NEW LED Lighting System 3Z4S-LT/LE Series Datasheet ,%$ .%84 '%.%2!4)/. This document provides information mainly for selecting suitable models. Please read the Instruction Sheet carefully for information that the user must understand and accept before purchase, including information on warranty, limitations of liability, and precautions. /-2/. #ORPORATION )NDUSTRIAL !UTOMATION #OMPANY !UTHORIZED $ISTRIBUTOR 4OKYO *!0!. #ONTACT WWWIAOMRONCOM 2EGIONAL (EADQUARTERS /-2/. %52/0% "6 7EGALAAN *$ (OOFDDORP 4HE .ETHERLANDS 4EL &AX /-2/. %,%#42/.)#3 ,,# /NE #OMMERCE $RIVE 3CHAUMBURG ), 53! 4EL &AX /-2/. !3)! 0!#)&)# 04% ,4$ .O ! !LEXANDRA 2OAD ,OBBY !LEXANDRA 4ECHNOPARK 3INGAPORE 4EL &AX /-2/. #().! #/ ,4$ 2OOM "ANK OF #HINA 4OWER 9IN #HENG :HONG 2OAD 0U$ONG .EW !REA 3HANGHAI #HINA 4EL &AX (c) /-2/. #ORPORATION !LL 2IGHTS 2ESERVED )N THE INTEREST OF PRODUCT IMPROVEMENT SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE #3-?2??5 0RINTED IN *APAN #AT .O 1 % Index Strobe Controller P4 Direct Ring Light P6 Low Angle Ring Light P7 Coaxial Light/Simulated Coaxial Episcopic Light P8 Shadowless Light P9 Bar Light/Line Light P10 Dome Light High-powered Spot LED Light IR Light P12 Direct Backlight P13 Edge-type Backlight P14 Square Oblique Light P15 UV Light P16 Spot LED Light Parallel Light CCTV Lens CCTV Lens Option Non-telecentric Macro Lens 2 P11 P17 P18 P19 New Power Supplies for MCEP/MSPP Series P20 New Power Supplies for MG-Wave Series P22 Optional Accessories P25 3 Strobe Controller 3Z4S-LT MLEK-C080E1LS (for F150-S1A, F160-S2 Camera) 3Z4S-LT MLEK-C100E1TS2 (for FZ Camera) 3Z4S-LT MLEK-C100E1TSX (for ZFX-S/SC Camera) Power Supply for LED Illumination Vision Sensor Controller Ratings and Specifications The strobe intensity can be manually adjusted. Model 3Z4S-LT MLEK-C080E1LS (See note 1.) 3Z4S-LT MLEK-C100E1TS2 No. of outputs 1-channel output Output current Vision Sensor Camera Constant current control Output form Strobe output (synchronized with rising edge trigger) Output adjustment function Adding the Strobe Controller The Strobe Controller operates with power supplied from the Camera Head. The illumination is turned ON when the Strobe Controller receives a trigger signal from the Camera Head. Vision Sensor Controller Vision Sensor Camera Variable output range 0 to 100% Strobe emission time 8.3 ms (standard) Simply connect the Camera and Illumination Device with a single cable. Allowable ON duty 100% Usage environment Indoor use at a max. altitude of 2,000 m, with no inflammable or corrosive gases present, and no adhesion of foreign matter Ambient temperature and humidity 0 to 45C, 80% up to 31C and then dropping linearly to 50% at 40C Storage temperature and humidity -20 to 85C, 20 to 80% humidity (with no condensation) Connected and mounted to F160-S2 or F150-S1A Camera Connected and mounted to FZ-S/FZ-S2M Camera Cooling method Natural air cooling Degree of protection IP30 (IEC 60529) Note: This configuration can also be used with the F150-S1A, F160-S2 or ZFX-S/SC Camera. Connected and mounted to ZFX-S/SC Camera Approx. 80 g Weight Strobe Controller Automatically set by ZFX Controller Toff: 10 s max. (at max. setting) M-RCB4L (4-pin Extension Cable) (indicate length in the 2 square boxes (): 01=1m, 02 = 2 m, 03 = 3 m) Extension Cable (purchased separately) Automatically set by FZ Controller Ton: 30 s max. (at max. setting) Mounting method LED Illumination External communications setting only (See note 3.) Manual dial only Strobe emission delay time 1.0 A max. (when using 1.0-A illumination) (See note 2.) 0.83 A max. (when using 0.8-A illumination) (See note 2.) Output control method LED Illumination 3Z4S-LT MLEK-C100E1TSX Note 1: Illumination marked "" in the Connection to Strobe Controller column of the Model Number Legend table can be used. Note 2: Depends on the illumination used. Note 3: Strobe intensity adjustment and variable range. Dimensions (Unit: mm) MLEK-C080E1LS MLEK-C100E1TS2 60 4-3.2 dia. 200+20-0 150+20-0 6.25 72.5 35.7 31 26 6 3 14.5 8.5 29 22 3.7 12 28 24.5 1 2-C2 (Including the other side) 6 31 8-2.5 dia. 14.5 Strobe Controller MLEK-C080E1LS MLEK-C100E1TS2 MLEK-C100E1TSX No Power Supply Required = Large Cost Reduction 72.5 103.5 4-3.2 dia. 150+20 -0 200+20 -0 30.5 Provided spacer (t=3) 31 26 3 24.5 MLEK-C100E1TSX 3-2.5 dia. 2-1.5 dia. 3-2.5 dia. 28 24 18 28 18 2.5 14.5 40.5 45.5 40.5 46 Provided spacer (t=8) 72.5 118.5 150+20 -0 200+20 -0 Note: When using the MLEK-C100E1TS2 and MLEK-C100E1TSX 4 5 MDRL Direct Ring Light Series Low Angle Ring Light Low Angle Ring Light Direct Ring Light Model Number Legend 3Z4S-LT MDRL-C Internal diameter of the ring (mm) Luminescent color (Red=R, Green=G, Blue=B, White=W) MLRL Series Model Number Legend 3Z4S-LT MLRL-C Internal diameter of the ring (mm) Luminescent color (Red=R, Green=G, Blue=B, White=W) List of Models Model Dimension MDRL-CR10 A Liminescent Color Red Max. rated current IFM (A) 0.11 Weight (g) Power supply MDRL-CG10 A Green 0.17 MDRL-CB10 A Blue 0.17 MDRL-CW10 A White 0.17 080 MDRL-CR16 B Red 0.24 080 MDRL-CG16 B Green 0.37 080 MDRL-CB16 B Blue 0.37 MDRL-CW16 B White 0.37 Connection to strobe controller 080 080 50 080 65 List of Models 080 Model 080 Dimension Liminescent Color Max. rated current IFM (A) MLRL-CR25 A Red 0.15 MLRL-CG25 A Green 0.24 MLRL-CB25 A Blue 0.24 MLRL-CW25 A White 0.24 MLRL-CR46 B Red 0.17 MLRL-CG46 B Green 0.27 080 MLRL-CB46 B Blue 0.27 080 MDRL-CR28 C Red 0.20 MDRL-CG28 C Green 0.31 MDRL-CB28 C Blue 0.31 MDRL-CW28 C White 0.31 080 MDRL-CR31 D Red 0.36 080 MDRL-CG31 D Green 0.55 MDRL-CB31 D Blue 0.55 MDRL-CW31 D White 0.55 080 MLRL-CW46 B White MDRL-CR35 E Red 0.34 080 0.27 MDRL-CG35 E Green 0.52 MLRL-CR48 C Red 0.30 MDRL-CB35 E Blue 0.52 MLRL-CG48 C Green 0.47 MDRL-CW35 E White 0.52 080 MLRL-CB48 C Blue 0.47 MDRL-CR36 F Red 0.36 080 MLRL-CW48 C White 0.47 MDRL-CG36 F Green 0.55 080 MLRL-CR68 D Red 0.57 MDRL-CB36 F Blue 0.55 MLRL-CG68 D Green 0.61 MDRL-CW36 F White 0.55 080 MLRL-CB68 D Blue 0.61 MDRL-CR50 G Red 0.64 080 MLRL-CW68 D White 0.61 MDRL-CG50 G Green 0.96 230 MLRL-CR100 E Red MDRL-CB50 G Blue 0.96 0.96 MDRL-CW50 G White 0.96 230 MLRL-CG100 E Green 1.03 MLRL-CB100 E Blue 1.03 MLRL-CW100 E White 1.03 080 65 080 080 130 080 150 080 120 080 180 230 MDRL-CR56 H Red 1.12 230 MDRL-CG56 H Green 1.55 230 MDRL-CB56 H Blue 1.55 MDRL-CW56 H White 1.55 520 080 70 080 080 080 080 80 080 080 080 080 110 080 080 080 080 190 080 080 230 230 320 230 230 Options : Production by order Good for producing more uniform illumination than with direct lighting and for reducing glare and