Binder Caption: AC/DC 07/08/99 Made in Canada
500W, SINGLE-OUTPUT, HIGH VOLTAGE POWER SUP PLY
HVC319 SERIES - ENCLOSED CASE
• Compact size -13.824” x 5.10” x 2.412”
• Single regulated and adjustable output
• 500W output power with convection cooling
• Full electronic protection
• Telecom quality
• Field-proven design
• Also available as plug-in module
• N+1 redundancy available
The HVC319 Series of AC/DC converters uses a field-proven high frequency conversion technology to generate 500W
output power at high DC voltage with convection cooling. Output voltages from 60V to 300VDC are available. This low
profile design features low component count and high efficiency. The use of high quality components and rigorous quality
control results in an MTBF exceeding 100,000 hours at 45oC.
SPECIFICATIONS
Input Volta ge
115/230VAC +/- 15%
47 - 63Hz
Input Protection
Thermal Fuse
Inr ush current limiting
Input Isolation
2250VDC input to chassis
4300VDC input to output,
8mm spacing
500VDC output to chassis
Full compliance to IEC950, CSA
22-2-950 and UL 1950
Please contact factory for approval
status for the requested
input/output configuration
Output Volta ges
120VDC/4A and 240VDC/ 2A are
standard
Consult fac tory for other volta ges
Line/Load Regulation
+/-1% combined
Output Overvoltage Protection
Double regulator loop
Overload Protection
Current limiting with short circuit
protection
Self-resetting th ermostat for
th er mal protect ion
Efficiency
Min 85% at full load
RFI Suppression
Meets FCC 20780 Class A
and EN 55022 Class A
conducted emissions
Output Ripple/Noise
Better tha n 1% of outp ut voltage
peak to peak or 0.2% RMS of the
output voltage (20HZ BW)
Hold Up Time
Minimum 10ms at full load for 5%
drop of outp ut voltage
Operating Temperature
0 to +50oC with convection
cooling. Extended temperature
range available
Temperature Drift
0.03% per oC over operating
temperature r ange
Dimensions
‘F4’ Package:
13.824”x 5.1” x 2.412”
Connections:
Screw type terminal block
For other connectors please
consult factory
Warranty
Twelve months subject to
application within good
engi neering practice
Enhancements to these general specifications and customizing can be accommodated upon request
Designed to meet all approval requirements
Designer and manufacturer of quality converters, inverters, UPS systems, complete rack mount systems
and DC-input fluorescent lamp inverters since 1982. Custom or standard.
Absopulse is a BAB T-a pproved Facility
ABSOPULSE ELECTRONICS LTD
110 Walgreen Road
Carp, Ontario K0A 1L0 CANADA
Tel: (613) 836-3511 Fax: (613) 836-7488 E-mail: absopulse@absopulse.com
Visit us at www. absop ulse.co m
