R.47 X2 CLASS (IEC 60384-14) - MKP Series MEtaLLIZED pOLyPROPYLENE fILM capacItOr SELF-HEALING PROPERTIES Taped Loose Fig.1 Fig.2 Typical applications: interference suppression and across-the-line applications. Suitable for use in situations where failure of the capacitor would not lead to danger of electric shock. PRODUCT CODE: R47 O d 0.05 p 15 22.5 p 27.5 p = 37.5 0.6 or 0.8* 0.8 1.0 *See size table. All dimensions are in mm. Temperature: Relative humidity (RH): Test duration: Winding: non-inductive type. Leads: tinned wire. Protection: plastic case, thermosetting resin filled. Box material is solvent resistant and flame retardant according to UL94 V0. +40C 2C 93% 2% 56 days +60C 2C 95% 2% 500 hours Performance Operating temperature range: -40 to +110C Related documents: IEC 60384-14; EN 60384-14. Endurance: Test conditions Temperature: Test duration: Voltage applied: Capacitance values: E6 series (IEC 60063 Norm). Capacitance tolerances (measured at 1 kHz): 10% (K); 20% (M). Tolerance 5% (J) available upon request. Dissipation factor (DF): tg x 10-4 at +25C 5C: 10 (6)* at 1kHz* Typical value L +0.2 L +0.3 L +0.5 L +0.3 L +0.3 L +0.3 Dielectric strength: no dielectric breakdown or flashover at 4.3 x VR (d.c.)/1 min Capacitance change |C/C|: 5% Insulation resistance: 50% of initial limit. Climatic category: 40/110/56 IEC 60068-1 4700pF to 2.2F H +0.1 H +0.1 H +0.1 H +0.1 H +0.1 H +0.1 Test conditions 2nd Temperature: Relative humidity (RH): Test duration: Marking: Manufacturer's logo, series, capacitance, tolerance, rated voltage, capacitor class, dielectric code, climatic category, passive flammability category, manufacturing date code, approvals, manufacturing plant. Capacitance range: B +0.2 B +0.2 B +0.2 B +0.2 B +0.2 B +0.3 All <7.5 7.5 All All All Test conditions 1st Plates: metal layer deposited by evaporation under vacuum. 440Vac / 1000Vdc; 50/60Hz 10.0 15.0 15.0 22.5 27.5 37.5 Damp heat, steady state: Dielectric: polypropylene film - 2 sections. Rated voltage (VR): Maximum dimensions (mm) B max H max L max tEst MEthOD aND pErfOrMaNcE GENERAL TECHNICAL DATA ELEctrIcaL charactErIstIcs Pitch Box thickness (B) (mm) (mm) +110C 2C 1000 h 1.25 x VR +1000Vac 0.1 s/h Performance Dielectric strength: no dielectric breakdown or flashover at 4.3 x VR (d.c.)/1 min Capacitance change |C/C|: 10% Insulation resistance: 50% of initial limit. Resistance to soldering heat: Test conditions Insulation resistance: Solder bath temperature: +260C 5C Dipping time (with heat screen):10 s 1 s Test conditions Temperature: Voltage charge time: Voltage charge: +25C5C 1 min 100 Vdc Performance 1x105 M 30000 s for C0.33F for C>0.33F Performance Capacitance change |C/C|: 2% Winding scheme Test voltage between terminations (on all pieces): 1700Vac for 1 s + 2700Vdc for 1 s at +25C5C single sided metallized polypropylene