reflections. Diffusion ring Diffusion and Polarizing plates are available to prevent the vignetting of image. See "Adapter: MAD Series" on page 25. Dimensions 66 dia. 50 dia. 31 dia. Four, M3 mounting holes with a depth of 4 mm equally divided along circumference A (MLRL-C 25) Four, M3 mounting holes with a depth of 4 mm equally divided along circumference 20 15 B(MLRL-C 46) 50 dia. Four, M3 mounting holes with a depth of 4 mm equally divided along circumference 38 dia. 25 dia. 120 dia. 90 dia. 56 dia. MLRL-C (R,G,B,W) 48 MDF-LR68 MLRL-C (R,G,B,W) 68 MDF-LR100 MLRL-C (R,G,B,W) 100 C (MLRL-C 48) Four, M3 mounting holes with a depth of 5 mm equally spaced along circumference 75 dia. 56 dia. 46 dia. 74 dia. 60 dia. 48 dia. Four, M3 mounting holes with a depth of 4 mm equally divided along circumference 11.5 H(MDRL-C 56) D(MLRL-C 68) Four, M3 mounting holes with a depth of 5 mm equally divided along circumference 22 31.5 17 90 dia. 70 dia. 50 dia. Four, M3 mounting holes with a depth of 4 mm equally divided along circumference 5.5 50 dia. 36 dia. G(MDRL-C 50) 20 66 dia. Four, M3 mounting holes with a depth of 3 mm equally divided along circumference 7.5 F(MDRL-C 36) 22 70 dia. 35 dia. Four, M3 mounting holes with a depth of 5 mm equally spaced along circumference on top surface PCD 50 4.5 E (MDRL-C 35) MDF-LR48 10 18.5 16 D(MDRL-C 31) Applicable model MLRL-C (R,G,B,W) 25 19 40 dia. 28 dia. Four, M3 mounting holes with a depth of 4 mm equally divided along circumference Dimensions Model MDF-LR25 100 dia. 84 dia. 68 dia. E(MLRL-C 100) 140 dia. Four, M3 mounting holes with a depth of 5 mm equally spaced along circumference 125 dia. 100 dia. 24 50 dia. 8.5 C(MDRL-CR28) Four, M3 mounting holes with a depth of 4 mm equally divided along circumference 48 dia. 38 dia. 16 dia. 4 B(MDRL-C 16) 16 20 dia. 10 dia. Four, M3 mounting holes with a depth of 4 mm equally divided along circumference 5 32 dia. 4.5 A (MDRL-C 10) Connection to strobe controller 080 : Production by order 230 For detail, Power supply 230 The MDRL-C*35 provides perpendicular illumination to enable a long working distance. The recommended working distance is 65 mm or longer, but if a reflective surface is being illuminated, the working distance can be as long as 200 mm. Options Weight (g) 90 Mounting hole position: Equally spaced starting at a 45 offset from where the cable is connected to the unit. (Hole diameters, depths, and quantities are shown in the drawings.) 6 Standard cable length: 500 mm Mounting hole locations: Equally spaced starting at a 45 offset from where the cable is connected to the unit. (Hole diameters, depths, and quantities are shown in the drawings.) Standard cable length: 500 mm 7 Coaxial Light/Simulated Coaxial Episcopic Light MCEL MSCL Series Shadowless Light Series Shadowless Light Coaxial 3Z4S-LT MCEL-C External diameter of the point Luminescent color (Red=R, Green=G, Blue=B, White=W) Model Number Legend Shadowless 3Z4S-LT MSRL-C Internal diameter of the ring (mm) Luminescent color (Red=R, Green=G, Blue=B, White=W) Shadowless Low Angle Ring Simulated Coaxial 3Z4S-LT MSLL-C 3Z4S-LT MSCL-C Internal diameter of the ring (mm) Luminescent color (Red=R, Green=G, Blue=B, White=W) Box height Revision code Luminescent color (Red=R, Green=G, Blue=B, White=W) Shadowless Low Angle Square 3Z4S-LT MSQL-C External side dimension (mm) Luminescent color (Red=R, Green=G, Blue=B, White=W) List of Models List of Models Lineup of Coaxial Light Dimension Liminescent Color Max. rated current IFM (A) MCEL-CR8 A Red 0.04 MCEL-CG8 A Green 0.03 MCEL-CB8 A Blue 0.03 MCEL-CW8 A White 0.03 Weight (g) Power supply Connection to strobe controller 080 Line up of Shadowless 080 35 Model 080 080 Lineup of Simulated Coaxial Episcopic Light Dimension Liminescent Color Max. rated current IFM (A) Weight (g) Power supply MSCL-CR24 B Red 0.09 080 MSCL-CG24 B Green 0.20 080 MSCL-CB24 B Blue 0.20 MSCL-CW24 B White 0.20 080 MSCL-CR39 C Red 0.16 080 MSCL-CG39 C Green 0.31 080 MSCL-CB39 C Blue 0.31 MSCL-CW39 C White 0.31 080 MSCL-CR56-B D Red 0.33 080 MSCL-CG56-B D Green 0.66 MSCL-CB56-B D Blue 0.66 MSCL-CW56-B D White 0.66 080 MSCL-CR74-B E Red 0.62 080 MSCL-CG74-B E Green 1.11 MSCL-CB74-B E Blue 1.11 MSCL-CW74-B E White 1.11 MSCL-CR105-B* F Red 2.14 MSCL-CG105-B* F Green 2.07 MSCL-CB105-B* F Blue 2.07 MSCL-CW105-B* F White 2.07 110 160 320 520 Connection to strobe controller 080 080 230 230 B(MSCL-C 24) Green 0.50 A Blue 0.50 MSRL-CW20 A White 0.50 080 MSRL-CR33 B Red 0.45 080 MSRL-CG33 B Green 0.69 MSRL-CB33 B Blue 0.69 MSRL-CW33 B White 0.69 080 MSRL-CR44 C Red 0.57 080 MSRL-CG44 C Green 0.80 MSRL-CB44 C Blue 0.80 MSRL-CW44 C White 0.80 Dimension Liminescent Color MSLL-CR109 D Red 0.62 MSLL-CG109 D Green 1.10 MSLL-CB109 D Blue 1.10 MSLL-CW109 D White 1.10 Model Dimension Liminescent Color E Red 0.09 230 MSQL-CG32 E Green 0.14 230 MSQL-CB32 E Blue 0.14 MSQL-CW32 E White 0.14 MSQL-CR48 F Red 0.13 MSQL-CG48 F Green 0.20 MSQL-CB48 F Blue 0.20 MSQL-CW48 F White 0.20 C(MSCL-C 39) Three, M2 mounting holes with a depth of 4 mm 70 20.5 7 Glass plate 28 dia. 18 A(MSRL-C 20) Four, M3 mounting holes with a depth of 4 mm 080 270 080 080 Weight (g) Power supply Connection to strobe controller 080 230 320 230 230 Max. rated current IFM (A) Weight (g) Power supply Connection to strobe controller 080 080 80 080 080 080 080 120 080 080 B(MSRL-C 33) 74 dia. 50 dia. 20 dia. F(MSCL-C 105) 56 145 C(MSRL-C 44) 10 105 106 70 42 77 X 77 70 Four, M3 mounting holes with a depth of 4 mm 123 dia. 70 dia. 44 dia. Glass plate 42 12 Glass plate 20 14 50 X 50 110 82 60 75 45 Glass plate Four, M3 mounting holes penetration Four, M4 mounting holes with a depth of 4 mm Standard cable length: 500 mm F (MSQL-C 48) 104 dia. 70 dia. 33 dia. Four, M3 mounting holes with a depth of 4 mm 48 X 48 30 X 30 80 dia. (Lighting surface) 26 X 26 10 X 10 D(MSLL-C 109) E(MSQL-C 32) Four, M3 mounting holes with a depth of 4 mm 32 X 32 136 dia. 120 dia. 109 dia. 15 X 15 10 X 10 40 110 42 101 dia. (Lighting surface) 8 080 30 15 (Lighting surface) 30 15 (Lighting surface) Reflection panel Four, M3 mounting holes with a depth of 3 mm Note: The reflection panel is detatchable. 18 E(MSCL-C 74) 74 60 40 56 57 20 18 40 080 210 46.1 dia. 17 Three, M2 mounting holes with a depth of 4 mm Four, M4 mounting holes with a depth of 4 mm 30 28 dia. 080 : Production by order 39 24 Four, M3 mounting holes with a depth of 8 mm 40 20 12 18 X 18 Cooling fan Four, M3 mounting holes with a depth of 4 mm 080 140 (Lighting surface) 93 Connection to strobe controller Dimensions 18 X 18 30 Power supply 38 Four, M3 mounting holes with a depth of 4 mm 24 30 12 Three, M2 mounting holes with a depth of 4 mm D (MSCL-C 56) Weight (g) 080 Max. rated current IFM (A) MSQL-CR32 30 6 dia. (Lighting surface) A MSRL-CB20 230 Refer to page 26. 