GENERAL DATA
Life Expectancy Minimum operations
Mechanical 1 x 107
Electrical 1 x 105at 1.0 A 120 VAC Res.
Operate Time (typical) 6 ms at nominal coil voltage
Release Time (typical) 5 ms at nominal coil voltage
(with no coil suppression)
Dielectric Strength 1500 Vrms contact to coil
(at sea level for 1 min.) 500 Vrms between open contacts
1500 Vrms contact set to contact set
Insulation Resistance 1000 megohms min. at 20°C, 500 VDC,
50% RH
Dropout Greater than 10% of nominal coil voltage
Ambient Temperature At nominal coil voltage
Operating -40°C (-40°F) to 70°C (158°F) standard
-40°C (-40°F) to 80°C (176°F) sensitive
-40°C (-40°F) to 85°C (185°F) ultra-sensitive
Storage -40°C (-40°F) to 105°C (221°F)
Vibration 1.5 mm DA at 10–55 Hz
Shock 50 g 11 ms 1/2sine
Enclosure P.B.T. polyester
Terminals Tinned copper alloy
Max. Solder Temp. 270°C (518°F)
Max. Solder Time 5 seconds
Max. Solvent Temp. 80°C (176°F)
Max. Immersion Time 30 seconds
Weight 4.5 grams
COIL
Power
At Pickup Voltage 180 mW standard
(typical) 100 mW sensitive
84 mW ultra-sensitive
Max. Continuous 1.2 W at 20°C (68°F)
Dissipation
Temperature Rise 34°C (61°F) standard
23°C (41°F) sensitive
19°C (34°F) ultra-sensitive
Temperature Max. 105°C (221°F)
CONTACTS
Arrangement DPDT (2 Form C)
Ratings Resistive load:
Max. switched power: 24 W or 125 VA
Max. switched current: 2 A
Max. switched voltage: 150 VDC or 220 VAC
Rated Load
UL 2.0 A at 30 VDC
1.0 A at 125 VAC
Material Silver, gold plated
Resistance < 50 milliohms initially
AZ826
2/20/08W
SUBMINIATURE
ULTRA-SENSITIVE
DIP RELAY
FEATURES
•Low profile for compact board spacing
•DC coils to 24 VDC
•Bifurcated crossbar contacts
•Ultra-sensitivity, 84 mW pickup
•Life expectancy to 10 million operations
•High switching capacity, 24 W, 125 VA
•Fits standard 16 pin IC socket
•Epoxy sealed for automatic wave soldering and cleaning
•Meets FCC Part 68.302 1500 V lightning surge
•Meets FCC Part 68.304 1000 V dielectric
•UL, CUR file E43203
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Other coil resistances and sensitivities available upon request.
4. Specifications subject to change without notice.
RELAY ORDERING DATA
STANDARD COIL SPECIFICATIONS
Nominal Coil Max. Continuous Coil Resistance Must Operate ORDER NUMBER
VDC VDC ± 10% VDC
3 5.5 25 2.1 AZ826-2C-3DME
5 9.2 70 3.5 AZ826–2C–5DME
6 11.0 100 4.2 AZ826–2C–6DME
9 16.4 225 6.3 AZ826–2C–9DME
12 21.9 400 8.4 AZ826–2C–12DME
24 43.8 1600 16.8 AZ826–2C–24DME
SENSITIVE COIL SPECIFICATIONS
Nominal Coil Max. Continuous Coil Resistance Must Operate ORDER NUMBER
VDC VDC ± 10% VDC
3 7.3 45 2.1 AZ826-2C-3DSE
5 12.2 125 3.5 AZ826–2C–5DSE
6 14.7 180 4.2 AZ826–2C–6DSE
9 22.0 405 6.3 AZ826–2C–9DSE
12 29.0 720 8.4 AZ826–2C–12DSE
24 52.3 2880 16.8 AZ826–2C–24DSE
ULTRA-SENSITIVE COIL SPECIFICATIONS
Nominal Coil Max. Continuous Coil Resistance Must Operate ORDER NUMBER
VDC VDC ± 10% VDC
3 8.5 60 2.3 AZ826–2C–3DSSE
4.5 12.7 135 3.4 AZ826–2C–4.5DSSE
5 14.2 167 3.8 AZ826–2C–5DSSE
6 17.0 240 4.5 AZ826–2C–6DSSE
9 25.4 540 6.8 AZ826–2C–9DSSE
12 33.9 960 9.0 AZ826–2C–12DSSE
24 67.9 3840 18.0 AZ826–2C–24DSSE
AZ826
2/20/08W
MECHANICAL DATA
WIRING DIAGRAM PC BOARD LAYOUT
1
16
.795 Max.
(20.2 Max.)
.010
(0.25)
.028
(0.72)
.472 Max.
(12.0 Max.)
.138
(3.5)
.390 Max.
(9.9 Max.)
.016
(.04)
.200
(5.08)
.200
(5.08)
.300
(7.62 )
.300
(7.62)
.0.39 DIA
(0.8)
8 HOLES
Viewed toward terminalsViewed toward terminals
4
13 11 9
6 8
Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010"
