Iridium Patch Antenna APAE1621R2540ABDD1-T RoHS/ RoHS II compliant 25.0 x 25.0 x 4.0mm MSL level: Not Applicable FEATURES: * High Gain * Compact Size and Low profile * Pin with Tape Mount * Customization Available * RoHS Compliance TYPICAL APPLICATIONS: * Global Mobile Satellite Voice and Data * Iridium Global Calls STANDARD SPECIFICATIONS: Parameters Center Frequency -10dB Bandwidth Min. Typ. Max. 16213.0 9 Impedance Polarization Model Frequency Temperature Coefficient Note (Without adhesive tape on 27x27mm ground plane) MHz VSWR Gain Units MHz 1.5 (@ Center Frequency) 4 dBic 50 RHCP (@ Zenith, typical on 70*70mm ground plane) (Right Hand Circular Polarization) 20 ppm/C Test Conditions and Test Setup: Parts shall be measured under a condition (Temp.: 2015C, Humidity: 6520% R.H.) TEST JIG: SMA ABRACON IS ISO9001:2008 CERTIFIED CERTIFIED LLC 2 Faraday, Suite# B | Irvine | CA 92618 Revised: 12.10.15 Ph. 949.546.8000 | Fax. 949.546.8001 Visit www.abracon.com for Terms and Conditions of Sale Iridium Patch Antenna APAE1621R2540ABDD1-T RoHS/ RoHS II compliant 25.0 x 25.0 x 4.0mm IMPEDANCE CHARACTERISTICS Tested on 27x27mm GND Plane OUTLINE DRAWING: adhesive tape 0.8 2.50.1 25.00.3 4-R4.0 0.6max 4.0 0.1 1.90.3 25.00.3 Dimension: mm ABRACON IS ISO9001:2008 CERTIFIED CERTIFIED LLC 2 Faraday, Suite# B | Irvine | CA 92618 Revised: 12.10.15 Ph. 949.546.8000 | Fax. 949.546.8001 Visit www.abracon.com for Terms and Conditions of Sale Iridium Patch Antenna APAE1621R2540ABDD1-T RoHS/ RoHS II compliant 25.0 x 25.0 x 4.0mm PACKAGING: "T" is for a vacuum sealed tray containing 50 units. Each vacuum bag contains 5 trays. 1000 pieces is the suggested quantity containing -20 trays with 50-pcs per Tray. NOTE: This product is vacuum packaged to reduce the possibility of oxidation and/or contamination during storage. 8 3,6 5 NO. 1 1 7 4 2 2 Package 3 4 Vacuum Bag Certificate of approval 5 Label 6 7 Cushion Tray 8 Adhesive tape 1 4 2 3 1 20 4 5 Name Inner Box 1 5 6 7 24 4 8 3.5 Inner box Dimensions CAUTION: (1) Do not apply excess mechanical stress to the component body or terminations. Do not attempt to re-form or bend the components as this will cause damage to the component. (2) Do not expose the component to open flame. (3) This specification applies to the functionality of the component as a single unit. Please insure the component is thoroughly evaluated in the application circuit. NOTE: 1) The parts are manufactured in accordance with this specification. If other conditions and specifications which are required for this specification, please contact ABRACON for more information. 2) ABRACON will supply the parts in accordance with this specification unless we receive a written request to modify prior to an order placement. 3) In no case shall ABRACON be liable for any product failure from in appropriate handling or operation of the item beyond the scope of this specification. 4) When changing your production process, please notify ABRACON immediately. 5) ABRACON Corporation's products are COTS - Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. ABRACON's products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from ABRACON Corporation is required. Please contact ABRACON Corporation for more information. 6) All specifications and Marking will be subject to change without notice. ATTENTION: Abracon Corporation's products are COTS - Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon's products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ISO9001:2008 CERTIFIED CERTIFIED LLC 2 Faraday, Suite# B | Irvine | CA 92618 Revised: 12.10.15 Ph. 949.546.8000 | Fax. 949.546.8001 Visit www.abracon.com for Terms and Conditions of Sale