15 MSRL-CG20 18 14 dia. 8 dia. 56 17 17 Max. rated current IFM (A) Line up of Shadowless Low Angle Square Dimensions A (MCEL-C 8) 0.32 Model 080 230 *Always run the cooling fan to prevent heat build-up. *A Power Supply Extension Cable (M-RCB00L) is require for the built-in fan. This is in addition to the normal Extension Cable. : Production by order Red Line up of Shadowless Low Angle Ring 080 230 920 Liminescent Color A 36 Model Dimension MSRL-CR20 20 Model 17 Coaxial Light/Simulated Coaxial Episcopic Light Model Number Legend MSRL Series MSLL Series MSQL Series 126 dia. (Lighting surface) Four, M3 mounting holes with a depth of 3 mm Mounting hole locations: A to D: Equally spaced starting at a 45 offset from where the cable is connected to the unit. (Hole diameters, depths, and quantities are shown in the drawings.) Standard cable length: 500 mm 9 MBRL Series MLNL Series Bar Light/Line Light Dome Light MBRL Series 3Z4S-LT MBRL-C Size (length and width) Luminescent color (Red=R, Green=G, Blue=B, White=W) MDML Series Model Number Legend 3Z4S-LT MDML-C External size Luminescent color (Red=R, Green=G, Blue=B, White=W) MLNL Series 3Z4S-LT MLNL-C Dimensions B(MDML-C 156) 45 Four, M3 mounting holes with a depth of 4 mm Four, M4 mounting holes with a depth of 10 mm PCD120 PCD 30 Cover glass 37 Dimension Liminescent Color Max. rated current IFM (A) Weight (g) Power supply MBRL-CR5015 A Red 0.13 MBRL-CG5015 A Green 0.26 MBRL-CB5015 A Blue 0.26 MBRL-CW5015 A White 0.26 080 MBRL-CR7530 B Red 0.36 080 MBRL-CG7530 B Green 0.52 MBRL-CB7530 B Blue 0.52 MBRL-CW7530 B White 0.52 080 MBRL-CR13015 C Red 0.32 080 MBRL-CG13015 C Green 0.53 MBRL-CB13015 C Blue 0.53 MBRL-CW13015 C White 0.53 080 83 5.5 3.1 dia. Housing Model 080 Dimension Liminescent Color MDML-CR50 A Red 0.24 MDML-CG50 A Green 0.37 MDML-CB50 A Blue 0.37 MDML-CW50 A White 0.37 MDML-CR156 B Red 1.16 MDML-CG156 B Green 1.86 MDML-CB156 B Blue 1.86 MDML-CW156 B White 1.86 080 85 LED Standard cable length: 500 mm 080 120 Connector Cable List of Models 080 50 CN4 1 2 3 4 Light guide dome 111 dia. 156 dia. Connection to strobe controller 080 CN1 1 2 3 4 CN3 1 2 3 4 28 dia. Half mirror 26 dia. Diffusion board SENS BOX (Lighting part) Model 38 Cable 47 dia. Lineup of Bar Light (500) CN2 1 2 3 4 50 dia. 11 dia. 40 List of Models 350 40 45 49.5 20.5 14 dia. A(MDML-C 50) 4.9 dia. Line width Luminescent color (Red=R, Green=G, Blue=B, White=W) 3.1 dia. Bar Light/Line Light Model Number Legend Dome Light 080 080 Max. rated current IFM (A) Weight (g) Power supply Connection to strobe controller 080 080 130 080 080 230 230 1600 230 230 Lineup of Line Light Model : Production by order Dimension LiminescentColor Max. rated current IFM (A) MLNL-CR192 D Red 0.18 MLNL-CG192 D Green 0.36 MLNL-CB192 D Blue 0.36 MLNL-CW192 D White 0.36 Weight (g) Power supply Connection to strobe controller 080 080 420 080 080 : Production by order Dimensions High-powered Spot LED Light MCEP Series Model Number Legend B(MBRL-C 7530) Luminescent color (Red=R, Green=G, Blue=B, White=W) Dimensions 6 dia. (Lighting part) A (MCEP-C 8) 6 dia. (Lighting part) D(MLNL-C 192) 15 16.3 Condenser lens Pin number Signal 1P NC Power supply(+) 2P Power supply( - ) 3P 8 dia. Two, M4 mounting holes with a depth of 10 mm (Both sides) 24 Housing 50 M3 knurled screw (for adjusting the LED position) Eight, M3 enameled screw (for supporting the LED light) Cable 10 Standard cable length: 500 mm Separator for the MCEP-AD Series (27.1) List of Models 27.9 Connector 1P 500 Mounting hole locations: A to C: Arranged around the center of the mounting surface. 2 5 LED 30 LED line lighting unit 3.1 dia. 80 60 20 20 Two, M3 mounting holes with a depth of 3 mm 27 dia. 14 dia. 8 210 205 1 Two, M2 pan head screws Two, M2 pan head screws Four, M2 mounting holes with a depth of 8 mm 12 205 192(Lighting surface) (Lighting surface) 140 135 130(Lighting surface) 17 15 (Lighting surface) C (MBRL-C 13015) 25 dia. 50 Two, M3 mounting holes with a depth of 4 mm Removing the Point Rod 27 dia. 18 30 8 18 dia. (Lighting part) 17 32 50(Lighting surface) 20 Two, M3 mounting holes with a depth of 3 mm 3Z4S-LT MCEP-C 85 80 75(Lighting surface) 60 55 30(Lighting surface) (Lighting surface) 15 A(MBRL-C 5015) Undo the two screws then remove . It can be connected to the MCEP-AD Series Model Dimension Liminescent Color MCEP-CR8 A Red 620.5 MCEP-CG8 A Green 525 MCEP-CB8 A Blue 470 MCEP-CW8 A White Dominant wavelength* Color temperature 645nm Max. rated current IFM (A) Weight (g) - 0.35 535nm - 0.35 480nm - 0.35 All 5000 6000K Connection to strobe controller 50 0.35 *The dominant wavelength of visible color according to CIE color coordinates. There are differences in the illuminated color for the dominant wavelengths of these LEDs. Colors may appear to be different even for the same model number. Standard cable length: 500 mm 11 MDRL Series MSRL Series MBRL Series MDBL Series IR Light 3Z4S-LT M L - C IR DR=Direct ring SR=Shadowless ring BR=Bar DB=Direct backlight Direct Backlight Direct Backlight IR Light Model Number Legend See the explanation of each series model MDBL Series MDBC Series Model Number Legend Shell type 3Z4S-LT MDBL-C Size (length and width) Luminescent color (Red=R, Green=G, Blue=B, White=W) Luminescent color (IR: Infrared) Chip mounting type 3Z4S-LT MDBC-C Chip type Size (length and width) Luminescent color (Red=R, Green=G, Blue=B, White=W) List of Models List of Models Dimension Liminescent Color Weight (g) Power supply A Infrared 0.42 130 080 Connection to strobe controller Model Dimension Liminescent Color MSRL-CIR20 B Infrared 0.36 140 080 MDBL-CR25 A Red 0.14 MBRL-CIR7530 C Infrared 0.40 120 080 MDBL-CG25 A Green 0.27 MDBL-CIR70 D Infrared 0.53 190 080 MDBL-CB25 A Blue 0.27 MDBL-CW25 A White 0.27 MDBL-CR70 B Red 0.48 MDBL-CG70 B Green 0.96 MDBL-CB70 B Blue 0.96 MDBL-CW70 B White 0.96 MDBL-CR100 C Red 1.43 MDBL-CG100 C Green 1.55 MDBL-CB100 C Blue 1.55 MDBL-CW100 C White 1.55 MDBL-CR180100 D Red 2.30 MDBL-CG180100 D Green 2.30 MDBL-CB180100 D Blue 2.30 MDBL-CW180100 D White 2.30 *The dominant wavelength of visible color according to CIE color coordinates. There are differences in the illuminated color for the dominant wavelengths of these LEDs. Colors may appear to be different even for the same model number. Dimensions B(MSRL-CIR20) 74 dia. 50 dia. 20 dia. 18 Dimension