Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20181115
(1/4)
suppression-filter_commercial_vfs5045_en.fm
EMC Components
Noise suppression filter
For home appliances (conductive noise countermeasure)
VFS series
VFS5045 type
FEATURES
A compact noise suppression component for home appliances that accommodates high currents.
High magnetic shield construction achieved by a ferrite magnetic material and compatible with high-density mounting.
Operating temperature range: –40 to +105°C (including self-temperature rise)
APPLICATION
Refrigerators, air conditioners, washing machines, vacuum cleaners, TV
PART NUMBER CONSTRUCTION
CHARACTERISTICS SPECIFICATION TABLE
Measurement equipment
＊Equivalent measurement equipment may be used.
VFS 5045 V A 031
Series name L×W×H dimensions V: at 10MHz
S: at 1MHz Internal code Impedance
5.0×5.0×4.5 mm ()
Type Impedance DC resistance Rated current Part No.
()Typ. ()Min. ()typ. ()max. (A)max.
5045VA
[at 10MHz]
61 30 0.015 0.0195 5.1 VFS5045VA031
142 110 0.022 0.0286 4.7 VFS5045VA111
225 150 0.027 0.0351 4.2 VFS5045VA151
450 300 0.046 0.0598 2.9 VFS5045VA301
1605 1000 0.110 0.143 1.9 VFS5045VA102
5045SA
[at 1MHz] 180 150 0.240 0.312 1.3 VFS5045SA151
Measurement item Product No. Manufacturer
Impedance 4294A Keysight Technologies
DC resistance 34420A Hewlett-Packard
REACH
SVHC-Free
Lead
Free
RoHS
Pb
Halogen
Free
Br
Cl
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20181115
(2/4)
suppression-filter_commercial_vfs5045_en.fm
EMC Components
VFS5045 type
Z FREQUENCY CHARACTERISTICS
INSERTION LOSS VS. FREQUENCY CHARACTERISTICS
Measurement equipment
＊Equivalent measurement equipment may be used.
0 1 10 100
Frequency (MHz)
Impedance (Ω)
0.1
1
100000
1000
100
10
10000
VA301
VA102
SA151
VA151 VA111
VA031
Product No. Manufacturer
4294A Keysight Technologies
0.1 1 10 100
Frequency (MHz)
Insertion loss (dB)
0
20
10
30
40
50
VA301
VA102
SA151
VA151
VA111
VA031
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20181115
(3/4)
suppression-filter_commercial_vfs5045_en.fm
EMC Components
VFS5045 type
SHAPE & DIMENSIONS
RECOMMENDED LAND PATTERN
RECOMMENDED REFLOW PROFILE
PACKAGING STYLE
REEL DIMENSIONS
TAPE DIMENSIONS
PACKAGE QUANTITY
TEMPERATURE RANGE, INDIVIDUAL WEIGHT
Operating temperature range includes self-temperature rise.
The storage temperature range is for after the assembly.
Dimensions in mm
5.0±0.3
5.0±0.3
(2.4)
1.3±0.2 1.3±0.2
3.9±0.2
V031
4.5max.
Dimensions in mm
1.5 2.1 1.5
4.0
Natural
cooling
5s
60 to 120s
Preheating
40s
Soldering
220
°C
220
°C
250°C
180
°C
150
°C
Time
Peak
Temperature
Ty p e A B K
VFS5045 5.3 5.3 4.7
Package quantity 1500 pcs/reel
Operating
temperature range
Storage
temperature range
Individual
weight
–40 to +105 °C –40 to +105 °C 0.46 g
ø13.0±0.5
ø21.0±0.8
2.0±0.5
ø330
(1.0)
Dimensions in mm
ø100
2.0
22.4
12.4
0.4
B
1.75±0.1
12.0±0.3
4.0±0.12.0±0.05
8.0±0.1
AK
5.5±0.1
1.5 +0.1
–0
Dimensions in mm
Sprocket
hole
Cavity
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20181115
(4/4)
suppression-filter_commercial_vfs5045_en.fm
EMC Components
REMINDERS FOR USING THESE PRODUCTS
Before using these products, be sure to request the delivery specifications.
SAFETY REMINDERS
Please pay sufficient attention to the warnings for safe designing when using this products.
The storage period is less than 12 months. Be sure to follow the storage conditions (temperature: 5 to 30°C, humidity: 10 to 75% RH or
less).
If the storage period elapses, the soldering of the terminal electrodes may deteriorate.
Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.).
Before soldering, be sure to preheat components.
The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature
does not exceed 150°C.
Soldering corrections after mounting should be within the range of the conditions determined in the specifications.
If overheated, a short circuit, performance deterioration, or lifespan shortening may occur.
When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to
the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions.
Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal
design.
Carefully lay out the coil for the circuit board design of the non-magnetic shield type.
A malfunction may occur due to magnetic interference.
Use a wrist band to discharge static electricity in your body through the grounding wire.
Do not expose the products to magnets or magnetic fields.
Do not use for a purpose outside of the contents regulated in the delivery specifications.
The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications equip-
ment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equip-
ment, industrial robots) under a normal operation and use condition.
The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or qual-
ity require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society,
person or property.
If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions
set forth in the each catalog, please contact us.
(1) Aerospace/aviation equipment
(2) Transportation equipment (cars, electric trains, ships, etc.)
(3) Medical equipment
(4) Power-generation control equipment
(5) Atomic energy-related equipment
(6) Seabed equipment
(7) Transportation control equipment
(8) Public information-processing equipment
(9) Military equipment
(10) Electric heating apparatus, burning equipment
(11) Disaster prevention/crime prevention equipment
(12) Safety equipment
(13) Other applications that are not considered general-purpose
applications
When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing pro-
tection circuit/device or providing backup circuits in your equipment.
REMINDERS
