HD74LV393AFPEL - Renesas Electronics

To our custo mers,

Old Company Name in Catalogs and Other Documents

On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology

Corporation, and Renesas Electronics Corpor ation took over all the business of both

companies. Therefore, althoug h the old com pany name remains in this docum ent, it is a valid

Renesas Electronics document. W e appreciate your understanding.

Renesas Electronics website: http://www.renesas.com

April 1st, 2010

Renesas Electronics Corporation

Issued by: Renesas Electronics Corporation (http://www.renesas.com)

Send any inquiries to http://www.renesas.com/inquiry.

Notice

1. All information included in this document is current as of the date this document is issued. Such information, however, is

subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please

confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to

additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website.

2. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights

of third parties by or arising from the use of Renesas Electronics products or technical information described in this document.

No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights

of Renesas Electronics or others.

3. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part.

4. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of

semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software,

and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by

you or third parties arising from the use of these circuits, software, or information.

5. When exporting the products or technology described in this document, you should comply with the applicable export control

laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas

Electronics products or the technology described in this document for any purpose relating to military applications or use by

the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and

technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited

under any applicable domestic or foreign laws or regulations.

6. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics

does not warrant that such information is error free. Ren esas E lectronics assumes no liability whatsoever for any da mages

incurred by you resulting from errors in or omissions from the information included herein.

7. Renesas Electronics products are classified acco rding to the following three quality grades: “Standard”, “High Quality”, and

“Specific”. The recommended applications for each Renesas Electronics product depends on the product’s quality grade, as

indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular

application. You may not use any Renesas Electronics product for any application categorized as “Specific” without the prior

written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for

which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way

liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an

application categorized as “Specific” or for which the product is not intended where you have failed to obtain the prior written

consent of Renesas Electronics. The quality grade of each Renesas Electronics product is “Standard” unless otherwise

expressly specified in a Renesas Electronics data sheets or data books, et c.

“Standard”: Computers; office equipment; communications equipment; test and measurement equipment; audio and visual

equipment; home electro nic app liances; machine tool s; p ersonal electron ic equipment; and indu strial robots .

“High Quality”: Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-

crime systems; safety equipment; and medical equipment not specifically designed for life support.

“Specific”: Aircraft; aerospace equ i pment; submersible repeaters; nu clear reactor control systems; medical equipment or

systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare

interven tion (e.g. excision, et c.), and any oth er applications or purposes that pose a direct th reat to human life.

8. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics,

especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation

characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or

damages arising out of the use of Renesas Electronics products beyond such specified ranges.

9. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have

specific chara cterist ics such as the o ccurren ce of failure at a certai n rate an d malfunct ion s under certai n u se cond ition s. Further,

Renesas Electronics pr oducts are not subject to radiation resi stance design. Please be sure to implement safety measures to

guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a

Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire

control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because

the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system

manufactured by you.

10. Please contact a Renesas Electronics sales office for det ai ls as to enviro nmental matters such as the en vi ronmental

compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable

laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS

Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with

applicable laws and regulations.

11. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas

Electronics.

12. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this

document or Renesas Electronics products, or if you have any other inquiries.

(Note 1) “Renesas Electronics” as us ed in this document means Renesas Electronics Corporation and also includes its majo ri ty-

owned subsidiaries.

(Note 2) “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics.

Rev.3.00 Jun. 28, 2004 page 1 of 10

HD74LV393A

Dual 4-bit Binary Counters REJ03D0333–0300Z

(Previous ADE-205-2 76A (Z))

Rev.3.00

Jun. 28, 2004

Description

The HD74LV393A contain two 4-bit ripple carry binary counters, which can be cascaded to create a single divide-by-

256 counter.

The HD74LV393A is incremented on the high to low transition (negative edge) of the clock input, and each has an

independent clear input. When clear is set high all four bits of each counter is set to a low level. This enables count

truncation and allows the implementation of divide-by-N counter configurations.

Low-voltage and high-speed operation is suitable for the battery-powered products (e.g., notebook computers), and the

low-power consumption extends the battery life.

Features

• VCC = 2.0 V to 5.5 V operation

• All inputs VIH (Max.) = 5.5 V (@VCC = 0 V to 5.5 V)

• All outputs VO (Max.) = 5.5 V (@VCC = 0 V)

• Typical VOL ground bounce < 0.8 V (@VCC = 3.3 V, Ta = 25°C)

• Typical VOH undershoot > 2.3 V (@VCC = 3.3 V, Ta = 25°C)

• Output current ±6 mA (@VCC = 3.0 V to 3.6 V), ±12 mA (@VCC = 4.5 V to 5.5 V)

• Ordering Information

Part Name Package Type Package Code Package

Abbreviation Taping Abbreviation

(Quantity)

HD74LV393AFPEL SOP–14 pin(JEITA) FP–14DAV FP EL (2,000 pcs/reel)

HD74LV393ARPEL SOP–14 pin(JEDEC) FP–14DNV RP EL (2,500 pcs/reel)

HD74LV393ATELL TSSOP–14 pin TTP–14DV T ELL (2,000 pcs/reel)

Note: Please consult the sales office for the above package availability.