Liminescent Color MDBC-CR100 Model E Red 0.81 MDBC-CG100 E Green 0.95 MDBC-CB100 E Blue 0.95 MDBC-CW100 E White 0.95 MDBC-CR150 F Red 0.99 MDBC-CG150 F Green 2.14 MDBC-CB150 F Blue 2.14 MDBC-CW150 F White 2.14 D(MDBL-CIR70) 100 90 70 60 080 080 080 230 190 230 230 230 230 290 230 230 230 230 520 230 230 Max. rated current IFM (A) Weight (g) Power supply Connection to strobe controller 230 230 170 230 230 230 230 310 230 230 102 10 152 150 (Lighting surface) 100 (Lighting surface) Diffusion board 100 (Lighting surface) 5 2-4.5 dia. 30 Diffusion board 4-3.5 dia. R 10 G, B, W 2-4.5 dia. 15 100 (Lighting surface) 50 Diffusion board 102 10 100 30 130 120 5 160 4-3.5 dia. 150 (Lighting surface) Diffusion board C (MDBL-C 100) F (MDBC-C 150) 80 4-3.5 dia. E (MDBC-C 100) 130 120 100 (Lighting surface) 70 (Lighting surface) 25 (Lighting surface) Diffusion board D(MDBL-C 180100) 100 90 24 Standard cable length: 500 mm B (MDBL-C 70) 49 42 110 A (MDBL-C 25) 100 (Lighting surface) 4-3.5 dia. 30 Mounting hole locations: A and B: Equally spaced starting at a 45 offset from where the cable is connected to the unit. (Hole diameters, depths, and quantities are shown in the drawings.) C: Arranged around the center of the mounting surface. 080 60 Dimensions 17 70 (Lighting surface) 72 50 Connection to strobe controller : Production by order 27 Four, M3 mounting holes with a depth of 4 mm (Lighting surface) Diffusion board 18 32 30 (Lighting surface) 75 (Lighting surface) 25 (Lighting surface) 85 80 Power supply 080 130 20 C(MBRL-CIR7530) Weight (g) Lineup of Chip mounting type 46.1 dia. (Lighting surface) 182 180 (Lighting surface) Four, M3 mounting holes with a depth of 4 mm Max. rated current IFM (A) 60 Four, M3 mounting holes with a depth of 4 mm equally divided along circumference 8.5 66 dia. 50 dia. 31 dia. 72 A(MDRL-CIR31) 70 (Lighting surface) Max. rated current IFM (A) Lineup of Shell type Model MDRL-CIR31 15 4-3.5 dia. 30 Diffusion board Standard cable length: 500 mm 12 13 MEBL Edge-type Backlight Series Square Oblique Light Square Oblique Light 3Z4S-LT MEBL-C Size (length and width) Luminescent color (Red=R, Green=G, Blue=B, White=W) List of Models Model Number Legend 3Z4S-LT MDQL-C External size Luminescent color (Red=R, Green=G, Blue=B, White=W) List of Models Model Dimension MEBL-CR25 Liminescent Color Max. rated current IFM (A) A Red 0.03 MEBL-CG25 A Green 0.04 MEBL-CB25 A Blue 0.04 MEBL-CW25 A White MEBL-CR50 B MEBL-CG50 Weight (g) Power supply Connection to strobe controller Model Dimension Liminescent Color Max. rated current IFM (A) Weight (g) Power supply 080 MDQL-CR58 A Red 0.09 080 MDQL-CG58 A Green 0.17 080 MDQL-CB58 A Blue 0.17 0.04 080 MDQL-CW58 A White 0.17 080 Red 0.17 080 MDQL-CR108 B Red 0.42 080 B Green 0.29 080 MDQL-CG108 B Green 0.84 MEBL-CB50 B Blue 0.29 080 MDQL-CB108 B Blue 0.84 MEBL-CW50 B White 0.29 080 MDQL-CW108 B White 0.84 MEBL-CR7050 C Red 0.15 080 MEBL-CG7050 C Green 0.25 45 110 C Blue 0.25 C White 0.25 080 MEBL-CR10080 D Red 0.32 080 MEBL-CG10080 D Green 0.57 080 MEBL-CB10080 D Blue 0.57 MEBL-CW10080 D White 0.57 080 MEBL-CR145 E Red 0.45 080 58 MEBL-CG145 E Green 0.8 080 30 080 25 MEBL-CB145 E Blue 0.8 E White 0.8 55 210 080 080 230 230 230 : Production by order MEBL-CB7050 MEBL-CW145 Connection to strobe controller 080 080 140 MEBL-CW7050 080 230 Dimensions 080 460 A(MDQL-C 58) B (MDQL-C 108) 108 70 60 54 30 3 080 : Production by order 3 2-3.5 dia. 50 (Lighting surface) D(MEBL-C 10080) 132 100 185 145 (Lighting surface) 120 15 (Lighting surface) LED Base 4-4M Housing 2-3.5 dia. 2-C2 4-3.4 dia. 6 dia. through counter bore depth 3.3 100 (Lighting surface) 195 185 145 (Lighting surface) 120 110 80 (Lighting surface) 11 8 60 3.1 dia. 108 70 60 54 25 12 60 E(MEBL-C 145) Housing Standard cable length: 500 mm 4 8 4-3.4 dia. 6 dia. through counter bore depth 3.3 8 70 (Lighting surface) Four, M2.6 60 14 15 25 (Lighting surface) LED 94 71 50 (Lighting surface) 50 (Lighting surface) 90 80 39 7.5 45 74 60 8 90 27 30 C(MEBL-C 7050) Cable Eight, M2 depth 42 (Lighting surface) B(MEBL-C 50) 25 (Lighting surface) A (MEBL-C 25) 30 58 30 Dimensions 6.5 Series 3.1 dia. Edge-type Backlight Model Number Legend MDQL 4-3.4 dia. 6 dia. through counter bore depth 3.3 4-C2 Standard cable length: 500 mm 14 15 MDRL Series MBRL Series MDQL Series UV Light Spot Led Light L - C UV See the explanation of each series model. Luminescent color (Ultra violet=UV) DR=Direct ring BR=Bar DQ=Square oblique List of Models MSPP Series (CE Marking) Model Number Legend 3Z4S-LT MSPP-C Effective size (Lighting part) Luminescent color (Red=R, White=W) List of Models Wide projection Model Model Dimension Liminescent Color MDRL-CUV31 A Ultraviolet 0.36 130 080 MBRL-CUV7530 B Ultraviolet 0.36 120 080 MDQL-CUV108 C Ultraviolet 0.36 210 080 Max. rated current IFM (A) Weight (g) Power supply Connection to strobe controller Dimension Liminescent Color Max. rated current IFM (A) Weight (g) Power supply MSPP-CR42 A Red 0.7 460g MLEP-A070 series Connection to strobe controller MSPP-CW42 A White 0.7 460g MLEP-A070 series Nallow projection Model Dimensions Dimension Liminescent Color Max. rated current IFM (A) Weight (g) Power supply MSPP-CR74 B Red 0.7 600g MLEP-A070 series Connection to strobe controller MSPP-CW74 B White 0.7 600g MLEP-A070 series *Always connect a Conversion Cable (3Z4S-LT M-RCB301XS) when connecting the power supply. 60 50 15 (Lighting surface) 72 87 4-4M Standard cable length: 500 mm 90 dia. 74 dia. (Effective lighting part) 102 117 150 CN1 1 3 2 4 CN1 4 1 Screw for adjusting light focus 40 2 3 Screw for adjusting light focus 5 12.5 Mounting hole locations: A: Equally spaced starting at a 45 offset from where the cable is connected to the unit. (Hole diameters, depths, and quantities are shown in the drawings.) B: Arranged around the center of the mounting surface. B(MSPP-C 74) 150 40 5 12.5 Two, M3 mounting holes with a depth of 4 mm 90 75 58 dia. 42 dia. (Effective lighting part) (6 dia.) 60 A (MSPP-C 42) 56 Two, M2 mounting holes with a depth of 3 mm Dimensions Eight, M2 mounting holes with a depth of 3 mm 3.1 dia. 108 70 54 42 8.5 3.1 dia. 30 3 18 20 66 dia. 31 dia. 32 30 PCD50 (Lighting surface) 75 (Lighting surface) Four, M3 mounting holes with a depth of 4 mm 108 70 60 54 C (MDQL-CUV108) 85 80 (Lighting surface) B(MBRL-CUV7530) 3.1 dia. A (MDRL-CUV31) (6 dia.) UV Light Model Number Legend 3Z4S-LT M Spot Led Light Four, M5 mounting holes with a depth of 8 mm (including the other side) Four, M5 mounting holes with a depth of 8 mm (including the other side) Parallel Light