film 2 sections 159 09/2008 R.47 X2 CLASS (IEC60384-14) - MKP Series MEtaLLIZED pOLyPROPYLENE fILM capacItOr SELF-HEALING PROPERTIES PRODUCT CODE: R47 Rated Cap. Od 440 Vac / 1000 Vdc Std dimensions B H L p Max dv/dt at 420Vdc Part Number APPROVALS (V/ s) 4700 pF 4.0 9.0 13.0 10.0 0.6 750 R474F 1470 - - 01 - 6800 pF 5.0 11.0 13.0 10.0 0.6 750 R474F 1680 - - 01 - 8200 pF 6.0 12.0 13.0 10.0 0.6 750 R474F 1820 - - 01 - 0.010 F 6.0 12.0 13.0 10.0 0.6 750 R474F 2100 - - 01 - 0.010 F 5.0 11.0 18.0 15.0 0.6 600 R474I 2100 - - 01 - 0.012 F 5.0 11.0 18.0 15.0 0.6 600 R474I 2120 - - 01 - 0.015 F 5.0 11.0 18.0 15.0 0.6 600 R474I 2150 - - 01 - 0.018 F 5.0 11.0 18.0 15.0 0.6 600 R474I 2180 - - 01 - 0.022 F 6.0 12.0 18.0 15.0 0.6 600 R474I 2220 - - 01 - 0.027 F 6.0 12.0 18.0 15.0 0.6 600 R474I 2270 - - 01 - 0.033 F 6.0 12.0 18.0 15.0 0.6 600 R474I 2330 - - 01 - 0.039 F 7.5 13.5 18.0 15.0 0.6 600 R474I 2390 - - 01 - 0.047 F 7.5 13.5 18.0 15.0 0.6 600 R474I 2470 - - 01 - 0.047 F 6.0 17.5 18.0 15.0 0.6 600 R474I 2470 - - 02 - 0.047 F 9.0 12.5 18.0 15.0 0.6 600 R474I 2470 - - 03 - 0.056 F 8.5 14.5 18.0 15.0 0.6 600 R474I 2560 - - 01 - 0.068 F 10.0 16.0 18.0 15.0 0.8 600 R474I 2680 - - 01 - 0.068 F 7.5 18.5 18.0 15.0 0.8 600 R474I 2680 - - 02 - 0.068 F 13.0 12.0 18.0 15.0 0.8 600 R474I 2680 - - 03 - 0.082 F 10.0 16.0 18.0 15.0 0.8 600 R474I 2820 - - 01 - 0.10 F 11.0 19.0 18.0 15.0 0.8 600 R474I 3100 - - 01 - 0.047 F 6.0 15.0 26.5 22.5 0.8 300 R474N 2470 - - 01 - 0.047 F 6.5 13.5 26.5 22.5 0.8 300 R474N 2470 - - 02 - 0.068 F 6.0 15.0 26.5 22.5 0.8 300 R474N 2680 - - 01 - 0.10 F 7.0 16.0 26.5 22.5 0.8 300 R474N 3100 - - 01 - 0.12 F 8.5 17.0 26.5 22.5 0.8 300 R474N 3120 - - 01 - 0.15 F 10.0 18.5 26.5 22.5 0.8 300 R474N 3150 - - 01 - 0.18 F 10.0 18.5 26.5 22.5 0.8 300 R474N 3180 - - 01 - 0.22 F 11.0 20.0 26.5 22.5 0.8 300 R474N 3220 - - 01 - 0.27 F 13.0 22.0 26.5 22.5 0.8 300 R474N 3270 - - 01 - 0.33 F 13.0 22.0 26.5 22.5 0.8 300 R474N 3330 - - 01 - 0.15 F 9.0 17.0 32.0 27.5 0.8 225 R474R 0.18 F 9.0 17.0 32.0 27.5 0.8 225 R474R 0.22 F 9.0 17.0 32.0 27.5 0.8 225 R474R 3220 - - 01 - 0.27 F 9.0 17.0 32.0 27.5 0.8 225 R474R 3270 - - 02 - 0.33 F 11.0 20.0 32.0 27.5 0.8 225 R474R 3330 - - 02 - 0.39 F 11.0 20.0 32.0 27.5 0.8 225 R474R 3390 - - 01 - 0.47 F 13.0 22.0 32.0 27.5 0.8 225 R474R 3470 - - 01 - 0.56 F 13.0 22.0 32.0 27.5 0.8 225 R474R 3560 - - 01 - 0.68 F 14.0 28.0 32.0 27.5 0.8 225 R474R 3680 - - 01 - 0.82 F 18.0 33.0 32.0 27.5 0.8 225 R474R 3820 - - 01 - 1.0 F 18.0 33.0 32.0 27.5 0.8 225 R474R 4100 - - 01 - 1.2 F 18.0 33.0 32.0 27.5 0.8 225 R474R 4120 - - 01 - 1.5 F 22.0 37.0 32.0 27.5 0.8 225 R474R 4150 - - 01 - 0.47 F 11.0 22.0 41.5 37.5 1.0 150 R474W 3470 - - 01 - 0.56 F 11.0 22.0 41.5 37.5 1.0 150 R474W 3560 - - 01 - 0.68 F 13.0 24.0 41.5 37.5 1.0 150 R474W 3680 - - 01 - 0.82 F 16.0 28.5 41.5 37.5 1.0 150 