Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
Low impedance, 105℃
KZNSeries
・Adoption of innovative high stability electrolyte
・High ripple current and long endurance
・Rated voltage range : 6.3 to 100Vdc, Capacitance range : 8.2 to 22,000µF
・Endurance with ripple current : 6,000 to 10,000 hours at 105℃
・Non solvent resistant type
・RoHS2 Compliant
◆SPECIFICATIONS
Items Characteristics
Category
Temperature Range -40 to +105℃
Rated Voltage Range
6.3 to 100Vdc
Capacitance Tolerance
±20% (M) (at 20℃, 120Hz)
Leakage Current I=0.01CV or 3µA, whichever is greater.
Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) (at 20℃ after 2 minutes)
Dissipation Factor
(tanδ)
Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V 63V 80V 100V
tanδ (Max.) 0.22 0.19 0.16 0.14 0.12 0.10 0.09 0.09 0.08
When nominal capacitance exceeds 1,000µF, add 0.02 to the value above for each 1,000µF increase. (at 20℃, 120Hz)
Low Temperature
Characteristics
(Max. Impedance Ratio)
Z (-25℃) / Z (+20℃)
2max.
Z (-40℃) / Z (+20℃)
3max.
(at 120Hz)
Endurance The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated
ripple current is applied (the peak voltage shall not exceed the rated voltage) for the specified period of time at 105℃.
Time
Case size φ5&φ6.3 φ8×11.5L φ10×12.5L
φ8×15L, 20L
φ10×16L, 20L, 25L
φ12.5 to φ18
6.3Vdc 6,000 hours 8,000 hours 9,000 hours 9,000 hours 10,000 hours
10 to 50Vdc 7,000 hours 9,000 hours 9,000 hours 10,000 hours 10,000 hours
63 to 100Vdc 6,000 hours 8,000 hours 9,000 hours 9,000 hours 10,000 hours
Capacitance change ≦±25% of the initial value (6.3, 10Vdc : ≦±30%)
D.F. (tanδ)≦200% of the initial specified value
Leakage current ≦The initial specified value
Shelf Life The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 500 hours at 105℃ without
voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.
Capacitance change ≦±25% of the initial value (6.3, 10Vdc : ≦±30%)
D.F. (tanδ)≦200% of the initial specified value
Leakage current ≦The initial specified value
◆DIMENSIONS [mm]
Sleeve(PET : Brown)
L' 15min. 4min.
φD'
φd
Vent
(Except φ5 & φ6.3)
●
Terminal Code : E
F
±
0.5
F
±
0.5
(φ5 to 10) (φ12.5 to 18)
Gas escape end seal
φD
φd
F
D'
L'
8
0.6
3.5
6.3
0.5
2.5
5
0.5
2.0
10
0.6
5.0
12.5
0.6
5.0
16
0.8
7.5
18
0.8
7.5
φD＋0.5max.
L＋1.5max.
◆PART NUMBERING SYSTEM
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 100
µ
F:101, 3,900
µ
F:392)
Lead forming·taping code
Terminal code
Voltage code (ex. 16V:160 50V:500)
Series code
Category
E K Z N A A A EA A A A A A A A NM
1 3 42 6 7 8 9 10 13125 18171611 1514
Please refer to "Product code guide (radial lead type)"
Higher ripple
KZN
KZM
CAT. No. E1001S
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
Low impedance, 105℃
KZNSeries
◆STANDARD RATINGS
WV
(V
dc
)
Cap
(µF)
Case size
φD×L(mm)
Impedance
(Ω max./100kHz)
Rated
ripple
current
(mArms/
105℃,
100kHz)
Part No. WV
(V
dc
)
Cap
(µF)
Case size
φD×L(mm)
Impedance
(Ω max./100kHz)
Rated
ripple
current
(mArms/
105℃,
100kHz)
Part No.
