DU06S/D Series
6W DC/DC CONVERTER, DIP-Package, High Isolation
DS_DU06S/D_07192012 E-mail: DCDC@delta.com.tw
http://www.delta.com.tw/dcdc
P1
FEATURES
Efficiency up to 80%
Reinforced Insulation rated for 300VAC Working
Voltage
Isolation Voltage 4,000VACrms
UL/EN60601-1&EN60950-1 Safety Approval
Overload Protection
Fully regulated Output Voltage
Low Leakage Current
Operating Temperature Range –40°C to +75 °C
Complies with EN55022, class A
3 Years Product Warranty
The.DU06S/D series are miniature, DIP Package, isolated 6W DC/DC converters with 4,000VACrms isolation. It offers short
circuit protection and allows a wide operating temperature range of –40°C to +75°C. These isolated DC/DC converters are the latest
offering from a world leader in power systems technology and manufacturing ― Delta Electronics, Inc. With creative design
technology and optimization of component placement, these converters possess outstanding electrical and thermal performance, as
well as extremely high reliability under highly stressful operating conditions..
Model List
Output Current Input Current Efficiency
(typ.)
Input
Voltage
(Range)
Output
Voltage
Max. Min. @Max. Load @No Load
Reflected
Ripple
Current
Max. capacitive
Load
@Max. Load
Model
Number
VDC VDC mA mA mA(typ.) mA(typ.) mA (typ.) uF %
DU06S1205A 5 1000 200 570 1000 75
DU06S1212A 12 500 100 641 470 78
DU06D1212A ±12 ±250 ±50 641 220* 78
DU06D1215A
12
(9 ~ 18)
±15 ±200 ±40 641
30 60
220* 78
DU06S2405A 5 1000 200 278 1000 77
DU06S2412A 12 500 100 313 470 80
DU06D2412A ±12 ±250 ±50 313 220* 80
DU06D2415A
24
(18 ~ 36)
±15 ±200 ±40 313
20 30
220* 80
DU06S4805A 5 1000 200 139 1000 77
DU06S4812A 12 500 100 156 470 80
DU06D4812A ±12 ±250 ±50 156 220* 80
DU06D4815A
48
(36 ~ 75)
±15 ±200 ±40 156
10 15
220* 80
* For each output
Input Cha rac teri stic s
Parameter Model Min. Typ. Max. Unit
12V Input Models -0.7 --- 25
24V Input Models -0.7 --- 50
Input Surge Voltage (1 sec. max.)
48V Input Models -0.7 --- 100
12V Input Models 7 8 9
24V Input Models 13 15 18
Start-Up Voltage
48V Input Models 30 33 36
12V Input Models --- --- 8.5
24V Input Models --- --- 16
Under Voltage Shutdown
48V Input Models --- --- 34
VDC
Short Circuit Input Power --- --- 3000 mW
Internal Power Dissipation --- --- 2500 mW
Conducted EMI
All Models
Compliance to EN55022,class A and FCC part 15,class A
DS_DU06S/D_07192012 E-mail: DCDC@delta.com.tw
http://www.delta.com.tw/dcdc P2
Output Characteristics
Parameter Conditions Min. Typ. Max. Unit
Output Voltage Accuracy --- ±0.5 ±1.0 %
Output Voltage Balance Dual Output, Balanced Loads --- ±0.5 ±2.0 %
Line Regulation Vin=Min. to Max. --- ±0.3 ±0.5 %
Load Regulation Io=25% to 100% --- ±0.5 ±1.0 %
5V Output Models --- 75 100 mV P-P
Ripple & Noise (20MHz) Other Output Models --- 100 150 mV P-P
Ripple & Noise (20MHz) Over Line, Load & Temp. --- --- 180 mV P-P
Ripple & Noise (20MHz) --- --- 25 mV rms
Transient Recovery Time --- 300 500 uS
Transient Response Deviation 25% Load Step Change --- ±3 ±6 %
Temperature Coefficient --- ±0.02 ±0.05 %/℃
Over Load Protection Foldback 120 150 --- %
Short Circuit Protection Continuous
Isolation, Safety Standards
Parameter Conditions Min. Typ. Max. Unit
I/O Isolation Voltage (rated) 60 Seconds 4000 --- --- VACrms
I/O Isolation Test Voltage Flash tested for 1 Second 6000 --- --- VPK
