Battery Holders Battery Holders SMT and Through Hole Specifications * * * Holder material: heat resistant, glass fiber filled LCP. Flammability rating UL 94 V-0 Battery contacts: spring stainless steel 301 nickel plated throughout, thickness 10m. Solder area tin/lead plated throughout, thickness 10m. The contact resistance of the (+) and (-) contacts to the cell is less than 100mOhm (measured through AC 1kHz). Characteristics * * * * * * * * * Easy and fast replacement of battery Designed for automatic "pick and place" mounting Safe retention of button cell Automated battery mounting possible Clear separation of connections Safety against short circuits Safety against inverse polarity (polarized) Safety against leak currents Solid design Rev. 10/02 Renata SA CH-4452 Itingen/Switzerland Tel. +41 (0)61 975 75 75 Fax. +41 (0)61 975 75 95 sales@renata.com www.renata.com Battery Holders Battery Holders SMT and Through Hole (cont.) SMT Battery Holders RENATA No. SMTU1225-1 SMTU1632-1 SMTU2032-1 SMTU2430-1 SMTU2450N-1 SMTU2477N-1 For use with RENATA cell CR1225 CR1632 CR2032 CR2430 CR2450N CR2477N Maximum dimensions (mm) Weight (g) A B C D E F 0.70 0.80 0.95 1.05 1.45 1.65 23.7 27.7 32.0 36.5 36.6 36.7 20.3 24.3 28.5 33.0 33.0 33.0 12.5 16.0 20.0 24.5 24.5 24.5 12.7 14.5 16.1 16.1 16.1 16.1 4.8 5.4 5.4 4.9 7.5 10.3 21.1 25.1 29.3 33.8 33.8 33.8 Rev. 10/02 Renata SA CH-4452 Itingen/Switzerland Tel. +41 (0)61 975 75 75 Fax. +41 (0)61 975 75 95 sales@renata.com www.renata.com Battery Holders Battery Holders SMT and Through Hole (cont.) Through Hole RENATA No. HU1225-1 HU1632-1 HU2032-1 HU2430-1 HU2450N-1 HU2477N-1 For use with RENATA cell CR1225 CR1632 CR2032 CR2430 CR2450N CR2477N Weight Maximum dimensions (mm) (g) B C D E F 0.70 0.80 0.95 1.05 1.45 1.65 20.3 24.3 28.5 33.0 33.0 33.0 12.5 16.0 20.0 24.5 24.5 24.5 12.7 14.5 16.1 16.1 16.1 16.1 4.6 5.2 5.2 4.7 7.3 10.1 18.7 22.7 26.9 31.5 31.5 31.5 Rev. 10/02 Renata SA CH-4452 Itingen/Switzerland Tel. +41 (0)61 975 75 75 Fax. +41 (0)61 975 75 95 sales@renata.com www.renata.com Battery Holders Battery Holders SMT and Through Hole (cont.) Tape & Reel Packing for SMTU-Battery Holders - Technical Specifications Dimensions and Quantities RENATA No. Quantity per reel Dimensions (mm) A B C D E SMTU1225-1.TR SMTU1632-1.TR SMTU2032-1.TR SMTU2430-1.TR 750 pcs. 520 pcs. 485 pcs. 44.0 44.0 44.0 40.4 40.4 40.4 16.0 20.0 24.0 20.2 20.2 20.2 5.7 6.1 6.0 490 pcs. 56.0 52.4 24.0 26.2 5.7 SMTU2450N-1.TR SMTU2477N-1.TR 350 pcs. 250 pcs. 56.0 56.0 52.4 52.4 24.0 24.0 26.2 26.2 8.2 10.8 Notes: 1. 10 sprocket hole pitch cumulative tolerance +/- .02 2. Camber not to exceed 1 mm in 100 mm Rev. 10/02 Renata SA CH-4452 Itingen/Switzerland Tel. +41 (0)61 975 75 75 Fax. +41 (0)61 975 75 95 sales@renata.com www.renata.com Battery Holders Battery Holders SMT and Through Hole (cont.) Notes (cont.): 3. Material: Black Conductive Advantek Polystyrene 4. E measured from a plane on the inside bottom of the pocket to the top surface of the carrier 5. Pocket position relative to sprocket hole measured as true position of pocket, not pocket hole Dimensions of Antistatic Packaging Reels RENATA No. Dimensions (mm) W max. SMTU1225-1.TR SMTU1632-1.TR SMTU2032-1.TR SMTU2430-1.TR 50.2 50.2 50.2 SMTU2450N-1.TR SMTU2477N-1.TR 62.2 62.2 62.2 All packaging materials comply with relevant EIA, EIAJ and IEC specifications Rev. 10/02 Renata SA CH-4452 Itingen/Switzerland Tel. +41 (0)61 975 75 75 Fax. +41 (0)61 975 75 95 sales@renata.com www.renata.com