R474W 3820 - - 01 - 1.0 F 16.0 28.5 41.5 37.5 1.0 150 R474W 4100 - - 01 - 1.2 F 19.0 32.0 41.5 37.5 1.0 150 R474W 4120 - - 01 - 1.5 F 19.0 32.0 41.5 37.5 1.0 150 R474W 4150 - - 01 - 1.8 F 20.0 40.0 41.5 37.5 1.0 150 R474W 4180 - - 01 - 2.2 F 20.0 40.0 41.5 37.5 1.0 150 R474W 4220 - - 01 - (*) Class X2 File No. CA08.00101 UL 1414 up to 1F, 85C; 250Vac) Across-the-line File No. E97797 Electromagnetic Interference Filters File No. E85238 UL 1283 Approved according to IEC 60384-14 According to IEC 60065. (*)ENEC mark has replaced all the following European National marks: Table 1 Standard packaging style Lead length Taping style Ordering code (Digit 10 to 11) P2 (mm) Fig. (No.) Pitch (mm) AMMO-PACK AMMO-PACK 12.70 19.05 1 2 10.0/15.0 22.5 DQ DQ 3150 - - 01 - REEL O500mm 3180 - - 01 - REEL O500mm 12.70 19.05 1 2 10.0/15.0 22.5/27.5 CK CK (mm) Loose, short leads Loose, long leads Loose, long leads 04 +2 25 -1/+2 30 +5 00 50 40 Note: Ammo-pack is the preferred packaging for taped version. Mechanical version and packaging (Table 1) Tolerance: K (10%); M (20%) All dimensions are in mm 09/2008 ENEC IEC 60384-14 160 R.47 X1 CLASS (IEC 60384-14) - MKP Series Taped Loose Fig.1 O d 0.05 MEtaLLIZED pOLyPROPYLENE fILM capacItOr SELF-HEALING PROPERTIES Fig.2 p 15 22.5 p 27.5 p = 37.5 0.6 or 0.8* 0.8 1.0 Typical applications: interference suppression and acrossthe-line applications. Suitable for use in situations where failure of the capacitor would not lead to danger of electric shock. Class X1 shall be applied for permanently connected apparatus. Note: PErMaNENtLy cONNEctED apparatus: apparatus which is intended for connection to the mains by a connection which cannot be loosened BY HAND. BY HAND: operation that does not require the use of any object such a tool, coin, etc. PRODUCT CODE: R47 *See size table. All dimensions are in mm. GENERAL TECHNICAL DATA Dielectric: polypropylene film - 2 sections. Plates: metal layer deposited by evaporation under vacuum. Winding: non-inductive type. Pitch Box thickness (B) (mm) (mm) Maximum dimensions (mm) B max H max L max 10.0 15.0 15.0 22.5 27.5 37.5 B +0.2 B +0.2 B +0.2 B +0.2 B +0.2 B +0.3 All <7.5 7.5 All All All H +0.1 H +0.1 H +0.1 H +0.1 H +0.1 H +0.1 Leads: tinned wire. tEst MEthOD aND pErfOrMaNcE Protection: plastic case, thermosetting resin filled. Box material is solvent resistant and flame retardant according to UL94 V0. Damp heat, steady state: Test conditions 1st Temperature: Relative humidity (RH): Test duration: Marking: Manufacturer's logo, series, capacitance, tolerance, rated voltage, capacitor class, dielectric code, climatic category, passive flammability category, manufacturing date code, approvals, manufacturing plant. Temperature: Relative humidity (RH): Test duration: Operating temperature range: -40 to +110C Related documents: IEC 60384-14; EN60384-14 440Vac / 1000Vdc; 50/60Hz 4700pF to 2.2F Dielectric strength: no dielectric breakdown or flashover at 4.3 x VR (d.c.)