MCBP Series Model Number Legend Parallel Light 3Z4S-LT MCBP-C Size (length and width) Luminescent color (Red=R, White=W) List of Models Dimension Liminescent Color MCBP-CG3430 A Green 0.07 MCBP-CB3430 A Blue 0.07 MCBP-CW3430 A White 0.07 Model Max. rated current IFM (A) Weight (g) Power supply Connection to strobe controller 080 260 080 080 : Production by order Dimensions A (MCBP-C 3430) 30 102 Screw with a hexagonal holes M3 46 34 5 Four, M3 mounting holes with a depth of 4 mm 80 28 20 38 40 16 20 Four, M3 mounting holes with a depth of 6 mm 15 60 17 CCTV Lens ML CCTV Lens Series Option ML Series CCTV Lens Option CCTV Lens Polarizing Filter Model 3Z4S-LE ML-PL270 3Z4S-LE ML-PL255 3Z4S-LE ML-PL305 Close-up Ring Model Length (mm) 7-piece set (0.5, 1, 2, 5, 10, 20, 40) 3Z4S-LE ML-EXR* List of Models Model *These Close-up Rings are also available individually. Order using the following model number, replacing the box with the desired length: 3Z4S-LE ML-EXR@. Inquire concerning prices. Dimension Focal distance f (mm) 3Z4S-LE ML-0614 A Field of view (V X H) Focus (F No.) 6 F1.4 Close 42.3x54.6 F1.3 Close 45.0x57.8 3Z4S-LE ML-0813 B 8 3Z4S-LE ML-1214 C 12 3Z4S-LE ML-1614 D 16 3Z4S-LE ML-2514 E 25 3Z4S-LE ML-3519 F 35 F1.9 Close 10.8x14.4 3Z4S-LE ML-5018 G 50 F1.8 Close 7.9x10.5 75 F2.7 Close 4.9x6.5 100 F3.5 Close 3.8x5.1 3Z4S-LE ML-7527 3Z4S-LE ML-10035 H F1.4 Close 0.3 23.0x30.4 0.4 21.6x28.5 Total length A (mm) Maximum compatible CCD 30 1/2 Inch M27 P0.5 0.2 21.9x29.0 Weight (g) Filter screw Closest distance (m) 60 M25.5 P0.5 Camera Mount 2/3 Inch 34.5 1/2 Inch 40 M27 P0.5 45 0.5 M30.5 P0.5 1 2/3 Inch 24.5 50 29 60 37 1 Inch Configuration List of Models Model 2/3 Inch 42.5 65 Rear Converter Lens C-Mount 3Z4S-LE ML-1.5X 43.9 3Z4S-LE ML-2X 3Z4S-LE ML-2.5X 3Z4S-LE ML-3X 3Z4S-LE ML-4X Dimensions Lens A (ML-0614) Rear converter Lens CCD Camera B(ML-0813) A(30) 0B m 21.3 1 0.5 C 16 8 4 C-mount 1-32 UNF 30 dia. Non-telecentric Macro Lens 29 dia. 15 dia. M25.5 P0.5 28 dia. 30 dia. (Filter screw) (C-mount screw) 6.5 TV LENS 8mm1:1.3 17.52 ML-N Series 4 6.8 17.526 (34.5) List of Models D(ML-1614) C (ML-1214) A (24.5) 30 dia. 29.3 dia. M27 P0.5 29.4 dia. C-mount E (ML-2514) 17.52 4 1.4 Model F(ML-3519) Locking screw for iris Locking screw for focus 17.52 A(29) 1.6 WD (mm) Depth of field* Resolution TV distortion 0.1 4.71 364.5 327.7 37.66mm 33.9m 0.4% max. 3Z4S-LE ML03-181N B 0.3 6.11 240.9 181.3 5.43mm 14.6m 0.2% max. 3Z4S-LE ML05-132N C 0.5 6.08 199 132.5 1.95mm 11.7m 0.08% max. 3Z4S-LE ML1-89N D 1.0 8.82 177.5 89.6 0.7mm 7.9m 0.04% max. *The field of depth is calculated based on an image equivalent to 320 horizontal TV lines taken with a 1/2" CCD camera. Dimensions A (ML01-327N) B (ML03-181N) W.D 181.39 17.526 4 30 1/2"CCD 1/2"CCD C-mount 0- C-mount 0- 17.52 A 4 17.52 4 C (ML05-132N) D (ML1-89N) 49 24.2 (O/I=177.5) 17.526 70.4 W.D 89.64.5 17.526 2 4 24.2 4 30 30 0- 16 dia. 0.1 0- 16 dia. 0.1 1/2"CCD C-mount 2 X1.0 C-mount 20.5 dia. 29.4 dia. W.D 132.56.6 X0.5 32 dia. M30.5. P0.5 C-mount (O/I=199) 32 dia. M30.5 P0.5 2 H(ML-7527/ML10035) A(37) 18 42.1 17.3 16 dia. 0.1 16 dia. 0.1 G (ML-5018) (O/I=240.9) (O/I=364.5) W.D 327.716.4 19.3 17.526 10.3 4 2 X0.3 16 dia. C-mount 30 dia. O/I (mm) A 30 dia. 17 dia. C-mount 17.53 4.8 4 Dimension Magnification Effective FNO 3Z4S-LE ML01-327N X0.1 30 dia. 29.3 dia. M27 P0.5 4 M27 P0.5 A(24.5) Non-telecentric Macro Lens 30 dia. 29.3 dia. M27 P0.5 17.52 16 dia. C-mount A(34.5) 1/2"CCD C-mount 19 New Power Supplies for MCEP/MSPP Series These constant-current power supplies are designed specifically for the MCEP Series of High-power LED Spot Lights and MSPP Series of LED Spot Lights. NEW MLEP Analog MLEP-A035W1 LR-200V MLEP-A070W1 LR-100V MLEP-A070W1 LR-200V MLEP-A035W3 LR-100V MLEP-A035W3 LR-200V MLEP-A070W3 LR-100V MLEP-A070W3 LR-200V 100V 200V 100V 200V 100V 200V 100V 200V Single-channel out put max.350 mA Dimension Output channel V AC type Digital type (D) Series Single-channel out put max.700 mA 3-channel out put for each channel max.350 mA 3-channel out put for each channel max.700 mA Model MLEP-A035W1 LRD-100V MLEP-A035W1 LRD-200V MLEP-A070W1 LRD-100V MLEP-A070W1 LRD-200V MLEP-A035W3 LRD-100V MLEP-A035W3 LRD-200V MLEP-A070W3 LRD-100V MLEP-A070W3 LRD-200V 100V 200V 100V 200V 100V 200V 100V 200V AC Type Single-channel out put max.350 mA Output Single-channel out put max.700 mA 3-channel out put for each channel max.350 mA 3-channel out put for each channel max.700 mA A B A B Input voltage 100 - 240V AC 50 / 60Hz 100 - 240V AC 50 / 60Hz Input voltage 100 - 240V AC 50 / 60Hz 100 - 240V AC 50 / 60Hz Input current 0.35 / 0.25A (at AC 100/240V) 0.35/0.25 A (at AC 100/240V) Input current 0.35 / 0.25A (at AC 100/240V) 0.35/0.25 A (at AC 100/240V) Surge current 20A or lower (at 100V AC) 40A or lower (at 240V AC) 20A or lower (at 100V AC) 40A or lower (at 240V AC) Surge current 20A or lower (at 100V AC) 40A or lower (at 240V AC) 20A or lower (at 100V AC) 40A or lower (at 240V AC) Operating temperature Dimension Operating temperature 0 to +45C 0 to +45C Continuous DC output Continuous DC output Output control system Constant current control (the current can be changed) Constant current control (the current can be changed) External light control Supported (0 to 5V) Supported (0 to 5V) Lighting on/off function Supported (photocoupler insulation) Supported (photocoupler insulation) Natural air cooling forcible air cooling Horizontal installation on the rubber supports at the bottom of the unit Horizontal installation on the rubber supports at the bottom of the unit Approximately 0.9kg Approximately 1.4kg Output system Cooling system Installation Weight Connection Specifications A NC External input GND NC A Relay NC Photo-coupler NC NC A Transistor 0-5V NC 5V 8 (Do not use.) Supported ( for each channel, 8bit digital) Lighting on/off function Supported (photocoupler insulation) Supported (photocoupler insulation) Installation Natural air cooling forcible air cooling Horizontal installation on the rubber supports at the bottom of the unit Horizontal installation on the rubber supports at the bottom of the unit Approximately 0.9kg Approximately 1.4kg MLEP-A035W LRD/MLEP-A070W LRD 47k 9 3.9k 2 COMMON 8bit digital input 21 A 8bit digital input 22 A A LSB 5V 9 1 47k 3.9k 8bit digital input 23 NC Relay Photo-coupler Transistor 8bit digital input 25 NC A 8bit digital input 26 MSB 8 8 A ON/OFF 10 5V 3.9k 47k 8bit digital input 27 (MSB) 15 2.5V Ref 5V 47k 8bit digital input 24 NC NC 5V,24V 8bit digital input 20 (LSB) COMMON (+) 10k MLEP-A035W LRD/MLEP-A070W LRD 