WzzardTM Mesh Wireless Sensor for Industrial Applications Models BB-WSD2C31010, BB-WSD2M31010, BB-WSD2C21150, BB-WSD2C06010, BB-WSD2M06010 www.advantech-bb.com PRODUCT FEATURES + Ultra-low power 802.15.4e SmartMesh IP technology + Communicates with SmartSwarm-342 gateway via highly scalable and reliable wireless mesh networks + Connect to industry standard analog or digital sensors + Rugged, IP67 rated, fiber reinforced polyester PBT enclosure + MQTT and JSON IoT protocol to application platform + UL, C1/D2 approved for hazardous locations (conduit models only) Wireless Connectivity Where You Need It SPECIFICATIONS The WzzardTM intelligent wireless sensor platform creates a complete, quick and easy connectivity stack between your sensors and application - on your network or the Internet. The platform uses Wzzard mesh sensor edge nodes and a wireless 802.15.4e SmartMesh IP network to transmit sensor data to a SmartSwarm Gateway. The gateway can connect to the Internet via wired connections or cellular data networks and communicate with application platforms using the MQTT IoT protocol and JSON data formats. POWER Wzzard mesh wireless sensor nodes can accommodate virtually any industry-standard external sensors. Connections can be made via M12 connector or conduit fitting. The nodes provide a wide variety of sensor interface options, including general purpose analog input, digital input/output and thermocouple. All nodes contain an internal temperature sensor. Connection Options Secure, Reliable and Highly Scalable Wireless Networking The 802.15.4e Wzzard platform uses mesh networking and timesynchronized channel hopping to provide up to 99.999% connectivity, even in the most demanding RF environments. New nodes may be added at any time and the SmartMesh IP network will dynamically self-configure as new nodes are added or removed. Easy Configuration and Installation Configuration of the Wzzard sensor platform is easy via the SmartSwarm Gateway. Nodes can be configured with scaling information, eng. units, friendly names, geo-location and other descriptive information. The platform simplifies physical installation, too. Nodes can be attached to any surface via mounting ear flanges and screws or the embedded magnetic base. Permanent use of the magnetic mount is not approved for UL installations, but may be convenient for temporary RF link determination or other purposes. The IP67 rated, fiber reinforced polyester PBT housing makes the units deployable in any industrial or commercial environment. Intelligence at the Network Edge The Wzzard wireless platform places intelligence at the network edge. The Wzzard mesh wireless sensor nodes can be configured to communicate data only when specified threshold or alert levels are exceeded. When reporting, they can associate useful information like geo-location, device name and uptime. This eliminates unnecessary network traffic, eases the processing burden on upstream resources and cuts the cost of cellular data plans when the gateway is using the cellular data network. Thanks to low-power wireless technology and programmable time synchronization, the Wzzard mesh wireless sensor nodes can operate for many years on battery power. orders@advantech-bb.com support@advantech-bb.com Internal (2) 3.6V 2400 mAH Lithium Thionyl Chloride AA Batteries Battery Life Optional External Input Voltage MECHANICAL >5 years - based on 1 min. sensor sampling and reporting Sensors External Antenna (included) Mounting Options 10-30 VDC @ 40mA peak Conduit (UL Type 3 outdoor approved): 12.7mm (0.5 in), - includes sensor interface cable, 8-wire, 26 gauge, 1.8m (6ft) M12 connector (Note UL rated for outdoor installations.) Analog Input (0-10 VDC, 0-20 mA, 4-20 mA) Digital Input (0 -48 VDC) Digital Input Frequency 1-1K Hz (accuracy +/- 1 Hz) Digital Input Counter Integrated Temperature Thermocouple (J, K, N, R, S, T, B, E) Digital Output, Sinking, up to 100mA @ 30VDC RP-SMA, Omni-directional, 3.8 dBi, 2.4 GHz Dimensions: 194 mm (7.64 in) (4) Mounting Ears, M5 (#10) screws (UL approved option) Magnetic Mounting (via internal magnet) Pull Force 2.13 kg (4.7 lb) Note: Magnetic mounting (all models) not rated for UL installations. Enclosure Weight TECHNOLOGY Wireless Protocols LED ENVIRONMENTAL Installation IP67 Rated - fiber reinforced polyester PBT 0.34 kg (0.75 lb) 802.15.4e, SmartMesh IP MQTT, JSON Network Connectivity Indoor/Outdoor Note: M12 models are rated for outdoor use (except in UL installations). Operating Temperature -40 to 80 C (-40 to 176 F) Storage Temperature -40 to 85 C (-40 to 185 F) Operating Humidity 0 to 95% Non-condensing WIRELESS SECURITY Device Authentication 128-bit, AES-based Encryption - with multiple keys Message Integrity Check (MIC) Synchronized Key Changeovers Customized Key Rotation BB-WSDx_WzzardMeshWirelessSensor-IndApps_4518ds All product specifications are subject to change without notice. Corporate Headquarters: 707 Dayton Road, PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax 433-5104 European Office: Westlink Commercial Park, Oranmore Co. Galway Ireland +353 91 792444 Fax +353 91 792445 WzzardTM Mesh Wireless Sensor for Industrial Applications Models BB-WSD2C31010, BB-WSD2M31010, BB-WSD2C21150, BB-WSD2C06010, BB-WSD2M06010 SENSOR INTERFACE SPECIFICATIONS DIGITAL INPUTS Voltage Range VIL VIH Pull-up Current Type Isolation RATE/FREQUENCY INPUTS Frequency COUNTER INPUT Counter Inputs Channels ANALOG INPUTS Analog Inputs Input Range Resolution Input Load Resistance Accuracy Variance THERMOCOUPLE INPUT Types Supported Accuracy 0-48 VDC 0.4 V, maximum 2.5 V, minimum 65 uA Sinking (NPN) Input None Performs a 1 second measurement at each measurement/publish interval Digital input frequency: 1-1KHz (accuracy +/- 1 Hz) Uses falling edge or rising edge - based on Invert Enabled Setting 1 Actively counts either falling edge (Invert Enabled) or rising edge (Invert Disabled) Can use a multiplier to convert to a unit type or count Shared with digital inputs Rolls over at 999999.9 2 or 3 (model dependent) 0-10 VDC, 0-20 mA (software selectable) 0.3 mV/1.3 uA 59 K Ohms +/-25mV +/-0.05mA J, K, N, R, S, T, B, E THERMOCOUPLE Type B Type E Type J Type K Type N Type R Type S Type T Resolution Accuracy Variance THERMISTOR INPUT Type Supported Temperature Range Resolution Accuracy Accuracy Variance Temperature Range +95 to +1798 C -200 to +1000 C -210 to +1200 C -200 to +1372 C -200 to +1300 C -50 to +1768 C -50 to +1768 C -200 to +400 C Ambient Temperature Worst Case RSS Error Probe Error B Type @ +25 C 9.4 C 0.5% of T, 0.25% of T B Type @ -40 to +85 C 47.1 C 0.5% of T, 0.25% of T C Type @ +25 C 1.4 C 1.7 C, 1 C C Type @ -40 to +85 C 5.2 C 1.7 C, 1 C J Type @ +25 C 1.5 C 2.2 C, 1.1 C J Type @ -40 to +85 C 5.9 C 2.2 C, 1.1 C K Type @ +25 C 1.8 C 2.2 C, 1.1 C K Type @ -40 to +85 C 7.3 C 2.2 C, 1.1 C N Type @ +25 C 2.3 C 2.2 C, 1.1 C N Type @ -40 to +85 C 10.3 C 2.2 C, 1.1 C R Type @ +25 C 5.4 C 1.5 C, 0.6 C R Type @ -40 to +85 C 26.0 C 1.5 C, 0.6 C S Type @ +25 C 6.7 C 1.5 C, 0.6 C S Type @ -40 to +85 C 33.0 C 1.5 C, 0.6 C T Type @ +25 C 1.7 C 1 C, 0.5 C T Type @ -40 to +85 C 7.2 C 1 C, 0.5 C 0.0078 C 0.20% of full-scale reading (0.25%, maximum) 10K NTC -40 to 85 C 0.01 C THERMISTOR Typ. Error Worst Case Error 853 ppm (0.1 C) 4103 ppm Maximum +/- 0.5 C over -40 to +85 C temperature range orders@advantech-bb.com support@advantech-bb.com Worst Case RSS Error 2101 ppm Probe Error n/a Corporate Headquarters: 707 Dayton Road, PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax 433-5104 European Office: Westlink Commercial Park, Oranmore Co. Galway Ireland +353 91 792444 Fax +353 91 792445 WzzardTM Mesh Wireless Sensor for Industrial Applications Models BB-WSD2C31010, BB-WSD2M31010, BB-WSD2C21150 SENSOR INTERFACE SPECIFICATIONS (cont'd) DIGITAL OUTPUTS Voltage Range Output Type Output Current Protection Isolation 0-30 VDC Open drain Not to be less than 100 mA Current limit protection None INTEGRATED SENSORS TEMPERATURE Offset Slope Error CONDITIONS Temperature Offset Error @ 25 C - SMARTMESH IP 802.15.4E RADIO SPECIFICATIONS PARAMETER Frequency Band Number of Channels Channel Separation Channel Clear Frequency Modulation Raw Data Rate Range Receiver Sensitivity Output Power CONDITIONS MINIMUM TYPICAL +/- 0.25 +/- 0.033 