HD74LV393A

Rev.3.00 Jun. 28, 2004 page 2 of 10

Function Table

Inputs

CLK CLR Output

XHL

H L No change

L L No change

↑L No change

↓L Count up

Note: H: High level

L: Low level

X: Immaterial

↑: Low to high transition

↓: High to low transition

Pin Arrangement

2CLK

2CLR

2QA

2QB

2QC

1CLK

1CLR

1QA

1QB

1QC

1QD

GND 2QD

(Top view)

HD74LV393A

Rev.3.00 Jun. 28, 2004 page 3 of 10

Absolute Maximum Ratings

Item Symbol Ratings Unit Conditions

Supply voltage range VCC –0.5 to 7.0 V

Input voltage range*1VI–0.5 to 7.0 V

–0.5 to VCC + 0.5 Output: H or LOutput voltage range*1, 2 VO–0.5 to 7.0 VVCC: OFF

Input clamp current IIK –20 mA VI < 0

Output clamp current IOK ±50 mA VO < 0 or VO > VCC

Continuous output current IO±25 mA VO = 0 to VCC

Continuous current through

VCC or GND ICC or

IGND

±50 mA

785 SOPMaximum power dissipation at

Ta = 25°C (in still air)*3PT500 mW TSSOP

Storage temperature Tstg –65 to 150 °C

Notes: The absolute maximum ratings are values, which must not individually be exceeded, and furthermore, no two of

which may be realized at the same time.

1. The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are

observed.

2. This value is limited to 5.5 V maximum.

3. The maximum package power dissipation was calculated using a junction temperature of 150°C.

Recommended Operating Conditions

Item Symbol Min Max Unit Conditions

Supply voltage range VCC 2.0 5.5 V

Input voltage range VI05.5V

Output voltage range VO0V

CC VH or L

— –50 µAV

CC = 2.0 V

—–2 V

CC = 2.3 to 2.7 V

—–6 V

CC = 3.0 to 3.6 V

IOH

— –12

VCC = 4.5 to 5.5 V

—50µAV

CC = 2.0 V

—2 V

CC = 2.3 to 2.7 V

—6 V

CC = 3.0 to 3.6 V

Output current

IOL

—12

VCC = 4.5 to 5.5 V

0 200 VCC = 2.3 to 2.7 V

0 100 VCC = 3.0 to 3.6 V

Input transition rise or fall rate ∆t /∆v

020

ns/V

VCC = 4.5 to 5.5 V

Operating free-air temperature Ta –40 85 °C

Note: Unused or floating inputs must be held high or low.

HD74LV393A

Rev.3.00 Jun. 28, 2004 page 4 of 10

Logic Diagram

QA QB QC QD

CLK

CLR

Timing Diagram

CLK

CLR

HD74LV393A

Rev.3.00 Jun. 28, 2004 page 5 of 10

DC Electrical Characteristics

Ta = –40 to 85°C

Item Symbol VCC (V)*Min Typ Max Unit Test Conditions

2.0 1.5 — —

2.3 to 2.7 VCC × 0.7 — —

3.0 to 3.6 VCC × 0.7 — —

VIH

4.5 to 5.5 VCC × 0.7 — —

2.0 — — 0.5

2.3 to 2.7 — — VCC × 0.3

3.0 to 3.6 — — VCC × 0.3

Input voltage

VIL

4.5 to 5.5 — — VCC × 0.3

Min to Max VCC – 0.1 — — IOH = –50 µA

2.3 2.0 — — IOH = –2 mA

3.0 2.48 — — IOH = –6 mA

VOH

4.5 3.8 — —

IOH = –12 mA

Min to Max — — 0.1 IOL = 50 µA

2.3 — — 0.4 IOL = 2 mA

3.0 — — 0.44 IOL = 6 mA

Output voltage

VOL

4.5 — — 0.55

IOL = 12 mA

Input current IIN 0 to 5.5 — — ±1 µAV

IN = 5.5 V or GND

Quiescent supply

current ICC 5.5 — — 20 µAV

IN = VCC or GND, IO = 0

Output leakage

current IOFF 0——5µAV

I or VO = 0 V to 5.5 V

Input capacitance CIN 3.3 — 1.7 — pF VI = VCC or GND

Note: For conditions shown as Min or Max, use the appropriate values under recommended operating con ditions.