20℃-10℃20℃-10℃
6.3
220 5×11 0.38 1.2 345
EKZN6R3E□□221ME11D
16
3,300 12.5×30 0.018 0.054 3,660
EKZN160E□□332MK30S
470 6.3×11 0.17 0.51 540
EKZN6R3E□□471MF11D
3,900 12.5×35 0.016 0.048 4,120
EKZN160E□□392MK35S
820 8×11.5 0.075 0.23 945
EKZN6R3E□□821MHB5D
3,900 16×20 0.021 0.063 3,330
EKZN160E□□392ML20S
1,200 8×15 0.059 0.18 1,250
EKZN6R3E□□122MH15D
4,700 18×20 0.020 0.060 3,450
EKZN160E□□472MM20S
1,200 10×12.5 0.053 0.16 1,330
EKZN6R3E□□122MJC5S
5,600 16×25 0.017 0.051 3,810
EKZN160E□□562ML25S
1,500 8×20 0.041 0.13 1,500
EKZN6R3E□□152MH20D
6,800 16×31.5 0.016 0.048 4,100
EKZN160E□□682MLN3S
1,800 10×16 0.038 0.12 1,760
EKZN6R3E□□182MJ16S
6,800 18×25 0.016 0.048 3,880
EKZN160E□□682MM25S
2,700 10×20 0.028 0.084 1,960
EKZN6R3E□□272MJ20S
8,200 16×35.5 0.014 0.042 4,280
EKZN160E□□822MLP1S
2,700 12.5×16 0.035 0.11 1,900
EKZN6R3E□□272MK16S
8,200 18×31.5 0.014 0.042 4,190
EKZN160E□□822MMN3S
3,300 10×25 0.026 0.072 2,250
EKZN6R3E□□332MJ25S
10,000 16×40 0.013 0.039 4,580
EKZN160E□□103ML40S
3,900 12.5×20 0.025 0.075 2,480
EKZN6R3E□□392MK20S
10,000 18×35.5 0.012 0.036 4,380
EKZN160E□□103MMP1S
5,600 12.5×25 0.019 0.057 2,900
EKZN6R3E□□562MK25S
12,000 18×40 0.011 0.033 4,960
EKZN160E□□123MM40S
6,800 12.5×30 0.018 0.054 3,450
EKZN6R3E□□682MK30S
25
68 5×11 0.38 1.2 450
EKZN250E□□680ME11D
6,800 16×20 0.021 0.063 3,250
EKZN6R3E□□682ML20S
150 6.3×11 0.17 0.51 700
EKZN250E□□151MF11D
8,200 12.5×35 0.016 0.048 3,570
EKZN6R3E□□822MK35S
270 8×11.5 0.075 0.23 1,200
EKZN250E□□271MHB5D
8,200 18×20 0.020 0.060 3,450
EKZN6R3E□□822MM20S
470 8×15 0.059 0.18 1,600
EKZN250E□□471MH15D
10,000 16×25 0.017 0.051 3,630
EKZN6R3E□□103ML25S
470 10×12.5 0.053 0.16 1,700
EKZN250E□□471MJC5S
12,000 16×31.5 0.016 0.048 4,100
EKZN6R3E□□123MLN3S
560 8×20 0.041 0.13 1,960
EKZN250E□□561MH20D
12,000 18×25 0.016 0.048 3,880
EKZN6R3E□□123MM25S
680 10×16 0.038 0.12 2,000
EKZN250E□□681MJ16S
15,000 16×35.5 0.014 0.042 4,280
EKZN6R3E□□153MLP1S
820 10×20 0.028 0.084 2,500
EKZN250E□□821MJ20S
15,000 18×31.5 0.014 0.042 4,190
EKZN6R3E□□153MMN3S
1,000 12.5×16 0.035 0.11 2,400
EKZN250E□□102MK16S
18,000 16×40 0.013 0.039 4,580
EKZN6R3E□□183ML40S
1,200 10×25 0.026 0.072 2,900
EKZN250E□□122MJ25S
18,000 18×35.5 0.012 0.036 4,380
EKZN6R3E□□183MMP1S
1,500 12.5×20 0.025 0.075 2,600
EKZN250E□□152MK20S
22,000 18×40 0.011 0.033 4,960
EKZN6R3E□□223MM40S
1,800 12.5×25 0.019 0.057 3,200
EKZN250E□□182MK25S
10
150 5×11 0.38 1.2 450
EKZN100E□□151ME11D
2,200 12.5×30 0.018 0.054 3,660
EKZN250E□□222MK30S
330 6.3×11 0.17 0.51 700
EKZN100E□□331MF11D
2,200 16×20 0.021 0.063 3,330
EKZN250E□□222ML20S
560 8×11.5 0.075 0.23 1,200
EKZN100E□□561MHB5D
2,700 12.5×35 0.016 0.048 4,120
EKZN250E□□272MK35S
820 8×15 0.059 0.18 1,600
EKZN100E□□821MH15D
3,300 16×25 0.017 0.051 3,810
EKZN250E□□332ML25S
1,000 8×20 0.041 0.13 1,960
EKZN100E□□102MH20D
3,300 18×20 0.020 0.060 3,450
EKZN250E□□332MM20S
1,000 10×12.5 0.053 0.16 1,700
EKZN100E□□102MJC5S
4,700 16×31.5 0.016 0.048 4,100
EKZN250E□□472MLN3S
1,200 10×16 0.038 0.12 2,000
EKZN100E□□122MJ16S
4,700 18×25 0.016 0.048 3,880
EKZN250E□□472MM25S
1,800 10×20 0.028 0.084 2,500
EKZN100E□□182MJ20S
5,600 16×35.5 0.014 0.042 4,280
EKZN250E□□562MLP1S
1,800 12.5×16 0.035 0.11 2,400
EKZN100E□□182MK16S
5,600 18×31.5 0.014 0.042 4,190
EKZN250E□□562MMN3S
2,200 10×25 0.026 0.072 2,900
EKZN100E□□222MJ25S
6,800 16×40 0.013 0.039 4,580
EKZN250E□□682ML40S
2,700 12.5×20 0.025 0.075 2,600
EKZN100E□□272MK20S
6,800 18×35.5 0.012 0.036 4,380
EKZN250E□□682MMP1S
3,900 12.5×25 0.019 0.057 3,200
EKZN100E□□392MK25S
8,200 18×40 0.011 0.033 4,960
EKZN250E□□822MM40S
4,700 12.5×30 0.018 0.054 3,660
EKZN100E□□472MK30S
35
47 5×11 0.38 1.2 450
EKZN350E□□470ME11D
4,700 16×20 0.021 0.063 3,330
EKZN100E□□472ML20S
100 6.3×11 0.17 0.51 700
EKZN350E□□101MF11D
5,600 12.5×35 0.016 0.048 4,120
EKZN100E□□562MK35S
180 8×11.5 0.075 0.23 1,200
EKZN350E□□181MHB5D
5,600 18×20 0.020 0.060 3,450
EKZN100E□□562MM20S
220 8×15 0.059 0.18 1,600
EKZN350E□□221MH15D
6,800 16×25 0.017 0.051 3,810
EKZN100E□□682ML25S
270 10×12.5 0.053 0.16 1,700
EKZN350E□□271MJC5S
8,200 16×31.5 0.016 0.048 4,100
EKZN100E□□822MLN3S
330 8×20 0.041 0.13 1,960
EKZN350E□□331MH20D
8,200 18×25 0.016 0.048 3,880
EKZN100E□□822MM25S
390 10×16 0.038 0.12 2,000
EKZN350E□□391MJ16S
10,000 16×35.5 0.014 0.042 4,280
EKZN100E□□103MLP1S
470 10×20 0.028 0.084 2,500
EKZN350E□□471MJ20S
10,000 18×31.5 0.014 0.042 4,190
EKZN100E□□103MMN3S
560 12.5×16 0.035 0.11 2,400
EKZN350E□□561MK16S
12,000 16×40 0.013 0.039 4,580
EKZN100E□□123ML40S
680 10×25 0.026 0.072 2,900
EKZN350E□□681MJ25S
12,000 18×35.5 0.012 0.036 4,380
EKZN100E□□123MMP1S
820 12.5×20 0.025 0.075 2,600
EKZN350E□□821MK20S
15,000 18×40 0.011 0.033 4,960
EKZN100E□□153MM40S
1,200 12.5×25 0.019 0.057 3,200
EKZN350E□□122MK25S
16
120 5×11 0.38 1.2 450
EKZN160E□□121ME11D
1,500 12.5×30 0.018 0.054 3,660
EKZN350E□□152MK30S
270 6.3×11 0.17 0.51 700
EKZN160E□□271MF11D
1,500 16×20 0.021 0.063 3,330
EKZN350E□□152ML20S
470 8×11.5 0.075 0.23 1,200
EKZN160E□□471MHB5D
1,800 12.5×35 0.016 0.048 4,120
EKZN350E□□182MK35S
680 8×15 0.059 0.18 1,600
EKZN160E□□681MH15D
1,800 16×25 0.017 0.051 3,810
EKZN350E□□182ML25S
680 10×12.5 0.053 0.16 1,700
EKZN160E□□681MJC5S
1,800 18×20 0.020 0.060 3,450
EKZN350E□□182MM20S
820 8×20 0.041 0.13 1,960
EKZN160E□□821MH20D
2,700 16×31.5 0.016 0.048 4,100
EKZN350E□□272MLN3S
1,000 10×16 0.038 0.12 2,000
EKZN160E□□102MJ16S
2,700 18×25 0.016 0.048 3,880
EKZN350E□□272MM25S
1,500 10×20 0.028 0.084 2,500
EKZN160E□□152MJ20S
3,300 16×35.5 0.014 0.042 4,280
EKZN350E□□332MLP1S
1,500 12.5×16 0.035 0.11 2,400
EKZN160E□□152MK16S
3,300 18×31.5 0.014 0.042 4,190
EKZN350E□□332MMN3S
1,800 10×25 0.026 0.072 2,900
EKZN160E□□182MJ25S
3,900 16×40 0.013 0.039 4,580
EKZN350E□□392ML40S
2,200 12.5×20 0.025 0.075 2,600
EKZN160E□□222MK20S
3,900 18×35.5 0.012 0.036 4,380
EKZN350E□□392MMP1S
2,700 12.5×25 0.019 0.057 3,200
EKZN160E□□272MK25S
4,700 18×40 0.011 0.033 4,960
EKZN350E□□472MM40S
□□ : Enter the appropriate lead forming or taping code.
CAT. No. E1001S
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
Low impedance, 105℃
KZNSeries
◆STANDARD RATINGS
WV
(V
dc
)
Cap
(µF)
Case size
φD×L(mm)
Impedance
(Ω max./100kHz)
Rated
ripple
current
(mArms/
105℃,
100kHz)
Part No. WV
(V
dc
)
Cap
(µF)
Case size
φD×L(mm)
Impedance
(Ω max./100kHz)
Rated
ripple
current
(mArms/
105℃,
100kHz)
Part No.
20℃-10℃20℃-10℃
50
27 5×11 0.40 1.3 450
EKZN500E□□270ME11D
80
12 5×11 0.72 3.2 220
EKZN800E□□120ME11D
56 6.3×11 0.18 0.54 700
EKZN500E□□560MF11D
27 6.3×11 0.34 1.5 370
EKZN800E□□270MF11D
100 8×11.5 0.085 0.26 1,200
EKZN500E□□101MHB5D
47 8×11.5 0.20 0.90 620
EKZN800E□□470MHB5D
120 8×15 0.065 0.20 1,600
EKZN500E□□121MH15D
68 8×15 0.14 0.63 780
EKZN800E□□680MH15D
150 10×12.5 0.073 0.22 1,280
EKZN500E□□151MJC5S
82 8×20 0.12 0.54 1,040
EKZN800E□□820MH20D
180 8×20 0.049 0.16 1,960
EKZN500E□□181MH20D
82 10×12.5 0.14 0.56 780
EKZN800E□□820MJC5S
220 10×16 0.053 0.16 1,650
EKZN500E□□221MJ16S
120 10×16 0.090 0.36 1,040
EKZN800E□□121MJ16S
330 10×20 0.038 0.12 2,060
EKZN500E□□331MJ20S
180 10×20 0.068 0.28 1,430
EKZN800E□□181MJ20S
330 12.5×16 0.045 0.14 2,160
EKZN500E□□331MK16S
180 12.5×16 0.090 0.27 1,430
EKZN800E□□181MK16S
390 10×25 0.032 0.10 2,420
EKZN500E□□391MJ25S
220 10×25 0.055 0.22 1,620
EKZN800E□□221MJ25S
470 12.5×20 0.032 0.10 2,300
EKZN500E□□471MK20S
270 12.5×20 0.048 0.15 1,750
EKZN800E□□271MK20S
680 12.5×25 0.025 0.080 2,800
EKZN500E□□681MK25S
390 12.5×25 0.038 0.12 2,210
EKZN800E□□391MK25S
820 12.5×30 0.023 0.074 3,370
EKZN500E□□821MK30S
470 12.5×30 0.033 0.11 2,400
EKZN800E□□471MK30S
820 16×20 0.026 0.084 3,070
EKZN500E□□821ML20S
470 16×20 0.036 0.12 1,950
EKZN800E□□471ML20S
1,000 12.5×35 0.021 0.067 3,810
EKZN500E□□102MK35S
560 12.5×35 0.026 0.078 2,600
EKZN800E□□561MK35S
1,200 16×25 0.022 0.070 3,510
EKZN500E□□122ML25S
680 16×25 0.028 0.084 2,430
EKZN800E□□681ML25S
1,200 18×20 0.025 0.075 3,120
EKZN500E□□122MM20S
680 18×20 0.032 0.096 2,270
EKZN800E□□681MM20S
1,500 16×31.5 0.019 0.057 4,030
EKZN500E□□152MLN3S
820 16×31.5 0.022 0.066 2,640
EKZN800E□□821MLN3S
1,500 18×25 0.021 0.063 3,530
EKZN500E□□152MM25S
820 18×25 0.027 0.081 2,500
EKZN800E□□821MM25S
1,800 16×35.5 0.016 0.048 4,220
EKZN500E□□182MLP1S
1,000 16×35.5 0.020 0.060 2,860
EKZN800E□□102MLP1S
2,200 16×40 0.014 0.042 4,500
EKZN500E□□222ML40S
1,200 16×40 0.018 0.054 3,510
EKZN800E□□122ML40S
2,200 18×31.5 0.016 0.048 4,080
EKZN500E□□222MMN3S
1,200 18×31.5 0.020 0.060 2,860
EKZN800E□□122MMN3S
2,700 18×35.5 0.013 0.039 4,270
EKZN500E□□272MMP1S
1,500 18×35.5 0.018 0.054 3,510
EKZN800E□□152MMP1S
3,300 18×40 0.012 0.036 4,850
EKZN500E□□332MM40S
1,800 18×40 0.017 0.051 3,860
EKZN800E□□182MM40S
63
18 5×11 0.52 2.3 240
EKZN630E□□180ME11D
100
8.2 5×11 0.72 3.2 220
EKZN101E□□8R2ME11D
39 6.3×11 0.24 1.1 420
EKZN630E□□390MF11D
18 6.3×11 0.34 1.5 370
EKZN101E□□180MF11D
68 8×11.5 0.15 0.68 720
EKZN630E□□680MHB5D
33 8×11.5 0.20 0.90 620
EKZN101E□□330MHB5D
100 8×15 0.10 0.45 990
EKZN630E□□101MH15D
47 8×15 0.14 0.63 780
EKZN101E□□470MH15D
120 8×20 0.077 0.35 1,200
EKZN630E□□121MH20D
56 8×20 0.12 0.54 1,040
EKZN101E□□560MH20D
120 10×12.5 0.090 0.36 990
EKZN630E□□121MJC5S
56 10×12.5 0.14 0.56 780
EKZN101E□□560MJC5S
180 10×16 0.061 0.25 1,200
EKZN630E□□181MJ16S
82 10×16 0.090 0.36 1,040
EKZN101E□□820MJ16S
270 10×20 0.045 0.18 1,570
EKZN630E□□271MJ20S
100 10×20 0.068 0.28 1,430
EKZN101E□□101MJ20S
270 12.5×16 0.058 0.18 1,570
EKZN630E□□271MK16S
120 12.5×16 0.090 0.27 1,430
EKZN101E□□121MK16S
330 10×25 0.037 0.12 1,990
EKZN630E□□331MJ25S
150 10×25 0.055 0.22 1,620
EKZN101E□□151MJ25S
390 12.5×20 0.033 0.10 1,990
EKZN630E□□391MK20S
180 12.5×20 0.048 0.15 1,750
EKZN101E□□181MK20S
560 12.5×25 0.026 0.080 2,460
EKZN630E□□561MK25S
220 12.5×25 0.038 0.12 2,210
EKZN101E□□221MK25S
680 12.5×30 0.024 0.075 2,760
EKZN630E□□681MK30S
270 12.5×30 0.033 0.11 2,400
EKZN101E□□271MK30S
680 16×20 0.027 0.085 2,380
EKZN630E□□681ML20S
270 16×20 0.036 0.12 1,950
EKZN101E□□271ML20S
820 12.5×35 0.022 0.068 3,040
EKZN630E□□821MK35S
390 12.5×35 0.026 0.078 2,600
EKZN101E□□391MK35S
820 18×20 0.026 0.078 2,530
EKZN630E□□821MM20S
390 16×25 0.028 0.084 2,430
EKZN101E□□391ML25S
1,000 16×25 0.024 0.072 2,890
EKZN630E□□102ML25S
390 18×20 0.032 0.096 2,270
EKZN101E□□391MM20S
1,200 16×31.5 0.020 0.060 3,280
EKZN630E□□122MLN3S
470 16×31.5 0.022 0.066 2,640
EKZN101E□□471MLN3S
1,200 18×25 0.022 0.066 2,930
EKZN630E□□122MM25S
560 16×35.5 0.020 0.060 2,860
EKZN101E□□561MLP1S
1,500 16×35.5 0.018 0.054 3,440
EKZN630E□□152MLP1S
560 18×25 0.027 0.081 2,500
EKZN101E□□561MM25S
1,500 18×31.5 0.018 0.054 3,380
EKZN630E□□152MMN3S
680 16×40 0.018 0.054 3,510
EKZN101E□□681ML40S
1,800 16×40 0.016 0.048 3,690
EKZN630E□□182ML40S
680 18×31.5 0.020 0.060 2,860
EKZN101E□□681MMN3S
1,800 18×35.5 0.017 0.051 3,550
EKZN630E□□182MMP1S
820 18×35.5 0.018 0.054 3,510
EKZN101E□□821MMP1S
2,200 18×40 0.015 0.045 3,930
EKZN630E□□222MM40S
1,000 18×40 0.017 0.051 3,860
EKZN101E□□102MM40S
□□ : Enter the appropriate lead forming or taping code.
◆RATED RIPPLE CURRENT MULTIPLIERS
・Frequency Multipliers
Frequency(Hz)
Capacitance(µF)
120 1k 10k 100k
8.2 to 180 0.40 0.75 0.90 1.00
220 to 560 0.50 0.85 0.94 1.00
680 to 1,800 0.60 0.87 0.95 1.00
2,200 to 3,900 0.75 0.90 0.95 1.00
4,700 to 22,000 0.85 0.95 0.98 1.00
Note : The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise.
When long life performance is required in actual use, the rms ripple current has to be reduced.
CAT. No. E1001S
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS
