Capacitance — 5300 — VGS = 0V, VDS = 25V
C
oss Output Capacitance — 1200 — pF f = 1.0MHz
Crss Reverse Transfer Capacitance — 360 —
nA
Ã
nH
ns
µA
*Current limited by package
Measured from Drain lead (6mm /0.25in
from package) to Source lead (6mm /0.25in.
from package) with Source wires internally
bonded from Source Pin to Drain Pad