1 Output ON/OFF signal 10 13 I/O Circuit Diagrams 3.9k Dimensions A (MLEP-A035W1LRD/MLEP-A070W1LRD) 75 150 (6) 150 150 150 10 10 130 15 130 15 10 120 10 120 55 55 (6) 150 (6) 75 150 B (MLEP-A035W3LRD/MLEP-A070W3LRD) 75 75 B(MLEP-A035W3LR/MLEP-A070W3LR) 75 A (MLEP-A035W1LR/MLEP-A070W1LR) (6) Dimensions 75 1 11 NC 15 Constant current control (the current can be changed) Supported (8bit digital) NC NC 2.5 VDC bias power supply output NC ON/OFF Output ON/OFF signal (-) Constant current control (the current can be changed) External light control Weight MLEP-A035W LR/MLEP-A070W LR Output ON/OFF signal (+) NC Output control system Connection Specifications 1 External 0-5V Analog dimmer signal input 0 to +45C Continuous DC output Cooling system 5V,24V 9 0 to +45C Continuous DC output Output system I/O Circuit Diagrams MLEP-A035W LR/MLEP-A070W LR 10 20 - Ratings and Specifications MLEP-A035W 1LR-100V Output W LR Models are available with a digital light adjustment and for either one or three channels. A wide voltage input (100 to 240 VAC) is supported, along with CE Marking. Ratings and Specifications AC Type 3Z4S-LT MLEP-A NEW MLEP Digtal Series Series Model Number Legend Maximum output current Models are available with an analog light adjustment and for either one or three channels. A wide voltage input (100 to 240 VAC) is supported, along with CE Marking. Model NEW MLEP 130 10 130 21 New Power Supplies for MG-Wave Series These new power supplies are designed specifically for Moritex Constant-current LED Lights (except for the MCEP Series). Even when combining with an LED Light from the broad lineup and possible applications, you can select the ideal Constant-current Power Supply for the required current consumption. The Power Supplies suppress heat generation and will make the most of the characteristics of any of the LED Light. External output controls and other features are also provided. A080/230W Model Number Legend 3Z4S-LT MLEK-A W LR A080/230W - V AC type Digital type (D) Output channel Maximum output current Analog Series (Total current: 0.8 A or 2.3 A) Series Digtal Series (Total current: 0.8 A or 2.3 A) Models are available with an analog light adjustment and for either one or two channels. A wide voltage input (100 to 240 VAC) is supported, along with CE Marking. Models are available with a digital light adjustment and for either one or two channels. A wide voltage input (100 to 240 VAC) is supported, along with CE Marking. Ratings and Specifications Ratings and Specifications Model MLEK-A080W1LR-100V MLEK-A080W1LR-200V MLEK-A080W2LR-100V MLEK-A080W2R-200V 100V 200V 100V 200V AC Type Two-channel maximum, output of 0.8A for each channel (for connection to all lights except the MCEP Series) 100 - 240V AC 50 / 60Hz 100 - 240V AC 50 / 60Hz A B Input current 0.3 / 0.15A (at AC 100/240V) 0.3 / 0.15A (at AC 100/240V) Surge current 15A or lower (at 100V AC) 35A or lower (at 240V AC) 15A or lower (at 100V AC) 35A or lower (at 240V AC) Input voltage Dimension 0 to +45C Continuous DC output Output control system Constant current control (the current can be changed) Constant current control (the current can be changed) External light control Supported (0 to 5V) Supported (0 to 5V) Supported (photocoupler insulation) Supported (photocoupler insulation) Supported (photocoupler insulation, control error) Supported (photocoupler insulation, control error) Lighting on/off function Error output Cooling system Installation Model Approximately 1.3kg B Input current 0.3 / 0.15A (at AC 100/240V) 0.3 / 0.15A (at AC 100/240V) Surge current 15A or lower (at 100V AC) 35A or lower (at 240V AC) 15A or lower (at 100V AC) 35A or lower (at 240V AC) 0 to +45C 0 to +45C Continuous DC output Continuous DC output Output control system Constant current control (the current can be changed) Constant current control (the current can be changed) External light control Supported (8bit digital) Supported ( for each channel, 8bit digital) Supported (photocoupler insulation) Supported (photocoupler insulation) Supported (photocoupler insulation, control error) Supported (photocoupler insulation, control error) Installation Natural air cooling Natural air cooling Horizontal installation on the rubber supports at the bottom of the unit Horizontal installation on the rubber supports at the bottom of the unit Approximately 1kg Approximately 1.3kg Weight MLEK-A230W1LR-200V MLEK-A230W2LR-100V MLEK-A230W2LR-200V 100V 200V 100V 200V Model MLEK-A230W1LRD-100V MLEK-A230W1LRD-200V MLEK-A230W2LRDB-100V MLEK-A230W2LRDB-200V 100V 200V 100V 200V AC Type Single-channel output of 2.3A (for connection to all lights except the MCEP Series) Two-channel maximum, output of 2.3A for each channel (for connection to all lights except the MCEP Series) 100 - 240V AC 50 / 60Hz 100 - 240V AC 50 / 60Hz A B Input current 0.7 / 0.4A (at AC 100/240V) 0.7 / 0.4A (at AC 100/240V) Surge current 15A or lower (at 100V AC) 35A or lower (at 240V AC) 15A or lower (at 100V AC) 35A or lower (at 240V AC) Output system 100 - 240V AC 50 / 60Hz Cooling system MLEK-A230W1LR-100V Output Single-channel output of 2.3A (for connection to all lights except the MCEP Series) Two-channel maximum, output of 2.3A for each channel (for connection to all lights except the MCEP Series) 100 - 240V AC 50 / 60Hz 100 - 240V AC 50 / 60Hz Input voltage Dimension 0 to +45C 0 to +45C Continuous DC output Continuous DC output Operating temperature 100 - 240V AC 50 / 60Hz A Error output Approximately 1kg Input voltage Two-channel maximum, output of 0.8A for each channel (for connection to all lights except the MCEP Series) Lighting on/off function Natural air cooling Dimension 200V Single-channel output of 0.8A (for connection to all lights except the MCEP Series) Output system Horizontal installation on the rubber supports at the bottom of the unit Output MLEK-A080W2RD-200V 100V Operating temperature Natural air cooling AC Type MLEK-A080W2LRD-100V 200V Output Horizontal installation on the rubber supports at the bottom of the unit Weight MLEK-A080W1LRD-200V 100V Input voltage 0 to +45C Output system MLEK-A080W1LRD-100V Dimension Continuous DC output Operating temperature Model AC Type Single-channel output of 0.8A (for connection to all lights except the MCEP Series) Output A B Input current 0.7 / 0.4A (at AC 100/240V) 0.7 / 0.4A (at AC 100/240V) Surge current 15A or lower (at 100V AC) 35A or lower (at 240V AC) 15A or lower (at 100V AC) 35A or lower (at 240V AC) 0 to +45C 0 to +45C Continuous DC output Continuous DC output Operating temperature Output system Output control