TYPICAL UNITS C C / C MINIMUM 2.400 TYPICAL MAXIMUM 2.4835 UNITS GHz Where k = 11 to 25, as defined by IEEE 802.4.15 IEEE 802.15.4 Direct Sequence Spread Spectrum (DSSS) 15 5 2405 + 5*(k-11) 25 C, 50% RH, +2dBi Omni-Directional Antenna, Antenna 2m above ground Indoor Outdoor Packet Data Error Rate (PER) = 1% PER = 50% Delivered to a 50 load MHz MHz 250 kbps 100 300 m m dBm dBm dBm -93 -95 8 THIONYL CHLORIDE LITHIUM BATTERIES (2 supplied with product) CHARACTERISTICS Temperature Range Nominal Capacity Nominal Voltage Diameter Height CONDITIONS -40 to +85 C 2.4 Ah 3.6 V 14.5mm 50.5mm *Potential Hazard: Do not recharge, crush, disassemble or heat above 100 C (212 F). ORDERING INFORMATION MODEL NUMBER DESCRIPTION INCLUDES: BB-WSD2C31010 Industrial Power Monitor Node - Conduit 3 Analog Inputs, 1 Digital Input, Internal Temperature BB-WSD2M31010 Industrial Power Monitor Node - M12 3 Analog Inputs, 1 Digital Input, Internal Temperature BB-WSD2C21150 Industrial Cooler/HVAC Node - Conduit 2 Analog Inputs, 1 Digital Input, 1 Digital Output, 2 Thermocouples, 2 Thermistors, Internal Temperature BB-WSD2C06010 Industrial Digital Input Node - Conduit 6 Digital Inputs, Internal Temperature BB-WSD2M06010 Industrial Digital Input Node - M12 6 Digital Inputs, Internal Temperature UL Indoor / Outdoor, w/ mounting ear installation Indoor Only, w/ mounting ear installation Indoor / Outdoor, w/ mounting ear installation Indoor / Outdoor, w/ mounting ear installation Indoor Only, w/ mounting ear installation ACCESSORIES - sold separately ACH2-DBAT-DP002 ACH2-AT-DP011-G BB-WCD-TM2M WSCACO-6 WSCAC12-6 ZXTMT External antenna, 2.4 GHz, 2 dBi, dipole, RP-SMA, hinged, 3.8 dBi Magnetic mount antenna, 2.4 GHz, 3.8 dBi Thermistor cable Pigtail cable, 1.8 m (6 ft.) M12 wiring har ness cable, 8-pin, 1.8 m (6 ft.) Cable gland/conduit kit BB-2X3.6VLTCAA (2) Replacement batteries, AA lithium thionyl chloride battery. Notes: Node requires two (2) batteries. UL application approved battery. orders@advantech-bb.com support@advantech-bb.com Corporate Headquarters: 707 Dayton Road, PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax 433-5104 European Office: Westlink Commercial Park, Oranmore Co. Galway Ireland +353 91 792444 Fax +353 91 792445 WzzardTM Mesh Wireless Sensor for Industrial Applications Models BB-WSD2C31010, BB-WSD2M31010, BB-WSD2C21150 APPROVALS, DIRECTIVES, STANDARDS CE - DIRECTIVES 2014/35/EU Low Voltage Directive 2014/53/EU Radio Equipment Directive 2011/65/EU Reduction of Hazardous Substances Directive (RoHS) 2012/19/EU Waste Electrical and Electronic Equipment Directive (WEEE) CE - EMC ETSI EN 301 489-1 v2.1.1 ETSI EN 301 489-17 v3.2.0 EN 55032:2012+AC, Class A EMC & Radio Spectrum Matters (ERM) Wideband Transmission Systems, 2.4 GHz ISM Band Applied in accordance with the specific requirements of: EMC and Radio Spectrum Matters: Broadband Data Systems Information Technology Equipment - RF Emissions EN 55024 Information Technology Equipment - Immunity Characteristics - Limits and Methods of Measurement ETSI EN 300 328 v2.1.1 CE - SAFETY EN/IEC 61010-1 (3rd Ed.) EN/IEC 61010-2-201 (1st Ed.) CE - RF EXPOSURE EN 62479 ENVIRONMENTAL Safety requirements for electrical equipment for measurement, control, and laboratory use (general requirements). Particular requirements for control equipment Assessment of the compliance of low power electronics and electrical equipment wiht the basic restrictions related to human exposure to electromagnetic fields (10 MHz to 300 MHz) IEC 60068-2-6 Sine Vibration: 4G, 10-500 Hz, 0.06 in. displacement IEC 60068-2-27 Mechanical Shock: 50G, 11ms, 18 pulses FCC, IC FCC Part 15 Class A, FCC Part 15.247 ICES-003 ITE Emissions for Canada UL (All models w/ mounting ear installation; M12 model indoors only.) UL/CSA Class 1/Division 2, Groups A, B, C, D (Conduit Models Only) MECHANICAL DIAGRAM Units = [Millimeters] Inches orders@advantech-bb.com support@advantech-bb.com Corporate Headquarters: 707 Dayton Road, PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax 433-5104 European Office: Westlink Commercial Park, Oranmore Co. Galway Ireland +353 91 792444 Fax +353 91 792445