DSCC 93026
Vishay
Document Number: 40136 For technical questions, contact: tantalum@vishay.com www.vishay.com
Revision: 11-Nov-09 1
DSCC 93026 Super Tan® Wet Tantalum Capacitors
Vishay’s DSCC 93026 capacitor represents a major
breakthrough in wet tantalum technology. Its unique cathode
system provides the highest capacitance per unit volume.
The design facilitates a doubling of capacitance, lower ESR
and higher ripple current rating compared with conventional
wet tantalum products. Moreover, the DSCC 93026 has the
capacitance stability of a solid tantalum capacitor and there
are no circuit impedance restrictions.
The DSCC 93026 is housed in an all tantalum, hermetically
sealed case and is manufactured to withstand hazardous
environments. The DSCC 93026 is used widely in the
defense and aerospace industries and whenever there is a
space problem.
FEATURES
•Terminations: Standard tin/lead (Sn/Pb)
•Very High Capacitance
•10 to 1800 µF
•25 VDC to 125 VDC
•- 55 °C to + 125 °C
•Very Low ESR
•High Ripple Current
•All Tantalum Case
•Hermetically Sealed
•Low DCL
APPLICATION NOTES
a) No continuous reverse voltage permissible.
b) The peak of the applied AC ripple and the applied DC
voltage must not exceed the DC voltage rating of the
capacitor.
c) Ripple current ratings by part number at 85 °C and 40 kHz
are included in the table. Ripple current correction factors
for other temperatures and frequencies are given on the
next page.
d)Transient reverse voltage surges are acceptable under
the following conditions:
The peak reverse voltage does not exceed 1.5 V and the
peak current times the duration of the reverse transient
does not exceed 0.05 As. In addition, the repetition
frequency of the reverse voltage surge is less than 10 Hz.
DIMENSIONS in inches [millimeters]
CASE CODE D MAX. INSULATED D ± 0.016 (0.41) L + 0.031 (0.79) UNINSULATED E ± 0.250 (6.35) MAX.
T1 0.219 (5.56) 0.188 (4.78) 0.453 (11.51) 1.500 (38.10)
T2 0.312 (7.92) 0.281 (7.14) 0.641 (16.28) 2.250 (57.15)
L2 0.312 (7.92) 0.281 (7.14) 1.008 (25.60) 2.250 (57.15)
T3 0.406 (10.31) 0.375 (9.52) 0.766 (19.46) 2.250 (57.15)
T4 0.406 (10.31) 0.375 (9.52) 1.062 (26.97) 2.250 (57.15)
Notes
1. Material at egress is tantalum
2. Insulation sleeving will lap over the ends of the capacitor case.
3. Tinned nickel leads, solderable and weldable
Approx. Weight
T1: 2.3 g, T2: 5.7 g
T3: 9.4 g, T4: 14.8 g
0.094 (2.38)
MAX.
LE
E
TERMINAL LOCATION
WITHIN 0.031 OF CENTER
“D” DIA.
0.025 + 0.002
(0.64 + 0.05)
TERMINAL WELDED
TO CASE 0.250 (6.35)
MAX.