system Constant current control (the current can be changed) Constant current control (the current can be changed) Output control system Constant current control (the current can be changed) Constant current control (the current can be changed) External light control Supported (0 to 5V dimmer signal / External VR input) Supported (0 to 5V dimmer signal / External VR input) External light control Supported (8bit digital) Supported ( for each channel, 8bit digital) Supported (photocoupler insulation) Supported (photocoupler insulation) Supported (photocoupler insulation, control error) Supported (photocoupler insulation, control error) forcible air cooling forcible air cooling Horizontal installation on the rubber supports at the bottom of the unit Horizontal installation on the rubber supports at the bottom of the unit Approximately 1.1kg Approximately 1.4kg Weight Connection Specifications External VR dimmer signal input External 0-5V Analog dimmer signal input input GND External 0-5V / external VR input switching 2.5 VDC bias power supply output NC NC 9 15 1 8 Output ON/OFF signal (+) Output ON/OFF signal (-) NC NC Control error signal (open collector) Control error signal (open emmitter) NC NC ON/OFF A Relay 5V,24V B(MLEK-A A LSB A Photo-coupler 5V=1.3k 24V=6.2k 1 2 6 10 170 190 47k 3.9k Transistor 5V=1.3k 24V=6.2k Error I/O Circuit Diagrams 15 MLEK-A080W LRD/MLEK-A230W LRD 1 8 5V,24V 8bit digital input 20 (LSB) 8bit digital input 21 8bit digital input 22 8bit digital input 23 8bit digital input 24 8bit digital input 25 8bit digital input 26 8bit digital input 27 (MSB) 5V COMMON A A A LSB 9 1 47k 3.9k 5V Relay Photo-coupler Transistor 47k A MSB 8 47k 11 12 13 Dimensions 330 A (MLEK-A 5V,24V 5V,24V W1LRD) B (MLEK-A W2LRD) A B B ON/OFF Error 10 3.9k 5V 330 11 5V=1.3k 24V=6.2k 5V 5k 5V 3.9k 5V 5 6 9 10 10k 55 75 COMMON (+) Output ON/OFF signal Control error signal output NC NC NC NC 5V 5V,24V 5V,24V W2LR) 110 6 90 Approximately 1.4kg MLEK-A080W LRD/MLEK-A230W LRD 5V,24V B 130 150 Approximately 1.1kg 9 A 10 forcible air cooling Horizontal installation on the rubber supports at the bottom of the unit Connection Specifications 0-5V 55 75 forcible air cooling Horizontal installation on the rubber supports at the bottom of the unit Weight B W1LR) Installation MLEK-A080W LR/MLEK-A230W LR Dimensions A (MLEK-A Supported (photocoupler insulation, control error) Cooling system I/O Circuit Diagrams MLEK-A080W LR/MLEK-A230W LR Supported (photocoupler insulation) Supported (photocoupler insulation, control error) 10k * Note: The AC power cable that is enclosed depends on the voltage. Be sure to use a suitable power supply for the country in which the Controller is used. 2.5V Ref 55 75 10 130 150 200V 55 75 6 Installation Supported (photocoupler insulation) 110 Cooling system Error output 6 Error output Lighting on/off function 90 Lighting on/off function 22 NEW MLEK 10 170 190 100V CE (PS) E/UL/CSA (PS) E Adapter (for use in Japan only) 23 NEW MLEK Series Model Number Legend Multichannel series 3Z4S-LT MLEK- D770W4LRD- Optional Accessories V AC type * When ordering, provide the specific model number after "SZ4S-LT" (example: SZ4S-LT MDF-DR10). Multichannel series Options for lights The following optional accessories are available to improve the functionality of the lighting devices. Models are available with a digital light adjustment and for four channels. A wide voltage input (100 to 240 VAC) is supported, along with Rohs compliance. The digital light adjustment provides the previous 8-bit, 256-step control and a new 10-bit, 1,024-step control. Diffusion plate:MDF Series The MDF series features a diffusion plate that increases the light diffusion and reduces reflection and glare from the element. Model New *CE Marking. Ratings and Specifications Model MLEK-D770W4LRD-100V MLEK-D770W4LRD-200V 100V 200V AC Type 4-channel output Total max. 7.7A (CH1 CH3:max. 2.3A CH4:max. 0.8A) (for connection to all lights except the MCEP Series) Output Input voltage 100 - 240V AC 50 / 60Hz Input current A 1.7/0.8 A (at AC 100/240V) Surge current 18A or lower (at 100V AC) 41A or lower (at 230V AC) Dimension Operating temperature Diffusion plate for direct-ring lights MDRL-CR (CG,CB,CW) for 56 MDF-LR25 Diffusion plate for low-angle ring lights MLRL-CR (CG,CB,CW) for 25 MDF-LR48 Diffusion plate for low-angle ring lights MLRL-CR (CG,CB,CW) for 48 MDF-LR68 Diffusion plate for low-angle ring lights MLRL-CR (CG,CB,CW) for 68 MDF-LR100 Diffusion plate for low-angle ring lights MLRL-CR (CG,CB,CW) for 100 MDF-BR5015 Diffusion plate for bar lights MBRL-CR (CG,CB,CW) for 5015 MDF-BR7530 Diffusion plate for bar lights MBRL-CR (CG,CB,CW) for 7530 MDF-BR13015 Diffusion plate for bar lights MBRL-CR (CG,CB,CW) for 13015 Product type Compatible light models Simulated coaxial light polarizing plate MSCL-CR (CG,CB,CW) for 56 Simulated coaxial light polarizing plate MSCL-CR (CG,CB,CW) for 72 New MPL-SC105 Simulated coaxial light polarizing plate MSCL-CR (CG,CB,CW) for 105 Supported (photocoupler insulation, control error) MPL-DR10-B Polarizing plate for direct-ring lights MDRL-CR (CG,CB,CW) for 10 forcible air cooling MPL-DR16-B Polarizing plate for direct-ring lights MDRL-CR (CG,CB,CW) for 16 Horizontal installation on the rubber supports at the bottom of the unit MPL-DR28-B Polarizing plate for direct-ring lights MDRL-CR (CG,CB,CW) for 28 Approximately 2kg MPL-DR31-B Polarizing plate for direct-ring lights MDRL-CR (CG,CB,CW) for 31 MPL-DR50-B Polarizing plate for direct-ring lights MDRL-CR (CG,CB,CW) for 50 MPL-DR56-B Polarizing plate for direct-ring lights MDRL-CR (CG,CB,CW) for 56 MPL-BR5015-B Polarizing plate for bar lights MBRL-CR (CG,CB,CW) for 5015 MPL-BR7530-B Polarizing plate for bar lights MBRL-CR (CG,CB,CW) for 7530 MPL-BR13015-B Polarizing plate for bar lights MBRL-CR (CG,CB,CW) for 13015 I/O Circuit Diagrams An asterisk (*) in "compatible light models" refers to any LED color (R,G,B or W) of the light. MLEK-D770W4LRD 10bit digital input 20 (10bit/LSB) 10bit digital input 21 10bit digital input 20 (8bit/LSB) 10bit digital input 23 10bit digital input 24 10bit digital input 25 10bit digital input 26 10bit digital input 27 10bit digital input 28 10bit digital input 29 (MSB) COMMON(+) CH1 Output ON/OFF signal CH2 Output ON/OFF signal Adapter : MAD Series The MAD series is essential when a diffusion or polarizing plate is attached to a ring light. Model Product type How to use the MAD series Compatible light models MAD-DR10 Plate attachment adapter for direct-ring lights MDRL-CR (CG,CB,CW) for 10 MAD-DR16 