08/30/2005
DATE
This document is the property of Amphenol Corporation and is delivered on the
express condition that it is not to be disclosed, reproduced or used, in whole or in
part, for manufacture or sale by anyone other than Amphenol Corporation without its
prior consent, and that no right is granted to disclose or to use any information in this
Of 1
Bottom Connector Type
1: 9-pos. male (09P)
2: 9-pos. female (09S)
3: 15-pos. male (15P)
4: 15-pos. female (15S)
5: 25-pos. male (25P)
6: 25-pos. female (25S)
7: 15-pos. hi-den. female (15HS)
8: 50-pos. SCSI, female (50HS)
9: Multi-port, 9-pos. male x 2 pcs (09P)
0: Multi-port, 9-pos. male + 15-pos. hi-den. female
(09P+15HS)
A: None
B: 3-port earphone Jack
C: 68-pos. SCSI, female (68S)
D: 37-pos. male (37P)
E: 37-pos. female (37S)
F: 44-pos. hi-den. male (44HP)
G: 44-pos. hi-den. female (44HS)
J: 15-pos. hi-den. male (15HP)
K: Multi-port, Mini-Din, 6-pos. female
M: 78-pos. hi-den., male (78HP)
N: 78-pos. hi-den., female (78HS)
P: 26-pos. hi-den., male(26HP)
R: 26-pos. hi-den., female(26HS)
S: 15-pos. hi-den. female (15HS), with ferrite
T: Multi-port, USB A type 2x2 ports
Board Mounting Option
0: 3.18mm clear holes (x4)
1: #4-40 threaded holes (x4)
2: Dual arrowhead boardlock
3: Quad arrowhead boardlock
4: Triple arrowhead boardlock
f
Flange Mounting Option
0: #4-40 threaded hole
1: #4-40 threaded hole
with #4-40UNC screwlock
installed
2: #4-40 threaded hole
with #4-40UNC screwlock
bulk-packed
3: 3.05mm clear hole
4: M3 threaded hole
5: M3 threaded hole with M3
screwlock installed
6: #4-40 threaded hole with
M2.6 screwlock bulk-packed
7: #4-40 threaded screwlock
clinched-mount installed
8: D-SUB: M3 threaded hole,
SCSI II: #2-56 threaded hole
f
G17H X XX X XXX X
Spacing Between Ports
Type C-C (Profile)
1: 15.88 mm (28.42)
2: 19.05 mm (31.60)
3: 22.86 mm (35.41)
4: 13.96 mm (26.50)
5: 18.82 mm (31.60)
6: 20.95 mm (31.72)
7: 20.70 mm (32.20)
8: 17.62 mm (31.60)
9: 17.20 mm (31.60)
Top Connector Type
Henry Ko
NE-5266
A2
SYM
ECO NO.
APPROVED
PREPARED DATE CHECKED DATE APPROVED DATE
document.
TITLE PRODUCT SERIES
G17H SERIES, PART NUMBER G17H
Rev. A2
Sheet 1
All contacts are in 50 " nickel underplate
All specified numbers are minimum thickness of plating.
The variation code may supersede some major specifications defined by this standard part number system
For part number with a variation code. Please refer to the specific set of data sheets released for that variation code
m
Multi-Port
D-sub Connector
Front Shell Finish
0: Zinc chromated
1: Tin over nickel
2: Nickel
Contact Finish
0: Flash gold
1: 15 " gold
2: 30 " gold
3: Full flash gold
4: 50 " gold
5: 2 gold
m
m
m
m
Variation Code
Blank: Standard
Amphenol
PNS- 7H1
PART NUMBER SYSTEM
Amphenol East Asia Limited
ondra sang 08/30/2005 Laura Su 08/30/2005 Ken Lin for 08/30/2005