1 Pt100 KN 3026 The KN Series Ceramic Wire Wound PRTDs are suitable for general applications requiring temperature stability. Applications: Industrial resistance thermometers, especially in chemical, power generation plants and analytical equipment. Construction: A platinum coil is sealed inside a high purity aluminum oxide ceramic body. Lead wires are shear force resistant and assure proper connection to extension leads and cables. Models Description Tolerance IEC 60751 Order No. 1Pt100 KN 3026 W0.3 W0.15 W0.1 W0.03 32.206.520 32.206.544 32.206.557 32.206.082 Response time Self Heating 0C (K/mW) Water current Air stream V=3m/s V=0.4m/s Dimensions mm L +3 30- 0 D 2.60.15 d 0.270.01 l 10.00.5 0.4 t 0.5 t 0.9 t 0.5 0.3 0.6 10.5 34.0 t 0.9 Technical Specification 100 Ohm @ 0 C Temperature range: W0.3 (Class B) = -196 to +660 C W0.15 (Class A) = -196 to +600 C (Heraeus exceeds IEC 60751: -100 to +450 C) Insulation resistance after assembly: Measuring current: Tolerance class: W0.1 (Class 1/3 B) = -100 to +350 C W0.03 (Class 1/10 B) = -50 to +300 C > 100 MOhm @ 25 C 1 mA - According to IEC 60751:2008 - Other standards and narrower tolerances are available on request (Special HST Class proportional to W0.3) Temperature stability: Excellent long-term stability Temperature coefficient: Tc = 3850 ppm/K Also available: Leads: Palladium-gold alloy The measuring point is located at 8 mm from the end of the sensor body - Platinum-gold alloy - Different temperature coefficients (3916 ppm/K - old JIS) - Extension leads - Two separated coils can be embedded in one ceramic body Heraeus Sensor Technology USA 1901 Route 130 North Brunswick, NJ 08902 Phone 732-940-4400 Fax 732-940-4445 Email info.hst-us@heraeus.com www.hst-us.com Status: HSTUSA 10/09 Status 01/2009. Technical modifications reserved. Nominal resistance: Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Heraeus: 32206082 32206557 32206544 32206520