Plate attachment adapter for direct-ring lights MDRL-CR (CG,CB,CW) for 16 MAD-DR28 Plate attachment adapter for direct-ring lights MDRL-CR (CG,CB,CW) for 28 Diffusion or polarizing plate MAD-DR31 Plate attachment adapter for direct-ring lights MDRL-CR (CG,CB,CW) for 31 MAD-DR50 Plate attachment adapter for direct-ring lights MDRL-CR (CG,CB,CW) for 50 MAD series adapter (fastened with three screws) MAD-DR56 Plate attachment adapter for direct-ring lights MDRL-CR (CG,CB,CW) for 56 Ring light An asterisk (*) in "compatible light models" refers to any LED color (R,G,B or W) of the light. Light control film : MLM Series A (MLEK-D770W4LRD) MLEK-D770W4LRD OUT4 FINE OUT3 OUT2 OUT1 FAN3 FAN2 FAN1 F F EXT 1 CH 2 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 0 0 0 0 MAINS Supply CH 3 CH 4 0 REMO 55 100 The MLM series are resin films that transform diffused light into near-parallel light. Attached to a simulated coaxiallight, it makes the light distribution pattern smoother. Usage for the MLM Series Cross-section of pseudo coaxial epi-illumination Haif mirror Lighting part (Mounted in groove) 0 MANU 200 220 Model Product type Compatible light models Lighting intensity distribution charateristics of the MSCL-CR105 MLM-SC56 Light control fi lm for simulated coaxial lights MSCL-CR (CG,CB,CW) for 56 MLM-SC74 Light control fi lm for simulated coaxial lights MSCL-CR (CG,CB,CW) for 74 MLM-SC105 Light control fi lm for simulated coaxial lights MSCL-CR (CG,CB,CW) for 105 2D luminance level diagram 2D luminance level diagram An asterisk (*) in "compatible light models" refers to any LED color (R,G,B or W) of the light. Lighting intensity distribution characteristics without a light control film 24 Diffusion board COARSE CH 1 120 MDRL-CR (CG,CB,CW) for 50 MDF-DR56 MPL-SC74 Dimensions POWER Diffusion plate for direct-ring lights MPL-SC56 Connection Specifications CORPORATION MDRL-CR (CG,CB,CW) for 31 MDF-DR50 New Weight MLEK-D770W4LRD Diffusion plate for direct-ring lights New Cooling system 13 MDRL-CR (CG,CB,CW) for 28 MDF-DR31 MDQL-CR(CG,CB,CW) for 108, 4 pieces/set Supported (photocoupler insulation) 25 Diffusion plate for direct-ring lights Square oblique light polarizing plate Lighting on/off function CH3 Output ON/OFF signal CH4 Output ON/OFF signal CH1 Control error signal CH2 Control error signal CH3 Control error signal CH4 Control error signal CH Select CH Select Write TRG NC NC NC MDRL-CR (CG,CB,CW) for 16 MDF-DR28 MPL-DQ108 Supported ( for each channel, 8bit digital or 10 bit digital) 1 MDRL-CR (CG,CB,CW) for 10 Diffusion plate for direct-ring lights New External light control 14 Diffusion plate for direct-ring lights MDF-DR16 Model Continuous DC output MLEK-D770W4LRD MDF-DR10 The MPL series polarizing plates are attached to LEDs in order to reduce unwanted glare and reflection during image processing. Constant current control (the current can be changed) Installation MDQL-CR(CG,CB,CW) for 108, 4 pieces/set Polarizing plate:MPL Series Output control system Error output Compatible light models Square oblique light diffusion plate An asterisk (*) in "compatible light models" refers to any LED color (R,G,B or W) of the light. 0 to +45C Output system Product type MDF-DQ108 Lighting intensity distribution characteristics with a light control film (with the power source volume increased) 25 Options for bridging lights with lenses The following optional adapters are designed to be used with Moritex's lenses. Simulated Coaxial Light/CCTV Lens Adapter: MLA-SC Series The MLA-SC Series enables small siulated coaxial lights to be mounted at the end of CCTV lenses. Model Product type How to use the MLA-SC series Compatible light models MLA-SCBS Mount base for simulated coaxial lights MSCL-C 24/39/56 MLA-SCM255 Base/lens adapter for simulated coaxial lights M25.5P0.5 lens MLA-SCM270 Base/lens adapter for simulated coaxial lights M27P0.5 lens MLA-SCM305 Base/lens adapter for simulated coaxial lights M30.5P0.5 lens CCTV lens Base/lens adapter Base unit Simulated coaxial light An asterisk (*) in "compatible light models" refers to any LED color (R,G,B or W) of the light. *Do not apply any unnecessary load to the lens. The rotation angle is adjustable after fastening the light to the lens. MML/CCTV Lens Adapter The adapter can be easily used in combination with Moritex's lenses. Model Product type Compatible light models How to use the MLA-DR series MLA-DR1616 Lens attachment adapter MDRL-C 16 and R-16 mm lenses MLA-DR3125 Lens attachment adapter MDRL-C 31 and R-25 mm lenses MLA-DR3130 Lens attachment adapter MDRL-C 31 and R-30 mm lenses MLA-DR31M255 Lens attachment adapter MDRL-C 31 and M25.5P0.5 lenses MLA-DR31M270 Lens attachment adapter MDRL-C 31 and M27P0.5 lenses MLA-DR31M305 Lens attachment adapter MDRL-C 31 and M30.5P0.5 lenses Lens MLA-DR series Direct-ring light An asterisk (*) in "compatible light models" refers to any LED color (R,G,B or W) of the light. Sharp-cut Filter R64 Series These Files can be attached to the end of a CCTV lens to prevent light interference when using red light. Model Product type Size ML-R64-25 Sharp-cut filter for mounting to end of lens M25.5 P0.5 lenz ML-R64-27 Sharp-cut filter for mounting to end of lens M27 P0.5 lenz ML-R64-30 Sharp-cut filter for mounting to end of lens M30.5 P0.5 lenz Cables Cable Diagram Model Product type Applications Length M-RCB401L A 4-pin type extension cable M-RCB402L A 4-pin type extension cable M-RCB403L A 4-pin type extension cable M-RCB301L B 3-pin type extension cable M-RCB302L B 3-pin type extension cable M-RCB303L B 3-pin type extension cable M-XS402C C Pin type extension cable M-XS405C C Pin type extension cable M-XS410C C Pin type extension cable M-RCB301XS D Pin type MSPP-MLEP-A070 conversion cable M-RCB001L E 2-pin type extension cable M-RCB002L E 2-pin type extension cable M-RCB003L E 2-pin type extension cable 3m MC-EXC-02 Cable for DSUB15 pin external control 2m MC-EXC-07 Cable for DSUB15 pin external control 1m For all lights (except the MCEP series) 2m 3m 1m For the MCEP series 2m 3m 2m 5m For the MSPP series 10m For the MSPP series and MLEP-A070 1m 1m For power sources for built-in fans 2m C (M-XS4 C) D (M-RCB301XS) 4P RoHS L*Straight connection) (1000,2000,3000) 1P 1 (1000,2000,3000) 1P 1 2 4 3 Female 40.5 10020 X Male 44.7 2 1 3 4 E (M-RCB0 3P 1P 0 12+2-0 4 -2 22+10 -0 L*Straight connection) 2P 2P 1P 26 10020 1000+50 -0 6 1P 3P White/yellow (no connection) 0+0 -2 43.2 RoHS L*Straight connection) 3P 39.55 4 B (M-RCB3 12 3 14.9 2 1P 5.7 dia . A (M-RCB4 4P 40.05 Cable Diagrams (1000,2000,3000) 1P 27