/1 min Capacitance change |C/C|: 5% Insulation resistance: 50% of initial limit. Capacitance values: E6 series (IEC 60063 Norm). Capacitance tolerances (measured at 1 kHz): 10% (K); 20% (M); Tolerance 5% (J) available upon request. Endurance: Test conditions Temperature: Test duration: Voltage applied: Dissipation factor (DF): tg x 10-4 at +25C 5C: 10 (6)* at 1kHz* Typical value Performance no dielectric breakdown or flashover at 4.3 x VR (d.c.)/1 min Capacitance change |C/C|: 10% Insulation resistance: 50% of initial limit. Test conditions Performance 1x105 M 30000 s +25C5C 1 min 100 Vdc +110C 2C 1000 h 1.25 x VR +1000Vac 0.1 s/h Dielectric strength: Insulation resistance: Temperature: Voltage charge time: Voltage charge: +60C 2C 95% 2% 500 hours Performance ELEctrIcaL charactErIstIcs Rated voltage (VR): +40C 2C 93% 2% 56 days Test conditions 2nd Climatic category: 40/110/56 IEC 60068-1 Capacitance range: L +0.2 L +0.3 L +0.5 L +0.3 L +0.3 L +0.3 Resistance to soldering heat: Test conditions Solder bath temperature: +260C 5C Dipping time (with heat screen):10 s 1 s for C0.33F for C>0.33F Performance Test voltage between terminations (on all pieces): 1700Vac for 1 s + 2700Vdc for 1 s at +25C5C Capacitance change |C/C|: 2% 161 09/2008 R.47 X1 CLASS (IEC 60384-14) - MKP Series MEtaLLIZED pOLyPROPYLENE fILM capacItOr SELF-HEALING PROPERTIES PRODUCT CODE: R47 APPROVALS Rated Cap. Od 440 Vac / 1000 Vdc Std dimensions B H L p Max dv/dt at 420Vdc Part Number (*) (V/ s) 4700 pF 4.0 9.0 13.0 10.0 0.6 750 R474F 1470 - - A1 - 6800 pF 5.0 11.0 13.0 10.0 0.6 750 R474F 1680 - - A1 - 8200 pF 6.0 12.0 13.0 10.0 0.6 750 R474F 1820 - - A1 - 0.010 F 6.0 12.0 13.0 10.0 0.6 750 R474F 2100 - - A1 - 0.010 F 5.0 11.0 18.0 15.0 0.6 600 R474I 2100 - - A1 - 0.012 F 5.0 11.0 18.0 15.0 0.6 600 R474I 2120 - - A1 - 0.015 F 5.0 11.0 18.0 15.0 0.6 600 R474I 2150 - - A1 - 0.018 F 5.0 11.0 18.0 15.0 0.6 600 R474I 2180 - - A1 - 0.022 F 6.0 12.0 18.0 15.0 0.6 600 R474I 2220 - - A1 - 0.027 F 6.0 12.0 18.0 15.0 0.6 600 R474I 2270 - - A1 - 0.033 F 6.0 12.0 18.0 15.0 0.6 600 R474I 2330 - - A1 - 0.039 F 7.5 13.5 18.0 15.0 0.6 600 R474I 2390 - - A1 - 0.047 F 7.5 13.5 18.0 15.0 0.6 600 R474I 2470 - - A1 - 0.047 F 6.0 17.5 18.0 15.0 0.6 600 R474I 2470 - - A2 - 0.047 F 9.0 12.5 18.0 15.0 0.6 600 R474I 2470 - - A3 - 0.056 F 8.5 14.5 18.0 15.0 0.6 600 R474I 2560 - - A1 - 0.068 F 10.0 16.0 18.0 15.0 0.8 600 R474I 2680 - - A1 - 0.068 F 7.5 18.5 18.0 15.0 0.8 600 R474I 2680 - - A2 - 0.068 F 13.0 12.0 18.0 15.0 0.8 600 R474I 2680 - - A3 - 0.082 F 10.0 16.0 18.0 15.0 0.8 600 R474I 2820 - - A1 - 0.10 F 11.0 19.0 18.0 15.0 0.8 600 R474I 3100 - - A1 - 0.047 F 6.0 15.0 26.5 22.5 0.8 300 R474N 2470 - - A1 - 0.047 F 6.5 13.5 26.5 