DESCRIPTION
PaintYourDragon is back with another gorgeous laser-cut masterpiece. This time he's taken a
pass at updating the classic Adafruit Pi Box for the Raspberry Pi Model A+.
Keep your Raspberry Pi® Model A+ computer safe and sound in this lovely clear acrylic
enclosure. We designed this case to be beautiful, easy to assemble and perfect for any use (but
especially for those who want to tinker!) This enclosure is not compatible with the Raspberry
Pi Model A, B, or B+!
The case comes as 6 pieces that slide together and secure with four screws. Made of crystal-
clear acrylic, this case keeps the Pi secure, has a hinged top for connector access, and even has
little feet cut into the sides so that it stands up above your desk. You can use all of the
connectors on the edges of the Pi: HDMI, microSD slot, micro USB power, and the USB port.
There's also a cut out to allow a 40-pin IDC cable to the GPIO breakout pins on the Pi and pass
it though the case. For more advanced hacking, the enclosure is designed so that you can lift or
remove the top piece and plug any sort of cables you wish into the breakouts in the middle. The
case is airy enough that no additional vents or cooling is required - we tested the enclosed Pi
over a 24 hour period at full load with no significant increase in temperature.
Be sure to check out more of our awesome Raspberry Pi accessories including:
Bare 4 GB SD card - you'll need this to load the Debian image and is not included in a Pi
computer purchase. Tested and works perfectly! We also have a wide range of pre-burned
SD cars
5V @ 1 Amp USB power supply - you'll need this to power the Pi using a Micro USB cable.
Tested and works perfectly!
Micro USB cable - required to power the Pi and is not included in a Pi computer purchase
HDMI cable - required to connect a Pi to a monitor and is not included in a Pi computer
purchase
Keyboards and Mice - We have a range of wired and wireless options
A wide range of accessories and essentials
Various small displays as well as nice Pi-compatible HDMI monitors in a range of sizes,
from 2.5" to 10"
This product comes with the 6 acrylic pieces and assembly hardware. Raspberry Pi A+
computer is **not** included. No other cables or connectors or accessories are included.
New Products 11/26/2014
TECHNICAL DETAILS
MAY WE ALSO SUGGEST...
Dimensions: 72mm x 64mm x 25mm / 2.9" x 2.5" x 1.0"
Adafruit Pi Protector for
Raspberry Pi Model A+
Adafruit Raspberry Pi B+ / Pi
2 / Pi 3 Case - Smoke Base
GPIO Ribbon Cable for
Raspberry Pi Model
Raspberry Pi Model A+
512MB RAM
Pibow Royale - Enclosure
for Raspberry Pi Model A+
EXPAND TO SEE DISTRIBUTORS
DISTRIBUTORS
CONTACT
SUPPORT
DISTRIBUTORS
EDUCATORS
JOBS
FAQ
SHIPPING & RETURNS
TERMS OF SERVICE
PRIVACY & LEGAL
ABOUT US
ENGINEERED IN NYC Adafruit ®
"The key to the future of the world is
finding the optimistic stories and
letting them be known" -
Pete
Seeger
4.94.9