Leakage Current 240VAC, 60Hz --- --- 2 uA
I/O Isolation Resistance 500 VDC 10 --- --- GΩ
I/O Isolation Capacitance 100KHz, 1V --- 7 13 pF
cUL/UL60950-1, CSA C22.2 No. 60950-1-03
UL60601-1,CSA C22.2 No.601-1,
Safety Standards
IEC/EN 60950-1, IEC/EN 60601-1
IEC60950-1 CB report, cUL/UL 60950-1 certificate
Safety Approvals UL60601-1 UL certificate
General Characteristi c s
Parameter Conditions Min. Typ. Max. Unit
Switching Frequency --- 150 --- KHz
MTBF(calculated) MIL-HDBK-217F@25℃, Ground
Benign 700,000 --- --- Hours
Recommended Input Fuse
12V Input Models 24V Input Models 48V Input Models
1200mA Slow-Blow Type 600mA Slow-Blow Type 300mA Slow-Blow Type
Environmental Characteristics
Parameter Conditions Min. Max. Unit
Operating Temperature Range (with
Derating)
Ambient -40 +75 ℃
Case Temperature --- +95 ℃
Storage Temperature Range -50 +125 ℃
Humidity (non condensing) --- 95 % rel. H
Cooling Free-Air convection
Lead Temperature (1.5mm from case for
10Sec.) --- 260 ℃
DS_DU06S/D_07192012 E-mail: DCDC@delta.com.tw
http://www.delta.com.tw/dcdc P3
Power Dera ti ng Curve
Output Power (%)
Notes
1 Specifications typical at Ta=+25℃, resistive load, nominal input voltage and rated output current unless otherwise noted.
2 Transient recovery time is measured to within 1% error band for a step change in output load of 75% to 100%.
3 Ripple & Noise measurement bandwidth is 0-20 MHz.
4 These power converters require a minimum output loading to maintain specified regulation, operation under no-load conditions will
not damage these modules; however, they may not meet all specifications listed.
5 All DC/DC converters should be externally fused at the front end for protection.
6 Specifications subject to change without notice.
Mechancial Drawing
Mechanical Dimensions Pin Connections
Pin Single Output Dual Output
1 +Vin +Vin
11 No Pin Common
12 -Vout No Pin
13 +Vout -Vout
15 No Pin +Vout
23 -Vin -Vin
24 -Vin -Vin
►All dimensions in mm (inches)
►Tolerance: X.X±0.25 (X.XX±0.01)
X.XX±0.13 ( X.XXX±0.005)
►Pin diameter ⇔ 0.6 ±0.05 (0.024±0.002)
Physical Outline
Case Size : 31.8x20.3x12.0mm (1.25x0.8x0.47 Inches)
Case Material : Non-Conductive Black Plastic (flammability to UL 94V-0 rated)
Weight : 18g
Bottom View
11
131524
20.32 [0.80]
31.8 [1.25]
15.22 [0.60]
20.3 [0.80]
12.0 [0.47]
0.60 [0.024]
5.08
[0.20]
3.8
[0.15]
23
2.54
[0.10]
12
0.5 [0.02]
2.0
[0.08]
1
2.54
[0.10]
DS_DU06S/D_07192012 E-mail: DCDC@delta.com.tw
http://www.delta.com.tw/dcdc P4
Part Numbering System
D U 06 S 12 05 A
Form factor Family series Watt Number of
Outputs Input Voltage Output Voltage Option Code
D-DIP A~Z 01:1W S - Single 03:3.3V 03:3.3V A - Std. Functions
P-SIP 02:2W D- Dual 05: 5V 05: 5V
S-SMD 03:3W 12:12V 12:12V
04:4W 24: 24V 15: 15V
06:6W 48:48V 24: 24V
WARRANTY
Delta offers a three(3) years limited warranty. Complete warranty information is listed on our web site or is available upon request from Delta.
Information furnished by Delta is believed to be accurate and reliable. However, no responsibility is assumed by Delta for its use, nor for any
infringements of patents or other rights of third parties, which may result from its use. No license is granted by implication or otherwise under
any patent or patent rights of Delta. Delta reserves the right to revise these specifications at any time, without notice.