Switching Characteristics

VCC = 2.5 ± 0.2 V

Ta = 25°C Ta = –40 to 85°C

Item Symbol Min Typ Max Min Max Unit Test

Conditions FROM

(Input) TO

(Output)

50 90 — 40 — CL = 15 pF

Maximum clock

frequency fmax 30 60 — 25 — MHz CL = 50 pF

— 11.8 17.7 1.0 20.5 CL = 15 pF

— 15.1 21.3 1.0 24.5 CL = 50 pF QA

— 13.4 20.3 1.0 23.5 CL = 15 pF

— 16.7 23.9 1.0 27.5 CL = 50 pF QB

— 14.9 22.5 1.0 26.0 CL = 15 pF

— 18.2 26.1 1.0 30.0 CL = 50 pF QC

— 16.2 24.2 1.0 28.0 CL = 15 pF

tPLH/tPHL

— 19.5 27.8 1.0 32.0 CL = 50 pF

CLK

— 10.8 14.8 1.0 17.0 CL = 15 pF

Propagation

delay time

tPHL — 14.2 17.4 1.0 20.0

CL = 50 pF CLR Qn

Setup time tsu 6.0 — — 6.0 — ns CLR L before CLK ↓

5.0 — — 5.0 — CLR HPulse width tw5.0 — — 5.0 — ns

CLK H or L

HD74LV393A

Rev.3.00 Jun. 28, 2004 page 6 of 10

Switching Characteristics (cont)

VCC = 3.3 ± 0.3 V

Ta = 25°C Ta = –40 to 85°C

Item Symbol Min Typ Max Min Max Unit Test

Conditions FROM

(Input) TO

(Output)

75 120 — 65 — CL = 15 pFMaximum clock

frequency fmax 45 65 — 35 — MHz CL = 50 pF

— 8.6 13.2 1.0 15.5 CL = 15 pF

— 11.1 16.7 1.0 19.0 CL = 50 pF QA

— 10.2 15.8 1.0 18.5 CL = 15 pF

— 12.7 19.3 1.0 22.0 CL = 50 pF QB

— 11.7 18.0 1.0 21.0 CL = 15 pF

— 14.2 21.5 1.0 24.5 CL = 50 pF QC

— 13.0 19.7 1.0 23.0 CL = 15 pF

tPLH/tPHL

— 15.5 23.2 1.0 26.5 CL = 50 pF

CLK

— 7.9 12.3 1.0 14.5 CL = 15 pF

Propagation

delay time

tPHL — 10.4 15.8 1.0 18.0

CL = 50 pF CLR Qn

Setup time tsu 5.0 — — 5.0 — ns CLR L before CLK ↓

5.0 — — 5.0 — CLR HPulse width tw5.0 — — 5.0 — ns

CLK H or L

VCC = 5.0 ± 0.5 V

Ta = 25°C Ta = –40 to 85°C

Item Symbol Min Typ Max Min Max Unit Test

Conditions FROM

(Input) TO

(Output)

125 170 — 105 — CL = 15 pFMaximum clock

frequency fmax 85 115 — 75 — MHz CL = 50 pF

— 5.8 8.5 1.0 10.0 CL = 15 pF

— 7.3 10.5 1.0 12.0 CL = 50 pF QA

— 6.8 9.8 1.0 11.5 CL = 15 pF

— 8.3 11.8 1.0 13.5 CL = 50 pF QB

— 7.7 11.2 1.0 13.0 CL = 15 pF

— 9.2 13.2 1.0 15.0 CL = 50 pF QC

— 8.5 12.5 1.0 14.5 CL = 15 pF

tPLH/tPHL

— 10.0 14.5 1.0 16.5 CL = 50 pF

CLK

— 5.4 8.1 1.0 9.5 CL = 15 pF

Propagation

delay time

tPHL — 6.9 10.1 1.0 11.5

CL = 50 pF CLR Qn

Setup time tsu 4.0 — — 4.0 — ns CLR L before CLK ↓

5.0 — — 5.0 — CLR HPulse width tw5.0 — — 5.0 — ns

CLK H or L

Operating Characteristics

CL = 50 pF

Ta = 25°C

Item Symbol VCC (V) Min Typ Max Unit Test Conditions

3.3 — 12.0 —Power dissipation capacitance CPD 5.0 — 15.0 — pF f = 10 MHz

HD74LV393A

Rev.3.00 Jun. 28, 2004 page 7 of 10

Noise Characteristics

CL = 50 pF

Ta = 25°C

Item Symbol VCC = (V) Min Typ Max Unit Test Conditions

Quiet output, maximum

dynamic VOL

VOL (P) 3.3 — 0.4 0.8 V

Quiet output, minimum

dynamic VOL

VOL (V) 3.3 — –0.4 –0.8 V

Quiet output, minimum

dynamic VOH

VOH (V) 3.3 — 3.2 — V

High-level dynamic input

voltage VIH (D) 3.3 2.31——V

Low-level dynamic input

voltage VIL (D) 3.3 ——0.99V

Test Circuit

Note: C includes the probe and jig capacitance.

Measurement point

HD74LV393A

Rev.3.00 Jun. 28, 2004 page 8 of 10

PHL

0 V

PHL

PLH

10 %

90 %

50 % V

50 % V 10 %

90 %

CLR CLK

0 V

50 % V

CLR

CLK

10 %

50 % V

10 %

PHL

PLH

50 % V

10 %

90 %

90 % 90 %

•

Waveforms

−

•

Waveforms

−

1. Input waveform: PRR ≤ 10 MHz, Zo = 50 Ω, t ≤ 3 ns, t ≤ 3 ns

2. The output are measured one at a time with one transition per measurement.

Notes:

HD74LV393A

Rev.3.00 Jun. 28, 2004 page 9 of 10

Package Dimensions

Package Code

JEDEC

JEITA

Mass

(reference value)

FP-14DAV

—

Conforms

0.23 g

*Ni/Pd/Au plating

*0.20 ± 0.05

*0.40 ± 0.06

0.70 ± 0.20

0.12

0.15

0˚ – 8˚

0.10 ± 0.10

2.20 Max

5.5

10.06

1.42 Max

14 8

10.5 Max

+ 0.20

– 0.30

7.80

1.15

1.27

As of January, 2003

Unit: mm

Package Code

JEDEC

JEITA

Mass

(reference value)

FP-14DNV

Conforms

0.13 g

0˚ – 8˚

1.27

14 8

0.15

0.25

1.75 Max 3.95

*0.20 ± 0.05

8.65

9.05 Max

*0.40 ± 0.06

0.14+ 0.11

– 0.04

0.635 Max 6.10+ 0.10

– 0.30

0.60+ 0.67

– 0.20

1.08

*Ni/Pd/Au plating

As of January, 2003

Unit: mm

HD74LV393A

Rev.3.00 Jun. 28, 2004 page 10 of 10

Package Code

JEDEC

JEITA

Mass

(reference value)

TTP-14DV

—

0.05 g

*Ni/Pd/Au plating

0.50 ± 0.10

0˚ – 8˚

*0.15 ± 0.05

6.40 ± 0.20

0.10

1.10 Max

0.13 M

0.65

14 8

4.40

5.00

5.30 Max

0.83 Max

*0.20 ± 0.05

0.07

+0.03

–0.04

1.0

As of January, 2003

Unit: mm

Keep safety first in your circuit designs!

1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble

may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage.

Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary

circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap.

Notes regarding these materials

1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp. product best suited to the customer's

application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp. or a third party.

2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data,

diagrams, charts, programs, algorithms, or circuit application examples contained in these materials.

3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of

publication of these materials, and are subject to change by Renesas Technology Corp. without notice due to product improvements or other reasons. It is

therefore recommended that customers contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor for the latest product

information before purchasing a product listed herein.

The information described here may contain technical inaccuracies or typographical errors.

Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors.

Please also pay attention to information published by Renesas Technology Corp. by various means, including the Renesas Technology Corp. Semiconductor

home page (http://www.renesas.com).

4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to

evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corp. assumes

no responsibility for any damage, liability or other loss resulting from the information contained herein.

5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life

is potentially at stake. Please contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor when considering the use of a

product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater

use.

6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in whole or in part these materials.

7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and

cannot be imported into a country other than the approved destination.

Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited.

8. Please contact Renesas Technology Corp. for further details on these materials or the products contained therein.

Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan

http://www.renesas.co

Renesas Technology America, Inc.

450 Holger Way, San Jose, CA 95134-1368, U.S.A

Tel: <1> (408) 382-7500 Fax: <1> (408) 382-7501

Renesas Technology Europe Limited.

Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, United Kingdom

Tel: <44> (1628) 585 100, Fax: <44> (1628) 585 900

Renesas Technology Europe GmbH

Dornacher Str. 3, D-85622 Feldkirchen, Germany

Tel: <49> (89) 380 70 0, Fax: <49> (89) 929 30 11

Renesas Technology Hong Kong Ltd.

7/F., North Tower, World Finance Centre, Harbour City, Canton Road, Hong Kong

Tel: <852> 2265-6688, Fax: <852> 2375-6836

Renesas Technology Taiwan Co., Ltd.

FL 10, #99, Fu-Hsing N. Rd., Taipei, Taiwan

Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999

Renesas Technology (Shanghai) Co., Ltd.

26/F., Ruijin Building, No.205 Maoming Road (S), Shanghai 200020, China

Tel: <86> (21) 6472-1001, Fax: <86> (21) 6415-2952

Renesas Technology Singapore Pte. Ltd.

1, Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632

Tel: <65> 6213-0200, Fax: <65> 6278-8001

RENESAS SALES OFFICES

olophon .1