Part Number
(1)
μH±20%
Hea
ting
Curren
t
(2)
(Adc)
(3)
(Adc)
DCR (mΩ)
T
yp.
Ma
x.
HA72E-06R10LF
0.10
26.2
45.0
1.5
1.7
HA72E-06R20LF
0.20
20.3
34.0
2.5
2.8
HA72E-06R33LF
0.33
18.0
22.0
3.2
3.9
HA72E-06R47LF
0.47
16.1
19.0
4.0
4.2
HA72E-06R68LF
0.68
14.4
16.5
5.0
5.5
HA72E-061R0LF
1.00
10.3
15.0
9.0
10.0
HA72E-061R5LF
1.50
8.4
10.0
13.0
14.0
HA72E-062R2LF
2.20
8.3
8.5
18.0
20.0
HA72E-063R3LF
3.30
6.6
8.0
26.5
30.0
HA72E-064R7LF
4.70
5.4
6.5
39.0
42.0
HA72E-066R8LF
6.80
4.1
5.0
62.0
68.0
HA72E-068R2LF
8.20
3.5
4.2
80.0
100.0
HA72E-06100LF
10.0
3.2
4.0
100.0
105.0
HA72E-06330LF
33.0
1.8
2.5
302.0
332.0
Magnetics
High Power High Performance
Molded Surface Mount
Inductors
Model HA72E-06
Features and Benefits
Operating Temperature Range -40°C to +155°C
Temperature Rise, Maximum 50°C
Operating Frequency Up to 3MHz
AEC-Q200 Grade 0 CERTIFIED
RoHS Compliant
Specification @ 25°C
Induct
ance Isat
Notes:
(1) Inductance is measured at 100 kHz, 0.1Vac without DC current.
(2) The Hea
ting
Current is the approximate DC current which causes the component temperature to increase by 50°C. This current is determined by
soldering the component on a typical application PCB, and then applying the current to the device for 30 minutes.
(3) The saturation current (Isat) is the approximate current at which the inductance will be decreased by 20% typical from its initial (zero DC) value.
(4) The part temperature (ambient + temperature rise) should not exceed 155°C.
Outline Dimensions (mm)
General Note
TT Electronics reserves the right to make changes in product specification without notice or liability.
All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.
© TT Electronics plc
BI Technologies
A-1445, Jalan Tanjung Api
25050 Kuantan
Pahang Darul Makmur
Malaysia
Ph: +60 9 565 8888 Fax: +60 9 514 3555
http://www.ttelectronics.com/magnetics/customer-service-enquiry
Rev. 02 7.17
NOT SUPPORTED FOR NEW DESIGN
FOR AUTOMOTIVE DESIGNS, PLEASE REFER TO HA72L
FOR INDUSTRIAL DESIGNS, PLEASE REFER TO HM72L
High Power High Performance
Molded Surface Mount Inductors
Model HA72E-06
Electrical Characteristic @ 25°C
Packaging / Ordering Information
One reel (13”) 2000 pcs
One shipping carton (6 reels) 12000 pcs
Ordering Information
General Note
TT Electronics reserves the right to make changes in product specification without notice or liability.
All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.
© TT Electronics plc
BI Technologies
A-1445, Jalan Tanjung Api
25050 Kuantan
Pahang Darul Makmur
Malaysia
Ph: +60 9 565 8888 Fax: +60 9 514 3555
http://www.ttelectronics.com/magnetics/customer-service-enquiry
Rev. 02 7.17
Inductance Code:
First 2 digits are significant. Last digit denotes
number of trailing zeros. For values below
10µH, "R" denotes the decimal point
13" tape & reel packing
