TLE 7201R
Never stop thinking.
PRODUCT BRIEF
Applications
Automotive Front-Door Modules
Automotive Body ECUs including
door functionality
Features
Full bridge (150 m) for main
doorlock motor
Two half-bridges (400 m) for
deadbolt and mirror position
motor or mirror fold motor
Two half-bridges (800 m) for
mirror position
High-side switch (100 m) for
mirror defrost
Four high-side switches (500 m)
for 5 W lamps
Analog current sense output
and build-in multiplexer to
reduce ADC-channels of
the microcontroller
All outputs with short circuit
protection and diagnosis
Over-temperature protection
with warning
Open load diagnosis for
all outputs
Charge-pump output for n-channel
MOSFET for reverse-polarity
protection
Very low current consumption in
sleep mode
Standard 16-bit SPI for control
and diagnosis
Over- and Undervoltage Lockout
Power-SO package with full-size
heatslug for excellent thermal
resistance
Pinning optimized for efficient
PCB layout
P-DSO-36-12
TLE 7201R
Power ASSP for
Automotive Door-Zone Modules
The TLE 7201R is an Application Specific Standard
Product (ASSP) for automotive door-module appli-
cations. It includes all the power stages necessary
to drive the loads in a typical front door application,
i.e. central lock, deadlock or mirror fold, mirror
position, mirror defrost and up to four 5 W lamps,
e.g for turn signal, courtesy/warning or control
panel illumination. It is designed as a monolithic
circuit, using Infineons mixed technology SPT
which combines bipolar and CMOS control circuitry
with DMOS power devices.
Short circuit and over-temperature protection and
a detailed diagnosis are in line with the safety
requirements of automotive applications. The
current sense output allows to improve the total
system performance. The standard SPI interface
saves microcontroller I/O lines while still giving
flexible control of the power stages and
a detailed diagnosis.
Published by Infineon Technologies AG
PRODUCT BRIEF
How to reach us:
http://www.infineon.com
Published by
Infineon Technologies AG,
St.-Martin-Strasse 53,
81669 München
© Infineon Technologies AG 2002. All Rights Reserved.
Attention please!
The information herein is given to describe certain components
and shall not be considered as warranted characteristics.
Terms of delivery and rights to technical change reserved.
We hereby disclaim any and all warranties, including but not
limited to warranties of non-infringement, regarding circuits,
descriptions and charts stated herein.
Infineon Technologies is an approved CECC manufacturer.
Information
For further information on technology, delivery terms
and conditions and prices please contact your nearest
Infineon Technologies Office in Germany or our
Infineon Technologies Representatives worldwide.
Warnings
Due to technical requirements components may contain dan-
gerous substances. For information on the types in question
please contact your nearest Infineon Technologies Office.
Infineon Technologies Components may only be used in life-
support devices or systems with the express written approval
of Infineon Technologies, if a failure of such components can
reasonably be expected to cause the failure of that life-support
device or system, or to affect the safety or effectiveness of that
device or system. Life-support devices or systems are intend-
ed to be implanted in the human body, or to support and/or
maintain and sustain and/or protect human life. If they fail, it is
reasonable to assume that the health of the user or other
persons may be endangered.
Besides the TLE 7201R, Infineon offers a broad range of products suitable for door-module application
Type Description Package
TLE 7201R
TLE 6266
TLE 6263
BTS 7740G
BTS 781GP
TLE 6208-3G
BTS 5210G
BTS 716G
TLE 4240
C164CM
XC164CS
TLE 49x5G
Power ASSP for lock, mirror and lamps
Door-Module System ASSP with CAN, V-reg and relay-driver
General purpose System Base Chip with CAN, V-reg and wake-inputs
H-bridge for door-lock
H-bridge for window-lift
Triple half-bridge for mirror position
2-Channel high-side switch for lamps, mirror heater
4-Channel high-side switch for lamps, mirror heater
LED-driver with current control and diagnosis
16-bit microcontroller with 32 K ROM/OTP, CAN
16-bit microcontroller with 64 - 128 K ROM/Flash, TwinCAN
Hall-switch for window-lift rotational indexing
P-DSO-36-12
P-DSO-28
P-DSO-28
P-DSO-28
P-TO263-15
P-DSO-14
P-DSO-14
P-DSO-20
P-DSO-8
P-TQFP-64
P-TQFP-100
SOT89
Block Diagram
Current
Sense
MUX
RevPol
MOS
Driver
Charge
Pump
Fault-
Detect
Inhibit
SPI
Bias
V
bat
To µ-Controller
PWM2
PWM1
DO
CLK
DI
CSN
V
CC
INH
ISO
OUT 8
OUT 9
OUT 10
OUT 11
10 W
5 W
5 W
GND
GO
T_RevPol
V
S
CP
Door
Lock
Dead
Bolt
OUT 1
OUT 2
OUT 3
OUT 4
OUT 5
OUT 6
OUT 7
Mirror x
Mirror
Fold
Mirror y
Mirror
Heat
16-Bit
Logic and Latch
100 k
Ordering No. B112-H8093-X-X-7600
Printed in Germany
PS 09022. NB