62-18
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
© 2012 Glenair, Inc. Printed in U.S.A.CAGE Codes 06324
www.glenair.com E-Mail: sales@glenair.com
62
Strain Reliefs
AS85049/47 and MS27507
90° Strain Relief
Self-Locking or Non-Self-Locking
A Thread F
H
Cable
Entry
G
E
Self-Locking
Only
TABLE I: Shell Size, Cable Entry and Backshell Dimensions
Dash
No.
Shell Size
Ref.
A Thread
Class 2B
Ø E
Max
F
Max
G
Max
H
Max
Cable Entry
Min Max
A 8/9 .438 - 28 UNEF .86 (21.8) 1.38 (35.1) 1.00 (25.4) .85 (21.6) .098 (2.5) .234 (5.9)
10 10/11 .562 - 24 UNEF .98 (24.9) 1.38 (35.1) 1.10 (27.9) .90 (22.9) .153 (3.9) .234 (5.9)
12 12/13 .688 - 24 UNEF 1.16 (29.5) 1.46 (37.1) 1.10 (27.9) 1.10 (27.9) .190 (4.8) .328 (8.3)
14 14/15 .813 - 20 UNEF 1.28 (32.5) 1.63 (41.4) 1.25 (31.8) 1.15 (29.2) .260 (6.6) .457 (11.6)
16 16/17 .938 - 20 UNEF 1.41 (35.8) 1.80 (45.7) 1.30 (33.0) 1.30 (33.0) .283 (7.2) .614 (15.6)
18 18/19 1.063 - 18 UNEF 1.52 (38.6) 1.82 (46.2) 1.35 (34.3) 1.50 (38.1) .325 (8.3) .634 (16.1)
20 20/21 1.188 - 18 UNEF 1.64 (41.7) 1.90 (48.3) 1.60 (40.6) 1.60 (40.6) .343 (8.7) .698 (17.7)
22 22/23 1.313 - 18 UNEF 1.77 (45.0) 2.04 (51.8) 1.75 (44.5) 1.70 (43.2) .381 (9.7) .823 (20.9)
24 24/25 1.438 - 18 UNEF 1.89 (48.0) 2.15 (54.6) 1.85 (47.0) 1.80 (45.7) .418 (10.6) .853 (21.7)
CONNECTOR DESIGNATOR:
FMIL-DTL-27599,
MIL-DTL-38999 Series Series I & II Basic
Part Number
M85049/47 S W 10
Dash No.
Material and Finish Designator
N = Aluminum, Electroless Nickel
S = 300 Series Steel, Passivated
W = Aluminum, 1000 Hour Cadmium
Olive Drab over Electroless Nickel
S = Self-Locking
Omit for Non-Self-Locking
MS27507-B 10
Superseded PART NUMBER
Metal and Finish Designator
A = Aluminum Cadmium Olive Drab over Electroless Nickel
C = Aluminum, Cadmium Olive Drab
N = Aluminum, Electroless Nickel
D = 300 Series Steel, Cadmium Black Plate
S = 300 Series Steel, Passivate
Basic Part No.
(Non-Self-
Locking)
Dash No.
APPLICATION NOTES
1. Assembly to be identied with
manufacturer’s name and part
number, space permitting.
2. Cable Entry is dened as the
accommodation entry for the
wire bundle or cable.
3. Dimensions are not intended for
inspection criteria.
4. For complete dimensions, see the
applicable Military Specication.
5. Metric dimensions (mm) are in
parentheses.
FOR NEW DESIGN
USE AS85049/123