22.5 0.8 300 R474N 2470 - - A2 - 0.068 F 6.0 15.0 26.5 22.5 0.8 300 R474N 2680 - - A1 - 0.10 F 7.0 16.0 26.5 22.5 0.8 300 R474N 3100 - - A1 - 0.12 F 8.5 17.0 26.5 22.5 0.8 300 R474N 3120 - - A1 - 0.15 F 10.0 18.5 26.5 22.5 0.8 300 R474N 3150 - - A1 - 0.18 F 10.0 18.5 26.5 22.5 0.8 300 R474N 0.22 F 11.0 20.0 26.5 22.5 0.8 300 R474N 0.27 F 13.0 22.0 26.5 22.5 0.8 300 R474N 3270 - - A1 - 0.33 F 13.0 22.0 26.5 22.5 0.8 300 R474N 3330 - - A1 - 0.15 F 9.0 17.0 32.0 27.5 0.8 225 R474R 3150 - - A1 - 0.18 F 9.0 17.0 32.0 27.5 0.8 225 R474R 3180 - - A1 - 0.22 F 9.0 17.0 32.0 27.5 0.8 225 R474R 3220 - - A1 - 0.27 F 9.0 17.0 32.0 27.5 0.8 225 R474R 3270 - - A2 - 0.33 F 11.0 20.0 32.0 27.5 0.8 225 R474R 3330 - - A2 - 0.39 F 11.0 20.0 32.0 27.5 0.8 225 R474R 3390 - - A1 - 0.47 F 13.0 22.0 32.0 27.5 0.8 225 R474R 3470 - - A1 - 0.56 F 13.0 22.0 32.0 27.5 0.8 225 R474R 3560 - - A1 - 0.68 F 14.0 28.0 32.0 27.5 0.8 225 R474R 3680 - - A1 - 0.82 F 18.0 33.0 32.0 27.5 0.8 225 R474R 3820 - - A1 - 1.0 F 18.0 33.0 32.0 27.5 0.8 225 R474R 4100 - - A1 - 1.2 F 18.0 33.0 32.0 27.5 0.8 225 R474R 4120 - - A1 - ENEC IEC 60384-14 Class X1 File No. CA08.00101 UL 1414 up to 1F, 85C; 250Vac) Across-the-line File No. E97797 Electromagnetic Interference Filters File No. E85238 UL 1283 Approved according to IEC 60384-14 According to IEC 60065. (*)ENEC mark has replaced all the following European National marks: Table 1 Standard packaging style Lead length Taping style Ordering code (Digit 10 to 11) P2 (mm) Fig. (No.) Pitch (mm) AMMO-PACK AMMO-PACK 12.70 19.05 1 2 10.0/15.0 22.5 DQ DQ 3180 - - A1 - REEL O500mm 3220 - - A1 - REEL O500mm 12.70 19.05 1 2 10.0/15.0 22.5/27.5 CK CK 1.5 F 22.0 37.0 32.0 27.5 0.8 225 R474R 4150 - - A1 - 0.47 F 11.0 22.0 41.5 37.5 1.0 150 R474W 3470 - - A1 - 0.56 F 11.0 22.0 41.5 37.5 1.0 150 R474W 3560 - - A1 - 0.68 F 13.0 24.0 41.5 37.5 1.0 150 R474W 3680 - - A1 - 0.82 F 16.0 28.5 41.5 37.5 1.0 150 R474W 3820 - - A1 - 1.0 F 16.0 28.5 41.5 37.5 1.0 150 R474W 4100 - - A1 - 1.2 F 19.0 32.0 41.5 37.5 1.0 150 R474W 4120 - - A1 - 1.5 F 19.0 32.0 41.5 37.5 1.0 150 R474W 4150 - - A1 - 1.8 F 20.0 40.0 41.5 37.5 1.0 150 R474W 4180 - - A1 - 2.2 F 20.0 40.0 41.5 37.5 1.0 150 R474W 4220 - - A1 - (mm) Loose, short leads Loose, long leads Loose, long leads 00 50 40 04 +2 25 -1/+2 30 +5 Note: Ammo-pack is the preferred packaging for taped version. Winding scheme single sided metallized polypropylene film 2 sections Mechanical version and packaging (Table 1) Tolerance: K (10%); M (20%) All dimensions are in mm Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute - and we specifically disclaim - any warranty concerning suitability for a specific customer application or use. This Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by us with reference to the use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained.